2015 Chevrolet Silverado 2500 Lt on 2040-cars

Auto blog

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video:

GM recalling 521,817 cars in two campaigns

General Motors is issuing two, separate recalls covering a total of 521,817 vehicles worldwide. The larger campaign covers 468,887 units of the 2011-2012 Chevrolet Malibu. Specifically, 437,045 of these are in the US, and the rest are outside the country. In these sedans, a steel cable that connects the seat belt to the vehicle can fatigue and separate. GM knows of 36 claims about the problem but only one minor injury. According to The Detroit News, this happened when a taxi driver hit his head. To fix things, dealers will replace the "outboard lap mounting bracket," which will move the tensioner rearward. They'll also inspect and if necessary replace the steel cable and lap pretensioner. In the second campaign, 52,930 examples the 2015 Chevy Colorado and 2015 GMC Canyon have seat frame attachment hooks that were installed incorrectly during assembly. GM hasn't received any reports of crashes, injuries, or fatalities about this problem. Dealers will inspect the affected trucks and repair as necessary. GM spokesperson Alan Adler told Autoblog that he didn't yet have a specific date when affected owners would receive official mailings about either of these recalls. GM Statement General Motors is recalling 48,309 2015 model year Chevrolet Colorado and GMC Canyon midsize pickup trucks in the U.S. because certain seat frame attachment hooks were not properly attached to the vehicle body during assembly. Dealers will inspect the potentially affected seats for proper installation and repair if necessary. GM knows of no crashes, injuries or fatalities related to this condition. The total vehicle population of the recall is 52,930 including 4,620 vehicles sold in Canada. General Motors is recalling 437,045, 2011-2012 model year Chevrolet Malibus in the U.S. because the flexible steel cable that connects the safety belt to the vehicle can fatigue and separate over time as a result of occupant movement in the seat. Dealers will replace the outboard lap mounting bracket to relocate the tensioner slightly rearward. Dealers will inspect the cable and, if necessary, replace the lap pretensioner. GM knows of 36 claims, no crashes or fatalities and one minor injury reportedly related to the condition. The total vehicle population of the recall is 468,887 including Canada, Mexico and exports.

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.