2011 Chevrolet Silverado 2500 Hd Lt Extended Cab Pickup 4-door 6.0l on 2040-cars

Auto blog

Junkyard Gem: 1986 Chevrolet Sprint Plus

General Motors sold second- and third-generation Suzuki Cultuses with Geo or Chevrolet Metro badging in the United States from 1989 through 2001 model years, and we've all seen plenty of those cars on the street over the years. The first-generation Cultus was sold here as well, with Chevrolet Sprint badges, and I've found a rare example of the Sprint five-door hatchback in a Northern California car graveyard. The Chevy Sprint first appeared on the West Coast as a 1985 model, then became available everywhere in the United States for the 1986 through 1988 model years (in Canada, it was sold as the Pontiac Firefly). It was available here as a hatchback with three or five doors; for 1986 only, the five-door was badged as the Sprint Plus. Soon enough, The General would be selling many more Asian-built cars with Detroit badges here. Isuzu I-Marks were sold as Chevrolet/Geo Spectrums starting in the 1986 model year, while Daewoo provided the Pontiac LeMans two years later. Under the hood, a 1.0-liter three-cylinder rated at 48 horsepower. The five-door Sprint cost $5,580 in 1986, which was $200 more than the three-door (those prices would be $15,445 and $14,891 in 2023 dollars). I've documented seven discarded Sprints prior to this one (including an extremely rare Turbo Sprint), and all of them were three-doors; we can assume that price was the most important factor for Sprint buyers. Gasoline prices were crashing hard during the middle 1980s, but memories of gas lines and odd-even-day fuel rationing from 1979 remained strong. What cars competed with the '86 Sprint on sticker price? Well, there was no way to undercut the hilariously affordable (and terrible) Yugo GV, which cost $3,990. The much bigger (but still pretty bad) Hyundai Excel listed at $4,995, while Toyota would sell you a sturdy (but zero-fun) Tercel starting at $5,448. Even the wretched Chevy Chevette — yes, it was still available in 1986 — cost $5,645. The original buyer of this car was willing to shell out an extra $395 to get an automatic instead of the base five-speed manual. That's about $1,093 in today's money. This car must have been slow. By the end, the doors were held shut with duct tape, but it still stayed alive until age 37. 53 miles per gallon on the highway! It does everything. The camels of the highway.

Is this '47 Chevrolet a rat rod or a sports car?

These days there are plenty of vehicles that blur the conventional automotive class structures. For instance, was the Honda Crosstour a wagon or an SUV? And what exactly was the Nissan Murano CrossCabriolet? Regardless, those line-blurring cars (or trucks) are out there, and though this one didn't roll off a production line, it's still quite the automotive head-scratcher. Hailing from Missouri, this epic creation is one part mad science experiment, one part 1947 Chevrolet pickup, and one part '95 Mercury Cougar. Add it all up and you get an awesome truck-sports-car hybrid, complete with an outrageous wing and a V8 to boot. And interestingly enough, it's up for sale . RELATED: Check out this Wild-Styled Lamborghini Rat Rod So how does it all come together? According to the listing, the Chevrolet truck cab (which had previously been chopped) was sanded down to bare metal and given a thorough shellacking of clear coat. It was then melded together with the front end of a 1995 Chevrolet S10 pickup truck, and set low to the ground on Bilstein suspension drop spindles. Stance achieved. But instead of fielding an engine from either of those pickups, it pulls its heart from a 2005 Chevrolet Tahoe SUV—a big 5.3-liter V8 heart, that is. It comes backed-up to a GM Turbo 400 automatic transmission. Towards the rear however is where things get really interesting. A Copper Pearl coated tube frame chassis both attaches the rear independent suspension (a la Mercury Cougar) to the racy spoiler, as well as secures the rat rod's rear-mounted radiator, fan, and fuel tank. I'm not quite sure why, but it just looks glorious. RELATED: Reports Say Mid-Engine Corvette Will Arrive in 2018 Inside the vintage cab, the Chevrolet furthers its racing proclivities (it's said to have won burnout and auto-cross events) with a pair of harnessed racing seats, a drift brake, a detachable steering wheel, and a tachometer with oil and temperature gauges, but oddly no speedometer. The shifter is a crescent wrench. And its shift boot? That's a Crown Royal Purple bag. All in all, this grin-worthy Frankenstein creation tallies up bits and pieces from four different vehicles (five if you include the Camaro wheels), which make it truly a mash-up of epic proportions. Internet, what do you think? Related Video: This article by Zach Doell originally appeared on Boldride. Design/Style Chevrolet Mercury Auctions Coupe Special and Limited Editions Classics eBay rat rod

GM struggles to sell small cars, plans to lay off 2,084 employees at two plants

Due to low demand for some of its vehicles, General Motors plans to cut 2,084 jobs at its assembly plants in Lordstown, OH and Lansing, MI. At the same time, the automaker also announced plans to invest approximately $900 million in three of its facilities – the Toledo Transmission Operations in Ohio, Bedford Casting Operations in Indiana, and Lansing Grand River in Michigan - for future products. GM will discontinue the third shift at both the Lansing Grand River plant and the Lordstown, OH plant. The Cadillac ATS, Cadillac CTS, and Chevrolet Camaro are made at the automaker's plant in Michigan, which currently has 2,700 employees. The move to eliminate the third shift affects 810 hourly workers, as well as 29 salaried employees, starting on January 16th. The plant in Lordstown, OH currently has 4,500 employees and makes the Chevrolet Cruze sedan. The plan to discontinue the third shift will affect 43 salaried workers and 1,202 hourly employees and will start on January 23rd. As Fortune points out, sales of the Cruze are down 20 percent through October, while sales of the Cadillac ATS and CTS were down 17 percent through the same period of time. In addition to cutting the third shift at both assembly plants, the automaker plans to invest a total of $900 million between three of its facilities for unnamed future products. GM's Toledo Transmission Operations will receive $667.6 million, the Lansing Grand River Assembly plant will receive $211 million, and the automaker's Bedford Casting Operations will get $37 million. Last year, GM cut roughly 500 jobs from its Orion Township factory due to slow sales of the Chevrolet Sonic and Buick Verano, with surging crossover and SUV sales as the most likely culprit. With GM posting much healthier sales figures for the Chevrolet Equinox and Cadillac XT5 compared to the ATS, CTS, and Cruze, it looks like compact SUVs are to blame for this year's layoffs as well. Related Video: News Source: Fortune, General MotorsImage Credit: REUTERS / Rebecca Cook Hirings/Firings/Layoffs Plants/Manufacturing Cadillac Chevrolet GM Coupe Sedan Lordstown Ohio