Reg Cab Long Bed 4x4 V8 Auto Trans 4.10 Rear Axle Alloy Wheels Cruise 1-owner on 2040-cars

Auto blog

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

Recharge Wrap-up: Chevy Volt's new, improved powertrain; Inabikari wants to build Tesla Model X fighter

We knew the 2016 Chevrolet Volt's new powertrain would provide more range, but we didn't know how much. According to GM's Executive Director Larry Nitz, it is about 12 percent more, overall. "I can't think of a powertrain we've re-engineered more extensively within a five-year period than this one," he said. The battery, electric drive system and gasoline generator have all been reworked to allow for an overall driving range of up to 425 miles, with electric range speculated to reach 42 miles or more. The new Volt will also benefit from 20 percent quicker low-end acceleration, weight reductions and improvements in NVH. Read more at Hybrid Cars and at the SAE website. Hyundai's FCEV research and development boss, Dr. Sae-Hoon Kim, is optimistic about the future of hydrogen mobility in Japan. With the Tucson Fuel Cell already in production ahead of Toyota's FCV, Hyundai has a foothold in the hydrogen car scene. Kim believes that since the Fukushima disaster, Japan's attitudes toward energy make it friendly to a growing hydrogen economy. He also says that hydrogen won't be limited to Hyundai, with Kia getting all the battery EVs. "Both types are for both companies," Kim says. "For the moment, volumes are small and it is not wise to have Hyundai and Kia competing." Read more at Just Auto. The Latvian/German startup Inabikari is using crowdfunding to build an electric crossover for Europe. The Rev.01 EV hopes to compete with Tesla's upcoming Model X with a range of over 400 miles and a five-second 0-60 time. The group currently is trying to raise initial funds through an Indiegogo campaign, with hopes of more investment in the future and sales beginning in 2017. See the video below, and read more at Hybrid Cars and at the Inabikari website. Fuel economy and emissions regulations could lead to some interesting design changes to automobiles. The World Light Duty Test Procedure, set to replace the New European Driving Cycle in 2017, will push automakers to find new ways to reduce drag on their vehicles. For better aerodynamics, we could see traditional side-view mirrors replaced by cameras that display what they see on screens inside the vehicle. Another likely change will be the introduction of smaller, narrower wheels. Improving the average drag coefficient from 0.32 to 0.20 could reduce CO2 emissions by as much as 20 percent. Read more at Automotive News Europe.

Foreign automakers pay from $38 to $65 per hour to non-union workers

As leaders for the United Auto Workers gather in Detroit for their Special Convention on Collective Bargaining to work out the negotiating stance for this year's new labor agreements with the Detroit 3 automakers, what they most want to do is figure out how to eliminate the two-tier wage scale. However, the lower Tier 2 wage has allowed the domestic automakers to reduce their labor costs, hire more workers, and compete better with their import competition. As it stands, per-hour labor rates including benefits are $58 at General Motors, $57 at Ford, and $48 at Fiat-Chrysler – a reflection of FCA's much greater number of Tier 2 workers. The Center for Automotive Research released a study of labor rates (including benefits) that put numbers to what the imports pay: Mercedes-Benz pays the most, at an average of $65 per hour, Volkswagen pays the least, at $38 per hour, and BMW is just a hair above that at $39 per hour. Among the Detroit competitors, Honda workers earn an average of $49 per hour, at Toyota it's $48 per hour, Nissan is $42 per hour, and Hyundai-Kia pays $41 per hour. The lower import wages are aided by their greater use of temporary workers compared to the domestics. Automotive News says the ten-dollar gap between those foreign camakers and the domestics turns out to about an extra $250 per car in labor, which adds up quickly when you're pumping out many millions of cars. That $250-per-car number is one that, come negotiating time, the Detroit 3 will want to reduce, as the UAW is trying to raise both Tier 1 and Tier 2 wages. Another wrinkle is that the domestic carmakers are considering the wide adoption of a third wage level lower than Tier 2. Some workers who do minor tasks like assembling parts trays kits and battery packs already make less than Tier 2, but the UAW will be quite wary about cementing yet another wage scale at the bottom of the system while it's trying to fight a bigger battle at the top. News Source: Automotive News - sub. req., BloombergImage Credit: AP Photo/Erik Schelzig Earnings/Financials UAW/Unions BMW Chevrolet Fiat Ford GM Honda Hyundai Kia Mercedes-Benz Nissan Toyota Volkswagen labor wages collective bargaining labor costs