06 K2500hd Lt3 (lbz) Duramax 6spd Allison 4wd (new Tires) 1-owner Carfax Tx !!!! on 2040-cars

Auto blog

GM trucks get hybrid versions, but you'll probably never see one

A few years ago, General Motors sold hybrid versions of its Chevy Silverado and GMC Sierra pickups. They weren't very good, using GM's old two-mode hybrid system that resulted in only negligible fuel economy gains. But GM's trying again, launching eAssist models of the 2016 Silverado and Sierra that are said to offer 2-mpg improvements in city, highway, and combined fuel economy ratings. Problem is, you probably won't be able to get one. Only 700 eAssist trucks will be made for the 2016 model year – 500 Silverados and 200 Sierras. When you consider that GM moved 824,683 examples of its light-duty pickups in 2015, this small run represents 0.08-percent of all Silverado/Sierra production, and GM says it "will monitor the market closely ... and adjust as appropriate moving forward." But that's not the only limitation. The eAssist trucks will only be sold through California dealers. For the Silverado, eAssist can only be optioned on the 1500 Crew Cab 1LT 2WD model, and for the Sierra, the fuel-saving technology is solely available on the 1500 SLT Crew Cab 2WD model with the SLT Premium Plus package. Granted, in terms of the Sierra, that means you get niceties like LED headlights and taillights, Apple CarPlay and Android Auto, Bose premium audio, heated seats and steering wheel, lane keep assist, and more. In the trucks, eAssist combines a small electric motor and 0.45-kWh battery pack with the pickups' 5.3-liter V8. GM estimates total output of 355 horsepower and 383 pound-feet of torque – no more horsepower than the non-eAssist trucks, but three more pound-feet of torque. GM says the eAssist trucks can tow up to 9,400 pounds, and the battery only adds 100 pounds to the trucks' weight. The electric motor provides 13 hp and 44 lb-ft of torque for a boost of acceleration off the line, or during passing. It also allows the engine to run in four-cylinder mode for longer periods of time. eAssist uses regenerative braking to help power onboard electrical systems, and adds start/stop to the powertrain. Finally, the so-equipped trucks have a six-percent improvement in aerodynamics, thanks to a soft tonneau cover and active grille shutters in the front fascia. Great news is, the eAssist option is relatively inexpensive, only costing $500. But good luck getting your hands on one.

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Can DARPA hack into a Chevy Impala through OnStar?

An ex-video game wizard named Dan Kaufman tracked a circuitous route to becoming the head of the Software Innovation Division at the Defense Advanced Research Projects Agency. DARPA normally makes these pages because of its work with autonomous vehicles and automobile technology that overlaps with military applications, but for the past five years Kaufman and his multiple research teams have been working on creating unhackable software code that could be used in military drones. Part of that work has involved hacking into just about everything else, and as a segment on 60 Minutes reveals, that includes cars. The masterminds discovered a way to hack into OnStar, the General Motors telematics system. After figuring out how to hook into OnStar's emergency communication system, they overwhelmed it with data. While the computer was busy trying to manage the overrun of data, the research team inserted code that took control of the sedan's other computers, giving it control. So while reporter Leslie Stahl tooled around in a parking lot, a DARPA researcher with a laptop would occasionally take control of the car, like by applying its brakes or, conversely, removing the ability for Stahl to use the brakes. Hacking into vehicles has been in the news for years: Car and Driver ran a feature on the various ways cars could be hacked in 2011, two hackers released a car-hacking code at the hacker-fest Defcon in 2013 and demonstrated how it worked on a Toyota Prius and Ford Escape, and German researchers demonstrated how they could hack into BMW's Connected Drive remote-services system last week via an attack on the cars' telematics units. This isn't about GM or Onstar or the future; hacking into cars of all kinds isn't coming, it's here, and it doesn't take the half-billion-dollar annual budget of a small DARPA division to do it. Check out the 60 Minutes video on the CBS site (you can watch the entire video from a mobile device without logging in). The OnStar hacking starts at 6:45, but it's worth watching what leads up to that. News Source: Jalopnik Chevrolet Safety Technology Infotainment Autonomous Vehicles Videos Sedan hacking 60 minutes