on 2040-cars

Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

GM Ultium tech can scavenge heat from everywhere, even you

GM likes to give us tidbits about its Ultium platform from time to time, and today it’s telling us about the platformÂ’s ability to capture waste heat from the propulsion system. In addition to capturing from the propulsion system, it can also capture humidity from both inside and outside the vehicle and even from passengersÂ’ body heat. Yes, you, your family and/or your friends are a usable heat source as far as GM EVs are concerned. It then deploys the heat in an advantageous way. If at this point, youÂ’re screaming, "Heat pump!" youÂ’d be right. WeÂ’re talking about an elaborate heat pump system that GM is using for its Ultium-based vehicles. Every Ultium-based GM vehicle gets this system that is covered by 11 patents and four publications. The waste heat it collects is used in a number of ways, but its primary use is to heat the cabin quickly and efficiently. GM claims it can heat the cabin of its Ultium-based vehicles quicker than vehicles with traditional internal combustion engines. Plus, when put to use, GM claims that using the heat pump provides its EVs with up to 10% more range than theyÂ’d have without. Beyond heating the cabin, the heat pump is capable of putting waste heat to use by preheating the battery prior to charging so that you can charge quicker. The system can even cool the propulsion system in preparation for Watts to Freedom (WTF) launch control starts. GM says this was vital in helping the Hummer EV achieve its bonkers 0-60 mph time of about 3 seconds. “Having a ground-up EV architecture gives us the freedom to build in standard features like UltiumÂ’s energy recovery capabilities,” said Doug Parks, GM executive VP of global product development, purchasing and supply chain. “This helps us squeeze more efficiency, performance and overall customer benefit out of our EVs.” GM says itÂ’s been developing heat pump technology since the EV1 and its heat pump. This is the modern evolution of that technology, and GM says itÂ’s going to be implemented in every Ultium-based vehicle as a standard feature. Related video: Green Cadillac Chevrolet GM GMC Technology Electric Future Vehicles

Chevrolet Silverado reportedly getting the GMC Sierra's MultiPro tailgate

GMC reinvented the pickup tailgate when it added a six-way option named MultiPro to the current-generation Sierra it introduced in 2019. It kept this clever feature to itself as a way to differentiate the Sierra from the Chevrolet Silverado, but a recent report claims it will begin sharing it in the not-too-distant future. Enthusiast website GM Authority learned from anonymous sources familiar with Chevrolet's product plans that the Silverado will soon receive its own version of the MultiPro tailgate. It will be called either MultiFlex or Multi-Flex, a name Chevrolet has already trademarked, and it was initially scheduled to make its debut for the 2021 model year. Its arrival might be delayed until the 2022 model year due to the coronavirus pandemic, however. Chevrolet's Silverado and GMC's Sierra are nearly identical under the sheet metal, so adding the latter's six-way tailgate to the former will be a relatively straightforward and cost-effective process. Interestingly, GM Authority wrote engineers could add a seventh function to the tailgate, though it didn't reveal what they have in store. It's also not sure whether both trucks will get the new feature, or if it will exclusively be offered on the Chevrolet. 2022 will bring major updates to the Silverado and the Sierra, potentially including — as we've previously reported — an independent rear suspension. Interior upgrades will allegedly be part of the mid-cycle changes, too, but we still don't know if the Silverado will receive the tough carbon fiber cargo box available in the Sierra. In the meantime, motorists in the market for a Sierra will temporarily have fewer options to choose from. GMC has asked its dealers to stop taking orders for the regular- and double-cab variants of the truck, according to a separate report from GM Authority. Putting the slower-selling regular- and double-cab trucks on hiatus will allow dealers to build up their inventory of crew-cabs, which sell far better and are in relatively short supply. These restrictions will remain in effect until the 2021 model year, which starts on September 14 for double- and crew-cab models and on September 21 for regular-cab trucks. All three body styles will be available in 2021. Related Video: