2014 Chevrolet Silverado 1500 2lt on 2040-cars

Auto blog

GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch

According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.

GM Recalls 218,000 Chevy Aveo Models Over Fire-Prone Lighting

The recall train keeps on rolling for General Motors. Hot on the heels of its recent 2.4 million-vehicle recall of various models, it's now calling in 218,000 Chevrolet Aveo units from the 2004-2008 model years because they could catch fire. The problem concerns the daytime running light module in the instrument panel. It could overheat, melt and cause a fire. According to GM spokesperson Alan Adler, "We are aware of some fires," and the company "is still investigating." Adler wouldn't comment about how many fires were reported or when the automaker was first aware of this issue because of the ongoing analysis. However, he said the issue has not caused any injuries or fatalities. GM also doesn't have a fix for the problem with the DRL module yet. The company says in its recall statement to the National Highway Traffic Safety Administration that the remedy "is still under development." Adler wasn't sure when it would be ready, but he said Aveo owners would receive notification in the mail "relatively soon." They will receive a second letter later to schedule the repair. In a separate letter about the Aveo's problem to NHTSA (viewable here as a PDF), GM said its Executive Field Action Decision Committee decided to conduct the recall on May 16. Scroll down for the recall report. RECALL Subject : Daytime Running Light Module Overheating Report Receipt Date: MAY 19, 2014 NHTSA Campaign Number: 14V261000 Component(s): Potential Number of Units Affected: 218,000 Manufacturer: General Motors LLC SUMMARY: General Motors is recalling certain model year 2004-2008 Chevrolet Aveo vehicles equipped with daytime running lights (DRL). In the affected vehicles, there may be heat generated within the DRL module located in the center console in the instrument panel, which could melt the DRL module. CONSEQUENCE: If the DRL module melts due to the heat generation, it could cause a vehicle fire. REMEDY: The remedy for this recall campaign is still under development. The manufacturer has not yet provided a notification schedule. Owners may contact General Motors customer service at 1-800-222-1020 (Chevrolet). General Motors recall number for this campaign is 14236. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado