Find or Sell Used Cars, Trucks, and SUVs in USA

1983 Chevrolet S10 Pro Street Or Drag on 2040-cars

US $10,000.00
Year:1983 Mileage:0
Location:

Breckenridge, Texas, United States

Breckenridge, Texas, United States
Advertising:

Chevy S10 Pro Street or Drag Race. It has a 355 Small Block Eagle Rotating Assembly, H-Beam rods, Comp Cams Solid lift Cam, has a timing gears no chain, 750 Demon Carb double pumper. It has a MSD Pro Billet distributor, 6AL Box with 3 step, MSD Adjustable Timing Control. It has a MSD Blaster Coil, Ceramic coated headers, Bob Glidden signature Wheels wrapped in a set of Micky Thompson Sportman Pro's. 33x19.5x15 Outback and skinnies up front. It has a Nitrous Plate system, adjustable to 450 HP using Nitrous Works Solenoids and purge kit. It has a 30 pound and 20 pound Nitrous bottle plum together. The Nitrous System has its own dedicated Battery and Holley Black Fuel Pump and filter. The truck has a separate fuel pump and filter. Chris Alston back half with ladder bar and coil over suspension. It has a narrowed 9 inch Ford rear end with 33 spline Moser Axle. Charging terminals and Shut off are mounted outside rear. It has all Automete Gauges with a memory tach. It also has a Stewart Warner Ultra shift light with RPM's displayed in it. It has line lock,B&M Shifter, 2 racing seats with covers and 2 sets of Pyrotect 5 point harnesses. It has a JW Power Glide with straight cut gears and a 180 first gear ratio. Also has a JW 8 inch converter and a 15 gallon fuel cell.
Truck has been 6.30's in the 8th mile with a 125 shot, runs 7's on motor.
Motor was freshened a year ago and has not been back to the track.
It can be street driven as well as Drag Raced.
Runs on 93 octane

Auto Services in Texas

Zoil Lube ★★★★★

Auto Repair & Service
Address: 3321 Fondren Rd, Fresno
Phone: (713) 783-2050

Young Chevrolet ★★★★★

New Car Dealers, Used Car Dealers
Address: 9301 E R L Thornton Fwy, Seagoville
Phone: (214) 328-9111

Yhs Automotive Service Center ★★★★★

Auto Repair & Service
Address: 19831 Greenwind Chase Dr, Katy
Phone: (281) 944-9748

Woodlake Motors ★★★★★

Used Car Dealers
Address: 2416 N Frazier St, Dobbin
Phone: (936) 441-3500

Winwood Motor Co ★★★★★

Auto Repair & Service, Gas Stations, Towing
Address: 4922 Graves Rd, Santa-Fe
Phone: (409) 925-2039

Wayne`s Car Care Inc ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Accessories
Address: 2725 S Cooper St, Richland-Hills
Phone: (817) 795-8436

Auto blog

GM to squeeze out more production capacity for midsize trucks

Tue, May 26 2015

General Motors was predicting a strong showing for the Chevrolet Colorado and GMC Canyon before they debuted, and demand among dealers for the midsize trucks even exceeded company's expectations. The positive situation has left GM with a problem, though: finding ways to increase capacity for the pickups at the Wentzville Assembly plant in Missiouri. With a third shift already running, GM has continued to look for ways to build just a few more of the trucks at the plant. The company has plans to hire as many as 1,000 more workers for the Saturday and Sunday shifts to construct an additional 2,000 pickups a month, according to unnamed insiders at the factory speaking to Automotive News. The little adjustments even extend to getting rid of an unpaid break to add 18 minute of assembly time over the course of a day, which equals about 3,500 more vehicles a year. All of this effort comes because the trucks are in such high demand. According to GM's figures, the company has delivered a combined 35,720 units of the Colorado and Canyon from January through April 2015, and the Chevy was the fastest-selling truck in the US for the previous three months. In May, it spent an average of just 12 days in showrooms before being snapped up. And even better for the company, 43 percent of these buyers came from other brands. According to Automotive News, the most popular trade-ins have included the Ford F-150, Toyota Tacoma, and Dodge Dakota. Related Video:

2014 Chevrolet Corvette Stingray convertible headed for Geneva debut

Mon, 28 Jan 2013

While most of the world is still coming down from all the hype surrounding the debut of the 2014 Chevrolet Corvette Stingray at the Detroit Auto Show earlier this month, we're already looking to the future. And according to Autoweek, the next chapter in the C7 story will unfold at the Geneva Motor Show in March. That's right, General Motors is reportedly using the Swiss stage as its venue to debut the Corvette Stingray convertible.
If this strikes you as odd, you aren't alone. After all, with a car that's such an American icon, we'd fully expect Chevrolet to unveil it here on our shores in either Chicago or New York. But according to Autoweek, GM is looking to boost export sales of its halo car, and since the C7 was engineered to compete with the world's best and brightest, showing it off in Geneva is somewhat of a smart move. What's more, those with sharp memories will recall that GM used the Geneva expo to debut the sixth-generation C6 Corvette convertible back in March 2004, so there's also a precedent.
Details surrounding the Corvette Stingray convertible are still slim, though we fully expect the 6.2-liter V8 and choice of either six-speed automatic or seven-speed manual transmissions to carry over unchanged. Prototypes spotted on the road showed the car fitted with a cloth convertible roof, as well.

GM investing $167m in Spring Hill for new midsize vehicles

Tue, 06 Aug 2013

General Motors has announced a large investment in its Spring Hill, Tennessee facility. The former home of Saturn production will be getting a $167 million addition to a previously announced $183 million, to cover a pair of new midsize vehicles. The investment is expected to create 1,800 jobs at the factory.
That $350 million is being divvied up for a pair of programs at Spring Hill. The first will take the bulk of the money ($223 million) and create 1,000 of the 1,800 jobs, while the other will take the remaining $127 million and generate the leftover 800 positions. But GM says the investment will cover "midsize vehicle programs." So what could they be?
The leading candidate in our minds is a new crossover for Buick, called the Anthem, that will slot between the Encore and Enclave, but will be slightly smaller than the Equinox and Terrain. As we've explained, the new model will likely be the first product to sport GM's new D2UX platform, which will eventually replace both the Delta and Theta platforms. Spring Hill is already building the Equinox, so there could be some credence to this theory.