Auto blog

Chevy Volt replacement battery cost varies wildly, up to $34,000

There's a growing hubbub in the plug-in vehicle community over what looks like some ridiculously cheap replacement batteries for the Chevrolet Volt going up for sale. GM Parts Online, for example, is selling a replacement Volt battery with an MSRP of $2,994.64 but, with an online discount, the price comes down to $2,305.88. For the 16-kWh pack in the 2012 Volt, that comes to a very low $144.11 per kilowatt hour (kWH). But is it a real deal? How can it be, when a Chevy dealer may quote you a price of up to $34,000 to replace the pack? For a 16-kWh Volt pack, $2,305.88 comes to a very low $144.11 per kWh. But is it a real deal? Battery packs in alternative propulsion vehicles are usually priced by the kWh and, historically, they've been thought to be in the range of $500-per-kWh for OEM offerings. Since automakers are understandably secretive about their costs, we still don't know what the real number is today, but we do know it varies by automaker. Tesla, for example, has said it pays less than $200-per-kWH at the cell level but, of course, a constructed pack would be more. Whatever is going on, li-ion battery prices are trending downward. So, $144.11 certainly sounds great, but what's the story here? Kevin Kelly, manager of electrification technology communications for General Motors, reminded AutoblogGreen that GM Parts Online is not the official GM parts website and that, "the costs indicated on the site are not what we would charge our dealers or owners for a replacement battery. There would be no cost to the Volt owner if their battery needs replacement or repair while the battery is under the eight year/100,000 mile limited warranty coverage provided by Chevrolet." A single price tag also can't be accurate for everyone, Kelly said. "If the customer needs to have their battery repaired beyond the warranty, the cost to them would vary depending on what needs to be replaced or repaired (i.e. number of modules, which specific internal components need replacement, etc.)." he said. "So, it's hard for us to tell you exactly what the cost would be to the customer because it varies depending on what might need to be repaired/replaced. As a result, the core charge would vary." But, is the $2,300 price even accurate for anyone? Thanks to a reader comment, we see that this similar item on New GM Parts makes it look like the lithium-ion modules that Kelly mentioned – where a lot of the expensive bits are – are not included.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Next-gen GMC Sierra spied with diesel power

The next generation of GM trucks is arriving soon, and we're expecting a huge leap forward over the current lineup. The Chevy Silverado and the GMC SIerra sell extremely well, but haven't done much to move the segment forward in a long time. The Ford F-150 has an all-aluminum body and turbocharged V6 power. The Ram 1500 gained a diesel and coil spring suspension. These spy shots show that diesel may be in the cards for GM. Some quick shots and copious use of flash show what is most likely a tank for diesel exhaust fluid and a diesel particulate filter, both necessary equipment for any modern diesel. It's unclear what form factor that engine will come in, though GM has a number of engines to choose from, including the 2.8-liter inline four that's found in the Colorado and Canyon, though that may be a little light duty for the Silverado and Sierra. Other rumors surrounding the trucks suggest a move to an aluminum cab while retaining a steel bed. That seems like a reasonable move for GM, even if the company was attempting to shame Ford for its move to aluminum a few years ago. Look for more news as early as the Detroit Auto Show in January. Related Video: Featured Gallery 2019 GMC Sierra spy shots View 21 Photos Image Credit: Spied Bilde Spy Photos Chevrolet GMC Truck