2006 Chevrolet Silverado 2500 Hd Ls Extended Cab Pickup 4-door 6.6l on 2040-cars

Auto blog

Race Recap: Rolex 24 at Daytona was fast and feisty

Let the record show that victory at the 2015 Rolex 24 at Daytona went to the No. 02 Chip Ganassi Racing with Felix Sabates Target/Ford EcoBoost Riley DP driven by Verizon IndyCar drivers Scott Dixon and Tony Kanaan and NASCAR drivers Jamie McMurray and Kyle Larson. The winner did 740 laps to cover 2,634.3 miles in 24 hours and 57.667 seconds. That's a statement to this year's pace in spite of 18 cautions, two more than last year: the Michael Shank Racing Ligier got pole with a time of 1:39.194, slower than last year's pole time of 1:38.270; however, the winning car last year only did 695 laps. The fight for top honors was shaved to a four-car battle over the first third of the event. The No. 02 Ganassi car took the lead on the first lap, swapping it well into the night with the No. 01 Ganassi car, the No. 10 Wayne Taylor Racing Corvette DP, and the defending champion No. 5 Action Express Corvette DP, all of them staying within about 20 seconds of one another. The Action Express car had a fuel connector come loose and lost three laps getting towed back to the pits to have it reattached, but was back in the lead 18 hours in. The No. 01 Ganassi car dropped out with recurring clutch problems 22 hours in, retiring not long after. A race-within-the-race is where the concluding action happened, a seven minute, 30-second dash from the end of the last caution to the checkered flag. During the penultimate pit stops with an hour to go, Dixon was in second place followed Jordan Taylor in the Wayne Taylor Racing DP into the pits but beat him out, taking the lead. The Action Express car was in third. In the last pit stops of the race, Dixon gained even more time, getting a four-second advantage over Taylor. Then a full-course caution came out twenty minutes before the finish when a Prototype Challenge car hit the wall and caught fire, bunching up the field. That closed the pits, but the Wayne Taylor Racing car had to pit during that yellow because of a miscalculation of driver time. No driver can be behind the wheel for more than four hours in a six-hour period but Jordan Taylor was going to go over, so he came in to swap out for brother Ricky. That cost the team any chance of second place, since they took an additional drive-through penalty for entering closed pits. When the track went green again, Sebastien Bourdais in the Action Express car stayed all over Dixon for the final five laps but couldn't get around him.

IIHS gives good ratings to 4 of 8 midsize pickups in crash test

Versions of the Toyota Tacoma, Chevrolet Colorado and GMC Canyon Crew Cab earned top ratings in a new crash test of midsize pickup trucks from the Insurance Institute for Highway Safety, while two versions of the Nissan Frontier earned marginal ratings. But the organization gave poor marks to all eight pickups tested for their dim headlights. Overall, four of the eight pickups evaluated earned good ratings for protecting occupants in all five crash test categories — the Tacoma double cab along with crew cab versions of the Colorado, Canyon and Tacoma. But the poor headlights and lack of an automatic emergency braking system blocked any of the pickups from qualifying for the IIHS's Top Safety Pick awards. The study looked at two pickup body styles using 2017 models: crew cabs, which have four full doors and two full rows of seating, and extended cabs, which have two full front doors, two smaller rear doors and compact second-row seats. It subjected each to five tests, and it evaluated the performance of front crash prevention systems and headlights. The Toyota Tacoma crew cab was the only pickup in that class that earned a good rating for structure in the small overlap test, which replicates what happens when a vehicle clips a tree, pole or another vehicle that has crossed the center line. The model's Access Cab extended-cab version was rated similarly, though its structure was rated acceptable. "This group of small pickups performed better in the small overlap front test than many of their larger pickup cousins," says David Zuby, the Institute's executive vice president and chief research officer. "The exception was the Nissan Frontier, which hasn't had a structural redesign since the 2005 model year." The extended-cab versions of the Chevy Colorado and GMC Canyon earned acceptable ratings, while both the Nissan Frontier king-cab and crew-cab models were rated marginal. Toyota says its 2018 Tacoma will feature upgraded headlights and a standard autobraking system that can detect pedestrians. "Headlights are basic but vital safety equipment. Drivers shouldn't have to give up the ability to see the road at night when they choose a small pickup," Zuby said. Related Video: Auto News Chevrolet GMC Nissan Toyota Safety Truck Videos gmc canyon nissan frontier chevrolet colorado

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck