2006 Chevy Silverado 3500 Fully Loaded on 2040-cars

Auto blog

2016 Chevrolet Camaro: Notes from the reveal

The 2016 Chevrolet Camaro debuted Saturday evening in Detroit at an enthusiast-oriented event near the city's IndyCar course. While the big news was the Camaro's 200-pound weight loss, tighter chassis, and a snorting new V8, plenty of other morsels of Camaro info came out. Here's some of the more interesting stuff we heard. • The 2.0-liter inline four-cylinder is the first turbocharged engine in a Camaro. • The LT1 borrowed from the Corvette Stingray marks the third time a Camaro has used an engine with that badge. It was previously used in 1970-72 (Z/28), 1993-97 (Z/28), and 1996-97 (SS). • The Camaro was revealed in a tent before nearly 1,000 enthusiasts, General Motors executives (including CEO Mary Barra) and mere feet from the Grand Prix course where IndyCars will run in two weeks. • Chevy hopes to continue to attract new customers with the Camaro and said 63 percent of the fifth-generation buyers were new to the brand. • GM product boss Mark Reuss neatly summed up the Camaro's handling character. "It's wicked fast and extremely nimble." • Reuss on the design goal: make it "look like a car for tomorrow instead of a car from yesterday." • Reuss' first car was a 1967 Camaro, and he's reiterated his passion for the car. "People want to be seen in a Camaro, and that never goes away." • Chevy North America president Alan Batey said he plans to line up a red Camaro as soon as the order bank opens. We assume he'll have early access to that. • Though the appearance is similar, the sixth generation of the Camaro appears a little sleeker and is more aerodynamic thanks to 350 hours in the wind tunnel. Only two parts, the SS badge and the rear bow-tie emblem, are carryover. • Al Oppenheiser, the Camaro's chief engineer, said most of the options (except Magnetic Ride Control, which is SS exclusive), will be offered on the inline four. The engine will be capable of propelling the Camaro to a sprint to 60 miles per hour in well under six seconds. "We don't want to ... make it feel like an excuse car," he said. • Without revealing specifics, Oppenheiser said every Camaro variant will be faster than the model it replaces. •The interior is vastly improved. We got an up-close look in the cabin of one of the cars revealed with a red and white layout, and the materials are much better. The setting is more colorful, and 24 different ambient lighting shades are available. Related Video:

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

Chevy Colorado gets box delete option designed for upfitters

The Colorado, which marks the return of Chevrolet to the midsize truck segment, is receiving critical praise, and now it's time for the pickup to get to work. At the National Truck Equipment Association Work Truck Show in Indianapolis, IN, Chevy is unveiling a box delete option package for the model that allows businesses to custom tailor the Colorado to their needs. The choice to remove the bed is exclusively available on the Colorado Work Truck trim in the rear-wheel drive, extended cab model with a 305-horsepower, 3.6-liter V6 and six-speed automatic gearbox, and Chevy claims this is the only option of its type in the segment. Beyond the obvious loss of the rear, these trucks feature eight mounting points on the frame for upfitters to install any necessary modifications. They also get the Z82 trailering package and a locking differential. The versions with the box delete package carry a payload rating of 2,200 pounds an a gross vehicle weight rating of 6,001 pounds. "It's ideal for utility companies requiring service bodies, as well as landscapers and other businesses needing the utility of a flatbed," Ed Peper, US Vice President for General Motors Fleet and Commerical, said in the option's announcement. Further options with the package are limited to choosing a repositioned fuel filler for the upfitter to install and deleting the rear seat for extra interior capacity. The box delete becomes available in mid-April, and buyers get a $300 credit off the price of the Colorado when it's selected. Colorado 'Box Delete' Expands Options for Businesses Chevrolet package offers unique midsize pickup platform for alternative uses 2015-03-04 INDIANAPOLIS – With a box delete option, business owners and fleet managers can have it their way when it comes to customizing the back end of the 2015 Chevrolet Colorado. Chevrolet today announced availability of the package in mid-April. It is on display this week at the annual National Truck Equipment Association Work Truck Show in Indianapolis. It is the only such option offered in the midsize truck segment. "With the segment-leading efficiency and maneuverable size, the Colorado makes a great, flexible choice for urban businesses and fleets to make the most of a midsize truck," said Ed Peper, U.S. vice president, GM Fleet & Commercial.