Find or Sell Used Cars, Trucks, and SUVs in USA

1963 Chevy Nova Wagon Lowrider Hotrod Custom on 2040-cars

Year:1963 Mileage:60000
Location:

Flower Mound, Texas, United States

Flower Mound, Texas, United States
Advertising:

1963 chevy II 4 dr wagon
70's chevy truck 250 six cylinder/3 spd manual
Bridged rear with 2 pump 4 dump hydraulics, 4 new batteries, uses stock coil springs all around, so still rides like a stock 63 nova
Rust free california car, 2 layers of sound deadener in floors.
Car was completely disassembled, blocked, worked, primed.
Custom 3 shade green, 5 shade pearl fade paint job
Dash has green graphic paint
Custom painted steering wheel
Every single piece of glass was removed, polished, and reinstalled with new gaskets, and polished trim.
New headliner is 90% installed, still needs rear section stretched.
New acc "vette teal" loop carpet installed
New front and rear chrome bumpers installed
Car has nice seats, but they are grey in color, I was doing an all white interior, so the seats can either be dyed, or recovered to match
The car still needs door panels built and upholstered
All chrome/stainless has been polished, except the front hood diecast which I would rechrome
All 4 doors are shaved, front doors are actuated by keyless popper
This car is 90% finished, and all the parts are there to finish it, needs a little assembly.
Runs and drives great, clear Ca. title.
I have over 14k invested in this car, not counting labor.
It comes with many parts still to be installed, speakers, sub, dual reservoir master cylinder, new dome light and lense, all interior window and door cranks. A set of stock steel wheels with nice tires, and a set of appliance chrome wire wheels and almost new tires. Etc.

Things I've replaced NEW
Front bumper
Rear bumper
Door fuzzies
Door weather-strip
Windshield gasket
Cowl seal
Tailgate gasket
Tailgate glass fuzzies
Side cargo glass seals
Vent window seal
Rear door 1/4 window seals
Rear bumper seal
Front door vent wing assemblies
Tailgate hinge seals
Headlight bezels
Front turn bezels
Front turn lenses
Taillight lenses
Acc carpet kit
Headliner
All pinch moloding
Rearview mirror
Rearview mirror arm
Dome light assembly
Dome light lense
Interior door handles
Interior window handles
Chrome gas filler
Door sill plates
Accelerator pedal
Turn signal switch and cam
Upper column bearing
Shifter bushings
4 new batteries for hydros
6 new accumax hydro solenoids
Steel braided dump hoses
Zeon onboard 48v battery charger
Autopage keyless module and 2 front door poppers
Kenwood xr 900-5 amp
5 layer custom car cover
Oil and temp sending units

OTHER PARTS
1958 impala steering wheel and horn ring
1963 nova ss gauge cluster
14x6 appliance wire wheels
175/70/14 whitewalls
13x6 cragar 4 lug S/S
155/80/13 whitewalls
1963 texas car plates
Stock steel wheels and caps
185/80/13 whitewalls
Polk dxi 10" sub
2 pr polk db651 spkrs
1965 nova dual res master cylinder

 

I WILL HAVE BETTER PICS THIS WEEKEND.

FEEL FREE TO EMAIL ANY QUESTIONS.

Auto Services in Texas

Z Rated Automotive Sales & Service ★★★★★

Used Car Dealers, Automobile Parts & Supplies, Automobile Accessories
Address: 316 County Road 266, Leander
Phone: (512) 355-3715

Xtreme Tinting & Alarms ★★★★★

Auto Repair & Service, Window Tinting, Industrial Equipment & Supplies
Address: 6700 Louetta Rd, The-Woodlands
Phone: (866) 595-6470

Wayne`s World of Cars ★★★★★

Auto Repair & Service
Address: 2124 Picadilly Dr, Leander
Phone: (512) 388-2052

Vaughan`s Auto Glass ★★★★★

Automobile Parts & Supplies, Glass-Auto, Plate, Window, Etc, Windshield Repair
Address: 6404 W Highway 80, Verhalen
Phone: (866) 595-6470

Vandergriff Honda ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 1104 W Interstate 20, Kennedale
Phone: (877) 371-8471

Trade Lane Motors ★★★★★

Used Car Dealers
Address: 6375 Richmond Ave, Alief
Phone: (713) 782-1544

Auto blog

What if the mid-engine Corvette is really a Cadillac?

Tue, Jun 28 2016

Call me crazy, but I'm not convinced the mid-engine Corvette is the next Corvette. The rumor is strong, yes. And, contrary to some of the comments on our site, Car and Driver - leader of the mid-engine Corvette speculation brigade - has a pretty good record predicting future models. But it's another comment that got me thinking: or maybe it's a Cadillac. There is clearly something mid-engine going on at GM, and I think it makes sense for the car to be a Cadillac. First off, check out how sweet the 2002 Cadillac Cien concept car still looks in the photo above. Second, there are too many holes in the mid-engine Corvette theory. There are too many holes in the mid-engine Corvette theory. The C7 is relatively young in Corvette years, starting production almost three years ago as a 2014 model. Showing a 2019 model at the 2018 North American International Auto Show would kill sales of a strong-selling car before its time. Not to mention it would only mean a short run for the Grand Sport, which was the best-selling version of the previous generation. More stuff doesn't add up. Mid-engine cars are, in general, more expensive. Moving the Vette upmarket leaves a void that the Camaro does not fill. There's not much overlap between Camaro and Corvette customers. Corvette owners are older and enjoy features like a big trunk that holds golf clubs. Mid-engine means less trunk space and alienating a happy, loyal buyer. Also, more than 60 years of history. The Corvette is an icon along the likes of the Porsche 911 and Ford Mustang. I'm not sure the car-buying public wants a Corvette that abandons all previous conventions. And big changes bring uncertainty - I don't think GM would make such a risky bet. Chevrolet could build a mid-engine ZR1, you might say, and keep the other Corvettes front-engine. Yes they could, and it would cost a ton of money. And they still need to fund development of that front-engine car. I highly doubt the corporate accountants would go for that. But a Cadillac? Totally. Cadillac is in the middle of a brand repositioning. GM is throwing money at this effort. A mid-engine halo car is the just the splash the brand needs to shake off the ghosts of Fleetwoods past. And it's already in Cadillac President Johan De Nysschen's playbook. He was in charge of Audi's North America arm when the R8 came out. A Caddy sports car priced above $100,000 isn't that unreasonable when you can already price a CTS-V in that range.

Why does the Corvette Stingray have so many vents? Here's why

Sun, 27 Jan 2013

Just looking at the new 2014 Chevrolet Corvette Stingray, it's not hard to see that the car's design was created with aerodynamics at the forefront, but Chevrolet designers point out exactly what went into designing the iconic coupe in a pair of recently released videos. The videos show the Corvette going through early design phases, including clay models and wind tunnel tests, as well as talking to the car's chief engineer, Tadge Juechter.
Both videos help explain various aspects of the C7 Corvette, but it's the aero tuning of the car that is most interesting. This includes extra attention paid to the lower air dam and vented hood to help reduce drag and lift, while the rear quarter inlets are for differential and transmission cooling. Juechter said that some of these aero-tuned elements were inspired from GM's involvement in racing.
If you have about five minutes and you can't get enough information about the new 'Vette, then check out the videos posted below.

GM wants to have 10 plug-in models in China in five years

Sun, Apr 24 2016

Last we checked, General Motors was selling all of three plug-in vehicle models in its home country of the US, and is prepared to make the Chevrolet Bolt EV available on these shores later this year. So it's notable that the automaker is hatching plans to have at least 10 plug-in variants for sale in China within the next five years, according to Hybrid Cars. Which plug-ins are coming remains a mystery. GM started selling a hybrid version of the Buick LaCrosse in China this month. The strategy makes sense, as China is now the world's largest car market, and accounts for about a third of GM's annual revenue. The automaker, which operates in China under the SAIC-GM and SAIC-GM-Wuling joint ventures, sells cars there under the Chevrolet, Buick, Cadillac, and Boujun badges, and has been doing so for the better part of two decades. Most recently, GM started selling a hybrid version of the Buick LaCrosse in China this month. What we do know is that GM is building its Cadillac CT6 Plug-in Hybrid in China, with distribution to be split between China and the US. That model, which is scheduled to start sales by the end of the year, is being built overseas because of a combination of Chinese government support for new-energy vehicle technology through incentives and the fact that battery-pack maker LG Chem makes most of its cells in nearby South Korea. The plug-ins are part of a broader plan by General Motors to either introduce or substantially tweak about 60 models by the end of the decade. With such new models, GM looks to boost unit sales by as much as five percent a year for the next few years. As for the other nine plug-in models slated for China by 2021, the company is mum. GM spokesman Dan Flores declined to comment to AutoblogGreen. Related Video: Featured Gallery 2016 Cadillac CT6: First Drive View 32 Photos News Source: Hybrid Cars Green Cadillac Chevrolet GM Electric Hybrid PHEV