2010 Chevy Silverado 1500! Flawless And One Of A Kind! on 2040-cars

Auto blog

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

Weekly Recap: Autonomous driving goes commercial in Nevada

Nevada granted Daimler Trucks North America the first license to run an autonomous commercial vehicle on public roads in the United States Tuesday, marking another milestone in the technology's rapid advancement. Gov. Brian Sandoval and Daimler truck chief Wolfgang Bernhard promptly used the license to lap Highway 15 near Las Vegas in a newly revealed Freightliner Inspiration Truck. It was a clear signal that autonomous driving is big-rig reality, though it's still a long way from widespread use. Nevada certified two of Daimler's Freightliner Inspiration Trucks, which use the company's Highway Pilot system with a stereo camera, radar, and lane-keeping collision-prevention features to regulate the brakes and steering. The radar component has a long-range sensor that can cover 820 feet at an 18-degree angle and a shorter-range unit that stretches 230 feet at a 130-degree angle. The Inspiration trucks are based on the existing Freightliner Cascadia Evolution model used on US roads. In addition to the autonomous technologies, it also has futuristic design cues, including blue lighting in the front and a new hood and grille. While there are only two Freightliner Inspiration trucks in existence, Daimler expects to bring the Highway Pilot system into mass-produced big rigs by 2025, in time to capitalize on the market's predicted growth. The German truckmaker predicts the global hauling market will triple by 2050, and the United States will be a key part of that growth. Trucks carry 69.1 percent the nation's domestic freight tonnage and hauled 9.7 billion tons of freight in 2013, according to the American Trucking Association. Daimler expects autonomous driving to augment this growth, and perhaps evolve the role of the truck driver. Still, the company points out autonomous tech is not meant to replace drivers, but to assist them and relieve fatigue and monotony on long hauls. The driver has to stay in control for passing, in city traffic, and when hooking up the trailer. The company said autonomous driving also offers the potential for improved fuel economy – tests showed a five-percent gain – and lower maintenance costs. Daimler also said the technology could reduce congestion on the road. Much of this is attributable to the constant flow of traffic, which is aided by autonomous driving. While the benefits are becoming increasingly apparent, autonomous technology is still met with skepticism.

GM recalling 135,000 SUVs with plastic jacks that can break

General Motors is recalling 135,400 compact crossovers because their emergency jack can break under load. The problem occurs when the jack — which is plastic — isn't positioned correctly as detailed in the owner's manual. This can cause the jack to fracture. If the jack breaks and the vehicle collapses, there's a risk of injury or death, according to an NHTSA recall alert. The recall involves the 2020-22 Buick Encore GX and 2021-22 Chevrolet Trailblazer. A GM test driver discovered the problem when he broke a jack during a durability test on a Trailblazer. GM started investigating in April and found 21 claims of jack failures, including one reported injury. "This jack design may not be sufficiently robust against fractures if improperly or incorrectly positioned on the vehicle frame by the user," a NHTSA safety report said. GM will start notifying vehicle owners July 26. It will provide free replacement jacks that are made of metal.   Featured Gallery 2021 Buick Encore GX View 21 Photos Recalls Buick Chevrolet GM