2001 Chrysler Pt Cruiser Limited Wagon 4-door 2.4l on 2040-cars

Auto blog

Fiat Chrysler expands Takata airbag recall to 3.3M vehicles

Fiat Chrysler Automobiles is expanding its recall of vehicles equipped with Takata airbags, moving beyond Florida, Hawaii, Puerto Rico and the US Virgin Islands to the greater US, as well as Mexico, Canada and beyond. The affected vehicles, some 3.3 million in total, were built between 2004 and 2007, with many models, including the Dodge Ram 1500, 2500 and 3500, Durango and the Chrysler 300, having been affected by Chrysler's previous recall. Despite the somewhat alarming nature that comes with a recall of this many vehicles, it seems that Chrysler is moving more out of an abundance of caution (and federal pressure) than anything else, saying: "Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles." Owners of affected vehicles will be notified and asked to report to dealers for a free replacement driver's side airbag. Scroll down for the official press release from FCA. Statement: Global Air-Bag Inflator Replacement December 19, 2014 , Auburn Hills, Mich. - FCA US LLC will replace driver's-side air-bag inflators in an estimated 3.3 million older-model vehicles worldwide, in an expansion of an ongoing regional field action. Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles. Outside of Florida, one of the areas covered by the original action, no FCA US vehicle has been linked to an air-bag deployment of the type that has raised public concern. Nevertheless, the Company is replacing the Takata components tied to that concern. FCA US is aware of one related injury involving one of its vehicles, an older-model sedan. It occurred in a southern Florida region marked by persistent, high, absolute humidity – a condition believed to be a contributing factor in the air-bag deployments under investigation.

Chrysler recalling 31k SUVs and vans

Chrysler is issuing recalls covering roughly 31,700 vehicles worldwide due to two separate problems. In both cases the company believes that most of the affected vehicles are either still on, or in transit to, dealer lots.
One recall covers roughly 10,700 Dodge Durango, Jeep Cherokee, Grand Cherokee and Grand Cherokee SRT models from the 2014 model year built between January 16 and April 17, 2014. The SUVs need a software update for the cruise control. It's possible that when the cruise is on and the driver presses on the throttle, the acceleration could last a second after the pedal is released or two seconds for the SRT. Afterward, they return to the speed originally set by the driver.
Chrysler says it isn't aware of any accidents, injuries or even reported incidents of this happening in the real world. Also, in all cases, if the driver presses on the brake, the cruise shuts off. The automaker believes that there are about 6,100 affected SUVs in the US, 950 in Canada, 425 in Mexico and 3,200 outside of North America. The software upgrade will be ready shortly, the company says.

Almost 70 percent of FCA-PSA Groupe models to ride on two PSA platforms

With the merger between PSA Groupe and Fiat Chrysler having been officially announced this week, we still don't know where everything will settle once the process concludes. We covered the catalog of models herded by the combined company's 12 brands, all of which will remain for now. Profound changes must be afoot somewhere, though, else there'd be no reason for the tie-up. Automotive News has a report on one of the big moves, writing that "more than two-thirds of [PSA-FCA] production would be concentrated on just two platforms." Around 2.6 million cars built by the combined company would sit on PSA's Common Modular Platform, also known as the EMP1, for B-segment city cars, entry-level and mid-range C-segment sedans, and compact crossovers. Three million vehicles would ride on the EMP2 architecture intended for C- and D-segment cars and higher-end crossovers. Those figures account for around 5.6 of the 8.7 million vehicles the combined company expects to sell annually. AN didn't mention the Giorgio platform that's already spread throughout the FCA kingdom to support numerous current and future offerings like the next-gen Jeep Grand Cherokee, but did write that "larger Jeep models will continue to use FCA underpinnings." The body-on-frame chassis' under Ram trucks and the Jeep Wrangler and Gladiator should hold pat. We'll wait for word on the fate of the Compact U.S. Wide platform carrying the Chrysler Voyager and Pacifica and Jeep Cherokee. Dodge products with questionable futures are anyone's guess; we've heard the Dodge Durango, still built on a Mercedes-derived platform it shares with the current Grand Cherokee, could go body-on-frame for the next generation, or die and have the Giorgio-based, three-row Jeep Grand Cherokee take its place. More mystery comes with the long-lived LA and LD platforms in the big sedan and coupe trio Chrysler and Dodge still milk quite successfully. And if there were ever a time for the Dodge Journey – last reported as a Giorgio recipient – to modernize or die, we don't know when that time is. Although FCA platforms have been designed with alternative powertrains in mind, AN says the PSA Groupe architectures "are more modern than FCA's equivalent platforms." After PSA acquired GM's Opel/Vauxhall division, the French company didn't waste time moving the Anglo-German products to in-house platforms, helping to put the formerly money-losing operations into the black in just 18 months.