12 Chrysler 300 Srt8 Heated Seats 6.4l Hemi Navigation Back Up Camera on 2040-cars

Auto blog

2015 Chrysler 200 gets 36 mpg with Tigershark four-cylinder

Chrysler has come out with the official fuel economy information on the new 200 following the info that was leaked from the EPA earlier this week. It turns out that our initial report of 18 miles per gallon in the city and 29 mpg on the highway for the all-wheel-drive V6 was correct.
What we didn't know at the time, though, was what sort of economy the 200's other powertrain options managed. Outfitted with the 2.4-liter four-pot, Chrysler is promising 23 mpg in the city and 36 mpg on the highway, with a combined rating of 28 mpg. Those figures are fairly impressive; besting figures of the 2.5-liter Ford Fusion and tying the 1.5-liter, EcoBoost, non-start-stop model. It's also beats the four-cylinder Toyota Camry's 35-mpg highway figure while tying its combined efficiency.
Stepping up to the 295-horsepower Pentastar V6 pushes the economy down to 19 mpg in the city, while the highway figure is a respectable 32 mpg for the front-driver. The combined rating for the FWD V6 is 23 mpg. Those figures can't quite match the 270-horsepower 2.0-liter, EcoBoost four of the Fusion, which nets 22 city and 33 highway. In fact, the V6 200 has trouble besting even the 3.5-liter V6 of the Camry, which returns 21 mpg city and 31 mpg highway. Again, though, the 200 is noticeably more powerful.

Almost 70 percent of FCA-PSA Groupe models to ride on two PSA platforms

With the merger between PSA Groupe and Fiat Chrysler having been officially announced this week, we still don't know where everything will settle once the process concludes. We covered the catalog of models herded by the combined company's 12 brands, all of which will remain for now. Profound changes must be afoot somewhere, though, else there'd be no reason for the tie-up. Automotive News has a report on one of the big moves, writing that "more than two-thirds of [PSA-FCA] production would be concentrated on just two platforms." Around 2.6 million cars built by the combined company would sit on PSA's Common Modular Platform, also known as the EMP1, for B-segment city cars, entry-level and mid-range C-segment sedans, and compact crossovers. Three million vehicles would ride on the EMP2 architecture intended for C- and D-segment cars and higher-end crossovers. Those figures account for around 5.6 of the 8.7 million vehicles the combined company expects to sell annually. AN didn't mention the Giorgio platform that's already spread throughout the FCA kingdom to support numerous current and future offerings like the next-gen Jeep Grand Cherokee, but did write that "larger Jeep models will continue to use FCA underpinnings." The body-on-frame chassis' under Ram trucks and the Jeep Wrangler and Gladiator should hold pat. We'll wait for word on the fate of the Compact U.S. Wide platform carrying the Chrysler Voyager and Pacifica and Jeep Cherokee. Dodge products with questionable futures are anyone's guess; we've heard the Dodge Durango, still built on a Mercedes-derived platform it shares with the current Grand Cherokee, could go body-on-frame for the next generation, or die and have the Giorgio-based, three-row Jeep Grand Cherokee take its place. More mystery comes with the long-lived LA and LD platforms in the big sedan and coupe trio Chrysler and Dodge still milk quite successfully. And if there were ever a time for the Dodge Journey – last reported as a Giorgio recipient – to modernize or die, we don't know when that time is. Although FCA platforms have been designed with alternative powertrains in mind, AN says the PSA Groupe architectures "are more modern than FCA's equivalent platforms." After PSA acquired GM's Opel/Vauxhall division, the French company didn't waste time moving the Anglo-German products to in-house platforms, helping to put the formerly money-losing operations into the black in just 18 months.

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.