Lt Diesel 6.6l K3500 4wd Crew Cab One Owner Camper 5th Wheel on 2040-cars

Auto blog

GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch

According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

Recharge Wrap-up: Panasonic, Tesla on Gigafactory deal?

Bentley has been awarded the Carbon Trust Standard for reductions of carbon, water use and waste production in manufacturing. The Carbon Trust is an organization that helps groups such as businesses and governments reduce carbon emissions, use of energy and resources, and waste output. From 2011 to 2013, Bentley reduced CO2 emissions by 16 percent per car manufactured, curtailed water use by 35.7 percent, and saw significant waste reductions. Darran Messem of Carbon trust says, "Bentley is clearly passionate about continuing to improve its environmental performance, which is reflected by the fact the company has consistently invested in new technology." Read more in the press release below. Chevrolet is giving 12 Volts to MBAs Across America. The organization will use the range-extended electric cars in its efforts to help MBA students learn from and work with small business owners. As part of the MBAs Across America program's first year, four students drove 8,000 miles to provide entrepreneurs with free business counseling. The program has expanded, and this year, teams of MBAs will use the Volts to travel to 25 cities to offer their services. Learn more about the partnership between Chevrolet and MBAs Across America in the press release below. A professor from the University of Michigan has found fuel cycle analysis to be too flawed to be relied upon for measuring CO2 impacts of transportation fuels. Professor John DeCicco of the university's Energy Institute feels that the flaws in calculating the carbon footprint of liquid fuel production and combustion make such lifecycle analysis impractical. He suggests, instead, to focus to carbon capture. Since capturing CO2 directly from a vehicle is probably never going to happen, DiCicco believes the solution is to capture carbon from the atmosphere in sectors outside of transportation. Says DiCicco, "Research should be ramped up on options for increasing the rate at which CO2 is removed from the atmosphere and on programs to manage and utilize carbon fixed in the biosphere, which offers the best CO2 removal mechanism now at hand. Such strategies can complement measures that control the demand for liquid fuels by reducing travel activity, improving vehicle efficiency and shifting to non-carbon fuels." Read more at Green Car Congress. Global transportation energy consumption is expected to increase by 25.4 percent by 2035, according to a report by Navigant Research.