Beautiful, Low Mileage 2003 Chevrolet Ssr on 2040-cars

Auto blog

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

GM learning from current Chevy Volt owners as it works on next-gen model

Details of the second-generation Chevrolet Volt extended-range plug-in hybrid are coming in at a trickle, and the latest is that the 2016 model-year Volt will be improved in all meaningful areas, including performance and all-electric range, says General Motors powertrain director Larry Nitz. 60 percent of Volt customers only charge using a standard 110 outlet. Nitz was speaking to Autoline After Hours about the current and future Volt. He said that GM has been tracking Volt driving habits and found that about two-thirds of the Volts' collective miles are driven in electric mode, and that 81 percent of all Volt trips were done in pure EV mode. Additionally, Volt drivers plug the car in 10 times each week, on average. Nitz also said 82 percent of the Volt's commuting miles are coming from the plug instead of the gas tank. Oh, and 60 percent of Volt customers only charge using a standard 110 outlet. Last month, GM released a teaser shot of the 2016 Volt (above) and said the car would make its worldwide debut at the 2015 North American International Auto Show next January. Earlier this year, the Volt was reported to be getting a new chassis for the upcoming version. The Volt could use a bit of new life. Through August, Volt sales were down 12 percent from a year earlier to 13,146 units, and sales plunged 25 percent alone. That compares unfavorably to the Nissan Leaf battery-electric vehicle, whose 2014 sales have jumped 34 percent to almost 19,000 units. You can see Nitz dish the goods in the video below (Volt comments start at around minute 15). You will also notice AutoblogGreen contributor Gary Witzenburg talk about his history with the EV1 and share his take on the Volt. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Leak reveals GM's 2017 heavy duty diesel trucks to get 910 lb-ft of torque [UPDATE]

UPDATE: Chevrolet officially announced specs for the 2017 Silverado HD and the rumors were true. The truck's new Duramax 6.6-liter turbo-diesel V8 puts out 445 horsepower and 910 pound-feet of torque. Chevrolet says the new motor produces 19 percent more torque and 12 percent more horsepower, while producing 35 percent fewer emissions. Overall, the new engine is a big improvement over the current motor, which generates 397 horsepower and 765 pound-feet of torque. According to Truck Trend, GM's newest heavy duty pickup trucks will pick up quite a bit more power and torque. The publication spotted a recent GM Powertrain ordering catalog that had the engine specs for the 2017 model year and managed to get some screenshots before the catalog was taken down, and they can be viewed here. The screenshots revealed that the 6.6-liter turbodiesel V8 powering the Silverado and Sierra heavy duty models will boast 445 horsepower and 910 lb-ft of torque. This is a substantial gain over the current models' 397 horsepower and 765 lb-ft of torque, and as Truck Trend points out, it exceeds the Ford Super Duty line's horsepower output of 440, but comes short of the 925 lb-ft rating. Truck Trend credits part of this output gain to the new intake system GM will introduce on the 2017 heavy duties. The intake gets 60 percent of its air from a scoop on the hood, with the other 40 percent coming from behind one of the front fenders. GM doesn't reveal horsepower figures in the press release about the scoop, but it does say the cooler air helps with maintaining the engine's output, and that the scoop does produce a ram-air affect, providing more air at speed. As we know, more air plus more fuel equals more power, but there's likely more to the power increase in this engine than only the intake. Related Video: News Source: Truck Trend via MSN Chevrolet GM GMC Truck Diesel Vehicles