2007 Chevrolet Silverado 1500 4wd Extended Cab Lt Short Box on 2040-cars

Auto blog

Cadillac XT4 crossover to be built in Kansas City

Cadillac's upcoming XT4, a crossover we've previously known as the XT3 in a long series of spy shots of heavily camouflaged mules, will be built at General Motors' assembly plant in Kansas City on the same platform as the Chevrolet Malibu, Bloomberg reports, citing people familiar with the plan. That will give Cadillac another entry in the red-hot luxury crossover segment and, GM hopes, help to reverse a sales slump in the U.S. It'll also breath life into the Kansas City plant that makes the slow-selling Malibu, where GM cut a third shift last year, by sharing the assembly line between the crossover and sedan and defraying costs for each vehicle. The XT4 was known most recently as the XT3, with styling cues based on the Escala concept sedan from 2016. It's slightly smaller than the XT5, Cadillac's top-selling vehicle, and will also augment the full-size Escalade in Cadillac's stable of SUVs when it makes its expected debut later this year. Cadillac last week reported its second-highest-ever sales mark with 356,467 vehicles, an increase of 15.5 percent over 2016. But that mark papers over an 8 percent sales decline in the U.S. to 156,440 vehicles. The luxury brand is on a hot streak in China, where sales jumped 50.8 percent last year to 175,489 units.Related Video: Image Credit: Brian Williams Plants/Manufacturing Cadillac Chevrolet GM Crossover sales cadillac xt5 cadillac xt4 cadillac xt3

2019 Chevy Silverado 1500 vs. 2019 Ram 1500 vs. 2018 Ford F-150: How they compare

The full-size pickup truck market is seriously hot right now. Both Ram and Chevrolet have introduced completely redesigned trucks, the 2019 Ram 1500 and the 2019 Chevy Silverado, and as the companies slowly roll each one out, more and more information comes to light. We've put together this comparison post to help you keep track of all the features and specifications of each of these new models, along with the updated 2018 Ford F-150. Among the stats we'll take a look at are engines, power, fuel economy, trim levels, weight and more. Weight savings Both the 2019 Ram 1500 and 2019 Chevy Silverado 1500 have gone on a diet for the new model year, similar to the one the F-150 went on in 2015. The Silverado is the weight-loss leader, having shed 450 pounds when comparing quad-cab V8 models. The Ram 1500 lost 225 pounds compared to the current truck. Both trucks achieve their weight loss in part due to the use of aluminum parts. On the Silverado, the hood, doors, and tailgate are aluminum, while on the Ram, just the hood and tailgate are aluminum on the body. Compare that to the F-150, which uses aluminum for all exterior body panels for a total weight loss of up to 732 pounds, which makes the aluminum-intensive F-150 the weight-loss leader. View 160 Photos Engines and transmissions There's only a bit of overlap in powertrains on the Ram 1500 and Chevy Silverado. Each has a V8 for the top engine. The Ram's is a 5.7-liter Hemi V8 making 395 horsepower and 410 pound-feet of torque. The Silverado will once again use a 6.2-liter V8 as its range topper with the same 420 horsepower and 460 pound-feet of torque as the current model. Both of these V8s boast some extra fuel saving technology. The Chevy's 6.2-liter (and some 5.3-liters) comes with the company's latest cylinder deactivation system that can shut off any or nearly all of the eight cylinders. The Ram's V8 boasts an optional 48-volt mild-hybrid system that, in addition to likely helping fuel economy, can provide up to 130 pound-feet of torque right off the line. With the Ram, fuel economy sees an improvement of 2 mpg in the city and combined ratings for 17 and 19 respectively. Highway fuel economy improves by 1 mpg to 23 with two-wheel drive and 22 with four-wheel drive. The Silverado's 6.2-liter V8 only improves city fuel economy by 1 mpg to 16, and actually loses 1 mpg on the highway. The new 5.3-liter engine with the fancy cylinder deactivation does see an improvement over the simpler version.

Watch the National Corvette Museum sinkhole being filled in by R/C cars

Okay, so not exactly cars, but Bobcats - but still quite cool. You might remember that the National Corvette Museum had that little divot that needed to be filled in. Turns out the construction firm of Scott, Murphy & Daniel doing the work is using two remote-controlled Bobcats to fill the sinkhole with "manufactured sand," which in this case is crushed limestone. It appears that the Bobcat company has offered remote operation since at least 2007 via a wireless transmitter that works up to 1,500 feet away. So yes, that means two SMD employees stand on the edge of the pit and flick joystick levers for hours at a time, one in charge of a Bobcat with a roller-compactor attachment, the other in charge of a Bobcat with a bucket. And that, to us, is a pretty good way to earn the daily bread. Check out the video above for the latest sinkhole update. News Source: National Corvette Museum via YouTube Auto News Weird Car News Chevrolet GM Videos rc car remote control National Corvette Museum bobcat ncm