1976 Chevrolet Luv Base Standard Cab Pickup 2-door 1.8l on 2040-cars

Auto blog

GM struggles to sell small cars, plans to lay off 2,084 employees at two plants

Due to low demand for some of its vehicles, General Motors plans to cut 2,084 jobs at its assembly plants in Lordstown, OH and Lansing, MI. At the same time, the automaker also announced plans to invest approximately $900 million in three of its facilities – the Toledo Transmission Operations in Ohio, Bedford Casting Operations in Indiana, and Lansing Grand River in Michigan - for future products. GM will discontinue the third shift at both the Lansing Grand River plant and the Lordstown, OH plant. The Cadillac ATS, Cadillac CTS, and Chevrolet Camaro are made at the automaker's plant in Michigan, which currently has 2,700 employees. The move to eliminate the third shift affects 810 hourly workers, as well as 29 salaried employees, starting on January 16th. The plant in Lordstown, OH currently has 4,500 employees and makes the Chevrolet Cruze sedan. The plan to discontinue the third shift will affect 43 salaried workers and 1,202 hourly employees and will start on January 23rd. As Fortune points out, sales of the Cruze are down 20 percent through October, while sales of the Cadillac ATS and CTS were down 17 percent through the same period of time. In addition to cutting the third shift at both assembly plants, the automaker plans to invest a total of $900 million between three of its facilities for unnamed future products. GM's Toledo Transmission Operations will receive $667.6 million, the Lansing Grand River Assembly plant will receive $211 million, and the automaker's Bedford Casting Operations will get $37 million. Last year, GM cut roughly 500 jobs from its Orion Township factory due to slow sales of the Chevrolet Sonic and Buick Verano, with surging crossover and SUV sales as the most likely culprit. With GM posting much healthier sales figures for the Chevrolet Equinox and Cadillac XT5 compared to the ATS, CTS, and Cruze, it looks like compact SUVs are to blame for this year's layoffs as well. Related Video: News Source: Fortune, General MotorsImage Credit: REUTERS / Rebecca Cook Hirings/Firings/Layoffs Plants/Manufacturing Cadillac Chevrolet GM Coupe Sedan Lordstown Ohio

Junkyard Gem: 2005 Chevrolet Aveo LS Sedan

The story of Daewoo in North America took some interesting plot turns over the decades. First we had the 1988-1993 Pontiac LeMans, a rebadged Daewoo LeMans. A bit later, Daewoo began selling cars under its own nameplate here, with the Lanos, Nubira, and Leganza available for the 1999-2002 model years. Then Daewoo fled the continent and left warranty service of those cars in the hands of Manny, Moe, and Jack. With GM taking over Daewoo Motors after Daewoo's bankruptcy, we got some Daewoos with Suzuki badges here— the Verona and the Reno— while Chevrolet began selling the South Korean-built Daewoo Kalos as the Aveo for the 2004 model year. This car may not be a gem in the sense that you would want to own one, but it's a gem of automotive history and thus deserves its place in this series (especially because it's one of the rare 5-speed cars sold here). Many (maybe even most) of these cars ended up in the hands of rental-car companies and other fleet users, but we can tell from the three-pedal setup that this car went to a non-fleet buyer. We've had a couple of these cars compete in the 24 Hours of Lemons, where I work as a dignified and respected race official, and they've been amazingly quick on a road course in the hands of good drivers. Power came from this 103-horsepower Opel-designed four displacing 1.6 liters. The Nubira and Lanos got versions of this engine on these shores, too. The LS was the top trim level for the Aveo in 2004, so this car got air conditioning and a halfway decent audio system (by 2004 standards). The seat fabric is industrial-grade stuff, which would have held up well under the steady drip and/or torrents of bodily fluids coating the interiors of rental cars. The 2004 Aveo LS started at $12,045, which comes to about $16,675 in 2020 dollars, so it was a lot of commuter-appliance for the price. The following generation of this car became the Chevrolet Sonic, beginning with the 2012 model year. You can still buy a new Sonic, and the inflation-adjusted price is nearly identical to that of the original AveoÂ… though you might want to move fast if you really want one, because Daewoo stopped selling the Kalos in South Korea not long ago. If you want the rarest member of the Aveo family available in North America, find yourself a hen's-teeth Pontiac G3, the short-lived Pontiac-badged version. Speaking of the G3, here's the way it broke the hearts of gas pumps around the world.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.