1964 Chevy Ii Nova on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Is this '47 Chevrolet a rat rod or a sports car?

These days there are plenty of vehicles that blur the conventional automotive class structures. For instance, was the Honda Crosstour a wagon or an SUV? And what exactly was the Nissan Murano CrossCabriolet? Regardless, those line-blurring cars (or trucks) are out there, and though this one didn't roll off a production line, it's still quite the automotive head-scratcher. Hailing from Missouri, this epic creation is one part mad science experiment, one part 1947 Chevrolet pickup, and one part '95 Mercury Cougar. Add it all up and you get an awesome truck-sports-car hybrid, complete with an outrageous wing and a V8 to boot. And interestingly enough, it's up for sale . RELATED: Check out this Wild-Styled Lamborghini Rat Rod So how does it all come together? According to the listing, the Chevrolet truck cab (which had previously been chopped) was sanded down to bare metal and given a thorough shellacking of clear coat. It was then melded together with the front end of a 1995 Chevrolet S10 pickup truck, and set low to the ground on Bilstein suspension drop spindles. Stance achieved. But instead of fielding an engine from either of those pickups, it pulls its heart from a 2005 Chevrolet Tahoe SUV—a big 5.3-liter V8 heart, that is. It comes backed-up to a GM Turbo 400 automatic transmission. Towards the rear however is where things get really interesting. A Copper Pearl coated tube frame chassis both attaches the rear independent suspension (a la Mercury Cougar) to the racy spoiler, as well as secures the rat rod's rear-mounted radiator, fan, and fuel tank. I'm not quite sure why, but it just looks glorious. RELATED: Reports Say Mid-Engine Corvette Will Arrive in 2018 Inside the vintage cab, the Chevrolet furthers its racing proclivities (it's said to have won burnout and auto-cross events) with a pair of harnessed racing seats, a drift brake, a detachable steering wheel, and a tachometer with oil and temperature gauges, but oddly no speedometer. The shifter is a crescent wrench. And its shift boot? That's a Crown Royal Purple bag. All in all, this grin-worthy Frankenstein creation tallies up bits and pieces from four different vehicles (five if you include the Camaro wheels), which make it truly a mash-up of epic proportions. Internet, what do you think? Related Video: This article by Zach Doell originally appeared on Boldride. Design/Style Chevrolet Mercury Auctions Coupe Special and Limited Editions Classics eBay rat rod

Mark Reuss: GM can't afford product 'misses,' has 'thought about' CT6 V-Series

Mark Reuss is a busy man. He oversees General Motors' global product portfolio, an all-encompassing task for a company that sold more than 9.9 million cars and trucks last year. When GM launches a well-received product, like the road-going rocket ship that is the Chevrolet Corvette Z06 – he gets credit. When the company stumbles with the slow-selling Chevy Malibu or grapples with fallout from the decade-old Saturn Ion and its flawed ignition switch, he gets blamed. GM owners, the press and sometimes the federal government, demand answers. Bob Lutz famously held the job before Reuss. So did Mary Barra, who's now GM's chief executive. There's a New GM, but the lineage is connected to a long history. When he's not thinking product, Reuss, an executive vice president, also runs the purchasing and supply chain for the company, which is still one of the largest industrial empires in the world. We caught up with Reuss on the floor of the New York Auto Show, where GM had just rolled out two crucial new products: the 2016 Cadillac CT6 and the 2016 Chevrolet Malibu. Speaking with a small group of reporters, Reuss delved into a variety of subjects, including the new Malibu, Cadillac's future (he thinks the ATS-V is going to "flame the M3 and M4"), and other topics. On fixing the Malibu: "We can't miss. We can't have those kinds of misses [like the previous generation] on our cars and crossovers and trucks. We can't do that. If we do that, we give a reason for someone to go buy something else. It's that simple. "On a car like the Malibu we have a chance to really fix all of that, which we have, and then lead. Then you've got a real opportunity there. So that's what we've really been focused on here – to fix those things." He later added: "We need that car here to transform Chevrolet desperately because it's the heart of the market. And when you think of Chevrolet, people will come back and think about what we did with the [new] Malibu and the Cruze... It's hugely important to us." On Cadillac: "If we go out and try and out-German the Germans, it's probably not going to work. We've got an opportunity here generationally where there's a lot of people younger than me that have parents that drove BMWs and Mercedes, and I think there's an opportunity there for those people to drive something different than what their parents did, and I think that's always been an opportunity in the auto industry if you look at the history of it.