Chevrolet Tahoe Lt 4wd 4dr 1500 4x4 on 2040-cars

Auto blog

2021 Chevy Colorado and GMC Canyon facelift spied

The Chevy Colorado and its GMC Canyon twin have been on sale for a good long time now, and while things move a little more slowly on the truck side when it comes to facelifts and model changeovers, it seems like it’s about time. So itÂ’s no surprise to see some lightly camouflaged trucks running around ahead of what appears to be a minor refresh for the 2021 model year. Starting with the Colorado, it appears to have a bowtie hiding behind some camo in the center of the grille, which otherwise looks like the no-bowtie option you can get on 2019-and-up trucks. It could be that Chevy is keeping the no-bowtie grille design but allowing a bowtie to grace it, or it could be misdirection. Either way, the grille pattern adds a bit of flair to the otherwise staid front end design. There also appears to be a bit more shape to the lower air inlet, with echoes of some of the lower fascias of its bigger Silverado stablemate. The Canyon, on the other hand, shows more extensive front-end changes. At first glance, it looks to emulate some variants of the GMC Sierra, which would make sense given those modelsÂ’ changes for the 2020 model year. In particular, this Canyon has hints of Sierra HD, being more square and monolithic than the regular Sierra 1500s, although itÂ’s a little hard to tell with the camo covering the edges of the grille. It could certainly also adopt more rounded corners like the 1500s. Either way, itÂ’s more vertical and thereÂ’s less differentiation between the upper grille and lower opening. ThereÂ’s nothing in the way of changes around the sides or back, and while there may be some minor changes inside, we arenÂ’t expecting any. The word around town is that this isnÂ’t a full facelift, but rather a minor front end tweak thatÂ’ll just be a regular part of the model-year changeover. 

J.D. Power study identifies top seats for your tush

File under News your fanny can use: The seating systems in the Ford Escape and Edge, the Audi A3, Chevrolet Cruze, Kia Cadenza, Porsche Cayenne and Toyota Tundra received top marks in a new J.D. Power study on seating and seat belt quality and satisfaction. The J.D. Power 2017 Seat Quality and Satisfaction Study asked more than 77,000 new owners and lessees of 2017 model-year cars and light trucks to rate their vehicle's seats and seat belts within the first 90 days of taking ownership. The survey is broken up into seven vehicle segments and scored on total seat problems per 100 within each segment, with awards presented to the seating system supplier. Canadian auto supplier Magna won three of seven first-place awards for its seating systems in the A3, Escape and Edge. Ireland-based Adient got top marks for its seats in the Cadenza and Cayenne. Lear Corp. won for the Cruze, and Avanzar Interior Technologies scored highest for seats in the Tundra. J.D. Power says its study is intended for automakers and suppliers with quality and satisfaction information to be used in developing and marketing seating systems. "But the results are just as interesting to a consumer audience," the company says. "After all, some drivers spend a considerable amount of time behind the wheel, and it's helpful to know which vehicles offer the most comfortable seats for those long commutes." Ain't that the truth. Ford was the only automaker whose seat systems, both manufactured by Magna, received top honors in two segments: the Escape for mass-market compact SUV and the Edge for mass-market midsize/large SUV. J.D. Power says it used 22 attributes to measure seat quality, three measures of seat belt quality and 12 to measure satisfaction. Awards were presented to the seating suppliers. Related Video: Image Credit: Audi Auto News Design/Style Audi Chevrolet Ford Kia Porsche Toyota Safety JD Power seats

NHTSA approves hybrid rearview mirror display in Cadillac CT6, Bolt EV

The Chevy Bolt EV prototype doesn't just have a fancy new all-electric powertrain. Just outside the driver's line of sight is a newfangled rearview mirror, one that can turn into a screen that shows a moving image from the rear-facing camera. Speaking to NPR's Robert Siegel yesterday, Department of Transportation secretary Anthony Foxx said that NHTSA has now approved this type of mirror/screen for use in vehicles. According to a letter from NHTSA to General Motors, GM will likely use this Full Display Mirror first in the 2016 Cadillac CT6 before coming to the Bolt. In its letter to GM, NHTSA said that the Full Display Mirror will only qualify as a standard rearview mirror as long as there are normal side mirrors in place. In other words, don't expect to see cameras and screens replacing all the mirrors in a motor vehicle just yet. @AutoblogGreen @NPR - #NHTSA has OK'd GM rear-view system that can switch between mirror & camera views. pic.twitter.com/6CBeIit10v — Anthony Foxx (@SecretaryFoxx) February 22, 2016 The Full Display Mirror was developed by Gentex, which has long worked with GM. The FDM debuted in 2014 and some people hoped it would also make its way into the Tesla Model X. Gentex, which also makes auto-dimming mirrors, says that it has "set out to develop the technologies and core competencies necessary to manage this evolution of the rearview mirror." The Chevy Bolt EV will start at $37,500, before incentives. The 200-mile EV will go into production late this year for likely sale in early 2017. Related Video: