2001 Chevrolet Silverado 2500 on 2040-cars

Auto blog

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Dodge Challenger SRT Hellcat vs. Chevrolet Camaro ZL1 in latest Head 2 Head

"Olympian" is one of the terms we use to signify the greatest height, the seat of the gods. Yet Mt. Olympus is the second-highest peak in the Balkans ranges, overshadowed by the crest at Musala in Bulgaria's Rila mountains. Both great heights, but one is a little higher. That's how we get the Olympian Chevy Camaro ZL1 pitched at the Musalic Dodge Challenger SRT Hellcat in Motor Trend's latest episode of Head 2 Head. The side-by-side spec sheet is filled with farcical numbers. For the ZL1, that's a 6.2-liter V8 with 580 horsepower, 556 pound-feet of torque, a 4,051-pound curb weight, 0-to-60 miles per hour in 3.9 seconds, a quarter-mile time of 12.2 seconds and a base price of just $57,800. Opposing that, the Hellcat wrings out its 6.2-liter V8 for 707 hp, 650 lb-ft of torque, weighs 4,449 pounds, does the quarter in 11.7 seconds and has a base price of just $60,990. Except in the case of the Hellcat, when Motor Trend put it on the dyno the machine spit out a reading of 672 hp and 606 lb-ft at the wheels. If there's a 10-percent driveline loss through those beefed-up internals and heavy-duty eight-speed transmission, that means the Hellcat is actually rated at about 750 horsepower and 700 lb-ft. But once they get put on a closed-off strip of coast road in Northern California, there are only a few strands of hair between their respective performances. That's not the case for they sensations provide; host Jonny Lieberman calls one of them, "One of the most incredible cars ever made," and says, "It changes everything." Watch the video above to see who got the verdict and how. Related Video: