2014 Chrysler 200 Touring on 2040-cars

Auto blog

SRT Viper plant idled over slow sales [UPDATE]

The SRT Viper is taking an extended production break later this spring while the factory copes with low demand and gears up for the 2015 model year. Chrysler will idle the Conner Avenue Assembly Plant from April 14 to June 23, and 91 employees there will be laid off during that time. Sales have been slow so far this year, with just 91 Vipers sold in the first two months of 2014 (591 were sold all last year), according to The Detroit News. According to Chrysler, this is all part of the plan for the Viper. The automaker says that the Connor Avenue factory was meant to fluctuate in this way because it only builds one vehicle, and the sports coupe was never meant to be a mass-production vehicle. The company claims that idling the plant will allow it to manage showroom inventories. "Customer and dealer demand for the SRT Viper continues at expected levels," said Chrysler spokesperson Dianna Gutierrez to The Detroit News. SRT hasn't revealed what changes are planned for the 2015 model. This isn't the first time we've heard of the Viper's weak demand. As of October 2013, SRT had hoped to build around 2,000 examples, but only about 1,000 had been made. At that point, officials then revealed production would likely be scaled back. We've contacted the Chrysler for further information, and we'll update this post if and when we hear back. UPDATE: Chrysler has passed along this official statement regarding the plant idling: Chrysler Group confirms that its Conner Avenue Assembly Plant will be down, beginning the week of April 14. Production will resume the week of June 23. Ninety-one UAW-represented employees will be laid off during this time. The SRT Viper is a hand-crafted American exotic car that is designed for a specific consumer that values performance, style and exclusivity. It has never been intended to be a mass-production vehicle as less than 29,000 vehicles have been produced in the past 20 years. The ability to increase and decrease production at the Conner Avenue Assembly Plant allows the company to continue to meet our customers' desire to keep these special cars exclusive. We will be able to take advantage of this transition to manage dealer inventories.

Almost 70 percent of FCA-PSA Groupe models to ride on two PSA platforms

With the merger between PSA Groupe and Fiat Chrysler having been officially announced this week, we still don't know where everything will settle once the process concludes. We covered the catalog of models herded by the combined company's 12 brands, all of which will remain for now. Profound changes must be afoot somewhere, though, else there'd be no reason for the tie-up. Automotive News has a report on one of the big moves, writing that "more than two-thirds of [PSA-FCA] production would be concentrated on just two platforms." Around 2.6 million cars built by the combined company would sit on PSA's Common Modular Platform, also known as the EMP1, for B-segment city cars, entry-level and mid-range C-segment sedans, and compact crossovers. Three million vehicles would ride on the EMP2 architecture intended for C- and D-segment cars and higher-end crossovers. Those figures account for around 5.6 of the 8.7 million vehicles the combined company expects to sell annually. AN didn't mention the Giorgio platform that's already spread throughout the FCA kingdom to support numerous current and future offerings like the next-gen Jeep Grand Cherokee, but did write that "larger Jeep models will continue to use FCA underpinnings." The body-on-frame chassis' under Ram trucks and the Jeep Wrangler and Gladiator should hold pat. We'll wait for word on the fate of the Compact U.S. Wide platform carrying the Chrysler Voyager and Pacifica and Jeep Cherokee. Dodge products with questionable futures are anyone's guess; we've heard the Dodge Durango, still built on a Mercedes-derived platform it shares with the current Grand Cherokee, could go body-on-frame for the next generation, or die and have the Giorgio-based, three-row Jeep Grand Cherokee take its place. More mystery comes with the long-lived LA and LD platforms in the big sedan and coupe trio Chrysler and Dodge still milk quite successfully. And if there were ever a time for the Dodge Journey – last reported as a Giorgio recipient – to modernize or die, we don't know when that time is. Although FCA platforms have been designed with alternative powertrains in mind, AN says the PSA Groupe architectures "are more modern than FCA's equivalent platforms." After PSA acquired GM's Opel/Vauxhall division, the French company didn't waste time moving the Anglo-German products to in-house platforms, helping to put the formerly money-losing operations into the black in just 18 months.

Wolverine will drive weird custom Chrysler 300 in next X-Men movie

Fiat Chrysler loves a movie tie-in. Remember the Stormtrooper-spec Dodge Charger we messed around with? Then there was the Jeep Renegade Dawn of Justice special edition, built for Batman v. Superman. And now, it looks like the company donated a misshapen Chrysler limo for the latest film in the Wolverine series. Some movie-stalking paparazzi caught Hugh Jackman next to this odd vehicle, and you can see photos at Just Jared, a celebrity gossip site. The photogs were more concerned with the graying star, who's reprising his role as the adamantium-boned superhero for the ninth time including cameos, but we'll focus on the machine. We can see the car's rear three-quarters and not a lot else. It looks broadly based on the 300, but much longer. The Chrysler winged badge is clearly visible on the trunk, while a retro script version of the automaker's logo sits on the rear pillar. There's also an unexplained "E8" badge to the right of the driver's side taillight. And as for those lamps, it's like FCA mashed together the current 300's taillights with those from a Cadillac CT6. The trunk and rear window are the strangest elements of all. We can't figure out what's happening with the tiny rear glass, the strange curve to it, or the tiny, sloping rear deck. It's ... not pretty. From the rest of what's visible, it's clear this particular car is a limo of some kind. The front end has been modified with fat fender flares sitting over some big multispoke wheels, and the door handles have been shaved. Behind the B-pillar, it gets weird. There's a long stretch of glass and bodywork, and then a very small rear door. Ingress and egress would be tough, to say the least. There's a lot of brightwork, too, from the wheels to the thick chrome strip running below the greenhouse and onto the hood. A couple of the images give a glimpse into the interior, which is wholly different from that in the production 300. We've embedded a tweet with some of the images below. But for the full gallery, you'll need to head over to Just Jared. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Related Video: News Source: JustJared.comImage Credit: Marvel Studios Auto News TV/Movies Chrysler Luxury Sedan