11 Traverse Ls 4x2, 3.6l V6, Auto, Cloth, Pwr Equip, Cruise,alloys,clean 1 Owner on 2040-cars

Auto blog

7 major automakers to build open EV charging network

A new joint venture established by BMW, GM, Honda, Hyundai, Kia, Mercedes-Benz and Stellantis will build a new North American electric vehicle charging network on a scale designed to compete with Tesla's industry-benchmark Supercharger network. The 30,000-plus planned new chargers will accommodate both Tesla's almost-standard North American Charging System (NACS) and existing automakers' Combined Charging System (CCS) options, effectively guaranteeing compatibility with the vast majority of current and upcoming electric models — whether they're from one of the involved automakers or not.  "With the generational investments in public charging being implemented on the Federal and State level, the joint venture will leverage public and private funds to accelerate the installation of high-powered charging for customers. The new charging stations will be accessible to all battery-powered electric vehicles from any automaker using Combined Charging System (CCS) or North American Charging Standard (NACS) and are expected to meet or exceed the spirit and requirements of the U.S. National Electric Vehicle Infrastructure (NEVI) program." Critically, the automakers involved will have a say in how the charging tech is implemented, guaranteeing that the hardware will play nicely with each automaker's in-house charging systems. Hyundai and Kia, for example, were hesitant to jump on board the Tesla NACS bandwagon earlier this year over concerns that the Supercharger network is insufficient for powering the two automakers' 800-volt charging systems; similar tech is used by Volkswagen and Porsche.  In addition to providing much-needed capacity and high-output charging for America's growing fleet of electric cars and trucks, the new network will integrate seamlessly with each automaker's in-app and in-vehicle features, rather than forcing customers to use third-party tools and payment systems, as is the case with some existing public charging infrastructure.  "The functions and services of the network will allow for seamless integration with participating automakersÂ’ in-vehicle and in-app experiences, including reservations, intelligent route planning and navigation, payment applications, transparent energy management and more. In addition, the network will leverage Plug & Charge technology to further enhance the customer experience," the announcement said.

2023 Chevrolet Silverado HD reportedly getting mammoth torque

Chevrolet just gave the light-duty Silverado a significant round of updates. It hasn't detailed the changes it has in store for the heavy-duty model yet, but a recent report claims the truck will arrive with significant engine upgrades. Without citing sources, website TFL Truck reported that the current pickup's 6.6-liter Duramax turbodiesel V8 will return in the updated model. Its displacement won't increase, but its output will reportedly grow to 505 horsepower and a mammoth 1,085 pound-feet of torque. To put those figures into perspective, the 6.6-liter makes 445 horsepower and 910 pound-feet of twist in the 2022 Silverado HD; GMC's Sierra HD is available with it as well. Bumping the Duramax's output is a way to keep up with the competition. Arch nemesis Ford offers buyers who have extremely heavy things to tow 475 horsepower and 1,050 pound-feet of torque from a 6.7-liter turbodiesel V8. Over at Ram, the most powerful engine available in a heavy-duty truck posts numbers of 420 and 1,075, respectively. If the report is accurate, Chevrolet will enviably take the horsepower and the torque crowns in the segment. What remains to be seen is what effect the increases will have on the Silverado's towing capacity. As of writing, it's capable of towing up to 36,000 pounds (approximately 15 times the weight of a 2021 Mazda MX-5 Miata). Moving out of the engine bay, the 2023 Silverado HD will receive an updated exterior design that will again help differentiate it from the smaller, light-duty model. We're expecting the next round of updates will also bring new tech features, and it's reasonable to assume that the trim structure will evolve; Chevrolet might notably shift the HD in a more outdoorsy direction to satisfy a growing demand for off-road-focused trucks in the United States. None of this is official; Chevrolet is keeping its lips sealed about the updated Silverado HD. Full details will likely emerge in the coming months, and sales are tentatively scheduled to start in time for the 2023 model year.

GM to sink over $900M into 4 plants, mostly for a new V8

FLINT, Mich. — General Motors says it will spend more than $900 million to update four factories, with the bulk going to an engine plant in Flint, Michigan, to build the next-generation V8 for big pickup trucks and SUVs. Factories in Rochester, New York; Defiance, Ohio; and Bay City, Michigan, also will see investments, some to make V8 engine components as well as parts for future electric vehicles, the company said Friday. The investments won't create any new jobs, but they will preserve about 2,400 hourly and salaried positions positions at the four sites, the company said. The investments “provide job security at these plants for years to come,” Gerald Johnson, GM's manufacturing chief, said in a statement. Much of the money, $579 million, will go to Flint Engine Operations for equipment to build the sixth-generation small-block V8 that will go into the next round of big pickup trucks and SUVs. The plant now employs about 700 people who also will keep making their current product, a diesel engine used in light trucks. GM, like other automakers, is facing stricter government fuel economy standards and pollution limits starting in the 2024 model year. New vehicles sold in the U.S. will have to average at least 40 miles per gallon of gasoline in 2026, up from about 28 mpg, under new Biden administration rules that undo a rollback of standards enacted under former President Donald Trump. That means the new V8 will have to get better mileage and pollute less than the current versions. Although GM wouldn't release details on the new engine, Johnson said during a news conference at the Flint plant that it would be more efficient than the current version. GM has a goal of selling only electric passenger vehicles by 2035, but Johnson said that's a dozen years out, a period when many customers will still want gas engines. “We know that has a horizon,” he said. “Between here and there, there are a lot of internal combustion customers that we don't want to lose,” he said. In addition to Flint, GM's engine components plant in Bay City, Michigan, will get $216 million to build camshafts and connecting rods, and to machine engine blocks and heads for the new V8 being built in Flint. The plant now employs about 425. The Defiance, Ohio, foundry will get $55 million to build a variety of block castings for the new V8. Included is $8 million for castings to support future electric vehicles, the company said. The plant has about 530 employees.