1957 Chevrolet Other Pickups on 2040-cars

Auto blog

Bob Lutz builds the case for a mid-engined Corvette

Rumors of a mid-engine Corvette are like automotive industry folklore at this point. Every once in a while, news pops up that it might be happening or is under development, but nothing actually ever comes to fruition as something people can actually buy. The latest spy shots strongly suggest a mid-engine 'Vette is in the cards, yet again, possibly for 2018. Now, an op ed by former General Motors executive (and definite performance car fan) Bob Lutz in Road & Track gives the inside scoop on the history of one of these proposals and lays out how to make it happen today. According to Lutz, the company's engineers believed the C6 ZR1 was at the limit for front-engine, rear-wheel drive performance in that package, and the only solution was to move the powerplant behind the driver. Lutz even got then CEO Rick Wagoner on board. The scheme made it at least as far as clay models for mid-engine versions of the 'Vette and Cadillac XLR. Eventually, a lack of money got in the way, though, bringing the project to an end. Lutz puts a lot of faith in GM's current leaders, especially Mary Barra and Mark Reuss. He thinks the chances of a mid-engine 'Vette happening this time are better than 50 percent. The model, rumored to be named Zora, could offer over 700 horsepower in an ultra lightweight body and be priced at about $120,000 to "suck the doors off everybody." Head over to Road & Track to get some insights from this highly respected and entertaining auto industry veteran. Related Video:

2014 Chevy Cruze Diesel arrives with 42 mpg for $25,695*

The last time General Motors had a diesel passenger car in the US, it was the 1.8-liter 1986 Chevette. At the 2013 Chicago Auto Show today, GM is unveiling the much-anticipated 2014 Chevrolet Cruze Diesel. The compact bows with a 2.0-liter turbo-diesel four-cylinder engine that boasts 148 horsepower and 258 pound-feet of torque, with full twist coming on at just 2,000 rpm. What's more, the common-rail, direct-injection diesel features an overboost function that allows the engine to deliver up to 280 lb-ft of torque for 10 seconds at a time. Even with 10 more horsepower and 110 more pound-feet of torque than the available turbocharged 1.4-liter four-cylinder in the Cruze, the 2.0-liter diesel engine can return up to 42 mpg (highway) bolted to its six-speed automatic transmission.
If you're counting, that figure meets the less powerful Cruze Eco with a six-speed manual transmission. More importantly, the auto transmission Cruze Diesel matches its main competition, the Volkswagen Jetta TDI, in highway fuel economy. The Cruze 2.0 TD (as it will be badged) can also handle up to 20 percent biodiesel (B20), whereas the Jetta is rated only for B5. General Motors has not released city fuel economy for its newest diesel, but we do know how much it will cost you to jump behind the driver's seat.
GM will kindly ask for $25,695, plus an $810 destination fee. That marks a $2,115 premium over a loaded Cruze LTZ Auto and $2,640 more than the Jetta TDI, though the MSRP will net you a leather interior, 17-inch alloy wheels and an Aero Performance Package, as well as a two-year maintenance plan and five-year, 100,000-mile powertrain warranty. Compared to the gas-powered Cruze, you also lose a couple cubic feet of rear cargo space thanks to a 17-liter diesel emission fluid tank. That urea fluid, which helps put the clean in clean diesel, will need to be refilled at least every 10,000 miles.

Driving Granatelli's turbine-powered 1978 Chevy Corvette [w/video]

With its curvy snout and feminine haunches, the third-gen Chevrolet Corvette looks like a dreamy – if dated – exemplar of Sports Car Fantasy 101 when viewed through modern eyes. This particular specimen circa '78, clad in silver and black paint with red pinstripes, appears to be a well-preserved example from the era. Apart from its low-profile Pirellis, slightly raised and slotted hood, spacious stance and a certain hand-painted descriptor alongside its crossed flag logos, you'd never guess there's a Space-Age propulsion unit powering this Coke bottle-bodied ride. Climb inside, and you're presented with aircraft gauges and big, colorful square buttons in the center panel. It takes a push of the "Ignitor" button, a tap of the starter button, and a slide of a T-handle for this nearly 40-year-old sports car to start sounding like Gulfstream G650 ready for takeoff. Yep, you're sitting in an 880-horsepower, turbine-powered Corvette, the only one of its kind in the world. Welcome to the whoosh. What The...? Built by Vince Granatelli, son of Indy 500 guru Andy Granatelli, this curious Corvette came into being by cramming a Pratt & Whitney ST6N-74 gas turbine engine into the donor car's lengthy front end. The same type of Jet A-burning mill powered Granatelli Senior's STP-sponsored racecar at the 1967 Indianapolis 500, where it famously led most of the 198 of 200 laps until a $6 transmission bearing failed, knocking it out of the race. The idea of turbine power usurping internal combustion was so threatening that Indy's governing body restricted turbine performance into obsolescence thereafter. A turbine-powered Corvette sounds excessive because it is. But there are also things about this 880-horsepower, 1,161-pound-feet monster that might surprise you. While it smacks of futurist exoticism and cost a then-dizzying $37,000 in 1967, the Canadian-built powerplant uses 80 percent fewer parts than an internal combustion V8 and will run on virtually anything combustible – whiskey, diesel, even Chanel No. 5. Though it's triple the length of a V8, the Pratt & Whitney beast weighs only 285 pounds. It's also one hell of a robust workhorse, typically serving as an auxiliary power unit for commercial aircraft or a generator in oil fields, where it can run for tens of thousands of consecutive hours before needing an overhaul. To adapt the Chevrolet for jet duty, the nose section was gutted and a sub-frame was built to compensate for the loosey-goosey front end.