2013 Chevrolet Silverado 3500 Lt on 2040-cars

Auto blog

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

Opel pulls out of Russia, GM to focus on Cadillac, 'iconic' Chevys

General Motors is going to realign its priorities in the struggling Russian marketplace, withdrawing its Opel brand and pulling out mainstream Chevrolet models. Instead, the General will take aim at Russia's well-established oligarchy, pushing Cadillac as well as "iconic" Chevrolet models, like the Corvette, Camaro and Tahoe. "This change in our business model in Russia is part of our global strategy to ensure long-term sustainability in markets where we operate," GM president Dan Ammann said in a statement. "This decision avoids significant investment into a market that has very challenging long-term prospects." Russian customers interested in an Opel or mainstream Chevys like the Spark, Aveo (the US market Sonic), Cobalt (shown above), Cruze, Orlando and the like have until December to snap up a car before the brands are pulled. "We do not have the appropriate localization level for important vehicles built in Russia and the market environment does not justify a major investment to further localize." Opel Group CEO Karl-Thomas Neumann said. GM will continue to offer service to customers in Russia. "We can assure our customers that we will continue to provide warranty, parts and services for their Chevrolet and Opel vehicles," Neumann said. Beyond realigning its brands in Russia, GM also announced that it would also be idling the company's factory in the country's second-largest city, St. Petersburg. This is the second time the St. Petersburg factory has been in the news – GM announced that it'd be idled for roughly two months back in February. Scroll down for the official press release from GM. GM to Change Business Model in Russia 2015-03-18 Focus on Cadillac and iconic Chevrolet vehicles Wind down Opel brand and sale of mainstream Chevrolet cars Idle GM Auto manufacturing facility in St. Petersburg Part of GM's strategy to ensure long-term sustainability in global markets DETROIT – General Motors today announced plans to change its business model in Russia. GM will focus on the premium segment of the Russian market with Cadillac and U.S.-built iconic Chevrolet products such as the Corvette, Camaro and Tahoe. The Chevrolet brand will minimize its presence in Russia and the Opel brand will leave the market by December 2015. "This change in our business model in Russia is part of our global strategy to ensure long-term sustainability in markets where we operate," said GM President Dan Ammann.

Chevy's low-cost pedestrian avoidance to debut on 2016 Malibu

The mainstreaming of safety technologies that began on luxury vehicles will get a big boost from General Motors later this year. The General says it plans to offer 22 driver assistance systems across its product portfolio of 2016 models, starting with the redesigned Chevrolet Malibu - the one that we know will keep tabs on teenagers for the benefit of parents. Pedestrian avoidance will be another of its available options. Instead of kitting the sedan out with numerous and expensive radar arrays, the GM system uses the camera mounted next to the rearview mirror that is already used for the lane-keeping function. New software lets it detect pedestrians, and when it detects a potential collision with one, it can alert the driver and brake autonomously if the driver doesn't react. Eventually, engineers want to give it the ability to do the same with cyclists. Because it uses existing hardware updated with new code, GM says the application costs "a few hundred dollars." GM demonstrated the Front Pedestrian Braking preventing a crash with a dummy pedestrian at speeds up to 15 miles per hour. Automotive News reports that it will reduce the severity of impact up to 40 miles per hour, but "may not be of much use in collisions at higher speeds." That feature will also join the options list of the Cadillac CT6. The press release below has more on GM's driver tech soon on the way. Related Video: GM Paving Way to Smarter and Safer Driving at All-New Active Safety Test Area 22 crash-avoidance technologies offered on 2016 Chevrolet, Buick, GMC and Cadillac models MILFORD, Mich. 2015-07-24 – Chevrolet, Buick, GMC and Cadillac will offer 22 different active safety technologies across their 2016 model year U.S. lineups, ranging from driver alerts to those that automatically intervene and assist the driver in critical situations. Safety engineers will develop and test these and other safety technologies for products around the world at GM's new, 52-acre Active Safety Test Area at its Milford Proving Ground near Detroit. The $14 million facility officially opened Friday. "Our comprehensive safety strategy of helping customers before, during and after a crash continues," said Jeff Boyer, vice president of GM Global Vehicle Safety.