2004 Chrysler Crossfire on 2040-cars

Auto blog

Suppliers love Toyota and Honda: Why that matters to you

You might think that a survey of automotive suppliers and their relationship with OEMs is the automotive equivalent of nerd prom. In some ways that's what the North American Automotive OEM-Supplier Working Relations Index (WRI) is. The study, the 17th annual conducted by Planning Perspectives Inc., is based on input from 652 salespeople from 108 Tier One suppliers, or, PPI points out, 40 of the top 50 automotive suppliers in North America. Suppliers to General Motors, Ford, FCA, Toyota, Honda, and Nissan. But the results have consequences in terms of tens of millions of dollars for OEMs - and in the quality, technology, and cost of the next vehicle you buy. There are a couple of ways to look at the results of the WRI. One is, "So what else is new?" And the other is, "Damn! How did that happen?" The study looks at five relationship areas — OEM Supplier Relationship; OEM Communication; OEM Help; OEM Hindrance; Supplier Profit Opportunity — within six purchasing areas — Body-in-White; Chassis; Electrical/Electronics; Exterior; Interior; Powertrain. In the overall rankings, Toyota is on top for the 15 th time in 17 years, with a score of 328. Honda, the only company to best Toyota (in 2009 and 2010), comes in second, at 319. Those two companies, explains John Henke, president of PPI, have collaborative working arrangements with colleagues and suppliers alike built into the very fabric of their cultures. This, however, is not a situation where one can readily conclude it is about "Japanese companies," because the third company with headquarters on the island of Honshu, Nissan, came in dead last. This is the "How did that happen?" portion. The Nissan score of 203 puts it 125 points behind Toyota. There hasn't been a number that low since the then-Chrysler Corp. scored 187 in 2010, when the company was clawing its way out of the recession. Clearly, the suppliers don't feel particularly engaged by the buyers at Nissan. Henke explains that whether a company does well or not on the WRI is rather simple. All people do things based on what they're measured on. "If you're measured on taking 10% out of your annual buy, you immediately know how to do it. But if you're also measured on improving relations, suddenly there is a new dynamic as to what you can do to achieve both.

Jeep still working to improve Cherokee's 9-speed auto

Fiat Chrysler is hoping an upcoming software update will stem the tide of consumer complaints surrounding its nine-speed automatic transmission. Owners of the 2014 Jeep Cherokee have reported a number of problems on the National Highway Traffic Safety Administration's SaferCar.gov website, since the new model and its troubled gearbox arrived way back in October 2013. The software update is "intended to keep the vehicle performing as intended, and to prevent durability issues from occurring in the future," an FCA spokesperson told Automotive News, and will be available to owners of both the 2014 to 2015 Jeep Cherokee and the 2015 Chrysler 200, which also uses the 9AT. While FCA will be notifying consumers of the update, owners can also request the software reflash if they happen into their dealer before then. Despite the widely documented problems with the transmission, the only complaints on NHTSA's website relate to the 2014 Cherokee – neither the 2015 Jeep nor the 200 have received any complaints. That bodes well as FCA prepares to begin deliveries of the 2015 Jeep Renegade and launch the Fiat 500X, both of which pair the 9AT with the 2.4-liter Tigershark four-cylinder. "We have had to do an inordinate amount of intervention on that transmission, surely beyond what any of us had forecast," FCA CEO Sergio Marchionne told Automotive News. "There are things that we have done – that we continue to do. Our proactive customer care intervention has actually increased in intensity on these vehicles in 2014, especially in the second half." What's fascinating about the 9AT's problems are that they haven't been the fault of manufacturer ZF, but have related to software that wasn't "mature" and had "teething problems," Marchionne has said previously, AN reports. With the lack of criticism for the 9AT in 2015 models and this pending software update, though, here's hoping that FCA has finally figured out its fuel-sipping gearbox. Related Video:

FCA seeks partner to keep building Dodge Dart, Chrysler 200

Mere weeks after FCA announced it was shutting down production of the Dodge Dart and Chrysler 200, new hope emerges to give the sedans a stay of execution. Speaking at the Geneva Motor Show last week, Sergio Marchionne said that the company was looking for a partner "who is better at it than we are and who has got capacity available" in order to continue building the models on its behalf. "There are discussions going on now," said Marchionne, according to Motor Trend. "I think we will find a solution. We continue to talk. It's both a technical solution and an economic one. We need to find a solution that works economically." Contracting vehicles to be manufactured offsite is more common practice among European automakers than it is with American ones. Chrysler's former patron Mercedes, for example, has the G-Class built for it by Magna Steyr in Austria, the A-Class by Valmet in Finland, and the R-Class by AM General in Indiana (even though it's no longer sold in the US). This arrangement would, on the surface at least, appear more similar to the deal that Toyota struck with Mazda to build the Scion iA, drawing on the contractor's expertise and capacity to build the small sedan on the client company's behalf. Only rather than basing a new model on one of the partner's existing ones, this deal would ostensibly continue building FCA models on FCA platforms using FCA components. We'll have to wait to find out with whom FCA strikes up the manufacturing deal, but we wouldn't be surprised to see Marchionne turn to a partner he already knows. The company is, after all, at the center of an intricate web of joint ventures and manufacturing contracts. The Fiat 124 Spider, for example, is built by Mazda. The Fiat Sedici that preceded the 500X was built by Suzuki. Models like the Dodge Stealth and Eagle Talon were built in Illinois at the Diamond-Star Motors joint venture before Mitsubishi took it over altogether. And Dodge continued selling the Mercedes-made Sprinter long after DaimlerChrysler split. The Ram ProMaster, though built by FCA in Mexico for the North American market, stems from a partnership in France with PSA Peugeot Citroen. And the ProMaster City is built in a joint-venture plant in Turkey, from which it's also sold by GM as an Opel in Europe and a Vauxhall in the UK. With all those deals coming and going, after all, what would one more add to the complexity?