''1978 Chevrolet Silverado Shortbed Factory Big-block 454'' on 2040-cars

Auto blog

This is your 2014 Chevrolet SS

Think you've waited long enough for this? If so, then you'll want to savor the high-res photos we've so far been given of the 2014 Chevrolet SS, the first rear-wheel-drive performance sedan from The Bowtie in 17 years.
We all know its our version of the brand new VF-model Holden Commodore, but what's under the hood that earns the appellation "performance?" A 6.2-liter LS3 V8 engine producing 415 horsepower and 415 pound-feet of torque. That's 35 hp and lb-ft less than the same engine is expected to produce in the 2014 Chevrolet Corvette. Chevrolet says the sedan will get from 0-to-60 miles per hour "in about five seconds."
Shifting comes courtesy of a six-speed automatic with paddles on the steering wheel, while stopping arrive via four-piston Brembo calipers up front, a single sliding piston in back. The forged aluminum wheels are 19-inchers all around, each set supporting right around 50 percent of the sedan's weight, and the aluminum hood and trunk are meant to keep the center of gravity low.

Here are a few of our automotive guilty pleasures

It goes without saying, but I'll say it anyway. The world is full of cars, and just about as many of them are bad as are good. It's pretty easy to pick which fall into each category after giving them a thorough walkaround and, more important, driving them. But every once in a while, an automobile straddles the line somehow between good and bad — it may be hideously overpriced and therefore a marketplace failure, it may be stupid quick in a straight line but handles like a drunken noodle, or it may have an interior that looks like it was made of a mess of injection-molded Legos. Heck, maybe all three. Yet there's something special about some bad cars that actually makes them likable. The idea for this list came to me while I was browsing classified ads for cars within a few hundred miles of my house. I ran across a few oddballs and shared them with the rest of the team in our online chat room. It turns out several of us have a few automotive guilty pleasures that we're willing to admit to. We'll call a few of 'em out here. Feel free to share some of your own in the comments below. Dodge Neon SRT4 and Caliber SRT4: The Neon was a passably good and plucky little city car when it debuted for the 1995 model year. The Caliber, which replaced the aging Neon and sought to replace its friendly marketing campaign with something more sinister, was panned from the very outset for its cheap interior furnishings, but at least offered some decent utility with its hatchback shape. What the two little front-wheel-drive Dodge models have in common are their rip-roarin' SRT variants, each powered by turbocharged 2.4-liter four-cylinder engines. Known for their propensity to light up their front tires under hard acceleration, the duo were legitimately quick and fun to drive with a fantastic turbo whoosh that called to mind the early days of turbo technology. — Consumer Editor Jeremy Korzeniewski  Chevrolet HHR SS: Chevy's HHR SS came out early in my automotive journalism career, and I have fond memories of the press launch (and having dinner with Bob Lutz) that included plenty of tire-smoking hard launches and demonstrations of the manual transmission's no-lift shift feature. The 260-horsepower turbocharged four-cylinder was and still is a spunky little engine that makes the retro-inspired HHR a fun little hot rod that works quite well as a fun little daily driver.

GM struggles to sell small cars, plans to lay off 2,084 employees at two plants

Due to low demand for some of its vehicles, General Motors plans to cut 2,084 jobs at its assembly plants in Lordstown, OH and Lansing, MI. At the same time, the automaker also announced plans to invest approximately $900 million in three of its facilities – the Toledo Transmission Operations in Ohio, Bedford Casting Operations in Indiana, and Lansing Grand River in Michigan - for future products. GM will discontinue the third shift at both the Lansing Grand River plant and the Lordstown, OH plant. The Cadillac ATS, Cadillac CTS, and Chevrolet Camaro are made at the automaker's plant in Michigan, which currently has 2,700 employees. The move to eliminate the third shift affects 810 hourly workers, as well as 29 salaried employees, starting on January 16th. The plant in Lordstown, OH currently has 4,500 employees and makes the Chevrolet Cruze sedan. The plan to discontinue the third shift will affect 43 salaried workers and 1,202 hourly employees and will start on January 23rd. As Fortune points out, sales of the Cruze are down 20 percent through October, while sales of the Cadillac ATS and CTS were down 17 percent through the same period of time. In addition to cutting the third shift at both assembly plants, the automaker plans to invest a total of $900 million between three of its facilities for unnamed future products. GM's Toledo Transmission Operations will receive $667.6 million, the Lansing Grand River Assembly plant will receive $211 million, and the automaker's Bedford Casting Operations will get $37 million. Last year, GM cut roughly 500 jobs from its Orion Township factory due to slow sales of the Chevrolet Sonic and Buick Verano, with surging crossover and SUV sales as the most likely culprit. With GM posting much healthier sales figures for the Chevrolet Equinox and Cadillac XT5 compared to the ATS, CTS, and Cruze, it looks like compact SUVs are to blame for this year's layoffs as well. Related Video: News Source: Fortune, General MotorsImage Credit: REUTERS / Rebecca Cook Hirings/Firings/Layoffs Plants/Manufacturing Cadillac Chevrolet GM Coupe Sedan Lordstown Ohio