08 Black Cloth 4x4 New Tires Carfax 1 Owner Grille Guard Net Direct Auto Texas on 2040-cars

Auto blog

NHTSA approves hybrid rearview mirror display in Cadillac CT6, Bolt EV

The Chevy Bolt EV prototype doesn't just have a fancy new all-electric powertrain. Just outside the driver's line of sight is a newfangled rearview mirror, one that can turn into a screen that shows a moving image from the rear-facing camera. Speaking to NPR's Robert Siegel yesterday, Department of Transportation secretary Anthony Foxx said that NHTSA has now approved this type of mirror/screen for use in vehicles. According to a letter from NHTSA to General Motors, GM will likely use this Full Display Mirror first in the 2016 Cadillac CT6 before coming to the Bolt. In its letter to GM, NHTSA said that the Full Display Mirror will only qualify as a standard rearview mirror as long as there are normal side mirrors in place. In other words, don't expect to see cameras and screens replacing all the mirrors in a motor vehicle just yet. @AutoblogGreen @NPR - #NHTSA has OK'd GM rear-view system that can switch between mirror & camera views. pic.twitter.com/6CBeIit10v — Anthony Foxx (@SecretaryFoxx) February 22, 2016 The Full Display Mirror was developed by Gentex, which has long worked with GM. The FDM debuted in 2014 and some people hoped it would also make its way into the Tesla Model X. Gentex, which also makes auto-dimming mirrors, says that it has "set out to develop the technologies and core competencies necessary to manage this evolution of the rearview mirror." The Chevy Bolt EV will start at $37,500, before incentives. The 200-mile EV will go into production late this year for likely sale in early 2017. Related Video:

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

Impala SS vs. Marauder: Recalling Detroit’s muscle sedans 

Impala SS vs. Marauder — it was comparo that only really happened in theory. ChevyÂ’s muscle sedan ran from 1994-96, while MercuryÂ’s answer arrived in 2003 and only lasted until 2004. TheyÂ’re linked inextricably, as there were few options for powerful American sedans during that milquetoast period for enthusiasts. The debate was reignited recently among Autoblog editors when a pristine 1996 Chevy Impala SS with just 2,173 miles on the odometer hit the market on Bring a Trailer. Most of the staff favored the Impala for its sinister looks and said that it lived up to its billing as a legit muscle car. Nearly two-thirds of you agree. We ran an unscientific Twitter poll that generated 851 votes, 63.9 percent of which backed the Impala. Muscle sedans, take your pick: — Greg Migliore (@GregMigliore) April 14, 2020 Then and now enthusiasts felt the Impala was a more complete execution with guts. The Marauder, despite coming along later, felt more hacked together, according to prevailing sentiments. Why? On purpose and on paper theyÂ’re similar. The ImpalaÂ’s 5.7-liter LT1 V8 making 260 horsepower and 330 pound-feet of torque was impressive for a two-ton sedan in the mid-Â’90s. The Marauder was actually more powerful — its 4.6-liter V8 was rated at 302 hp and 318 lb-ft. The ImpalaÂ’s engine was also used in the C4 Corvette. The MarauderÂ’s mill was shared with the Mustang Mach 1. You can see why they resonated so deeply with Boomers longing for a bygone era and also captured the attention of coming-of-age Gen Xers. Car and DriverÂ’s staff gave the Marauder a lukewarm review back in ‘03, citing its solid handling and features, yet knocking the sedan for being slow off the line. In a Hemmings article appropriately called “Autopsy” from 2004, the ImpalaÂ’s stronger low-end torque and smooth shifting transmission earned praise, separating it from the more sluggish Mercury. All of this was captured in the carsÂ’ acceleration times, highlighting metrically the differences in their character. The Impala hit 60 miles per hour in 6.5 seconds, while the Marauder was a half-second slower, according to C/D testing. Other sites have them closer together, which reinforces the premise it really was the little things that separated these muscle cars. Both made the most of their genetics, riding on ancient platforms (FordÂ’s Panther and General MotorsÂ’ B-body) that preceded these cars by decades. Both had iconic names.