2014 Chevrolet Malibu 1lz on 2040-cars

Auto blog

China's rise, global restructuring wither GM's Korea division

An article in the Daily Kanban suggests the sun is setting on GM Korea, and it could already be well into dusk. GM Korea came about when General Motors, along with co-investors SAIC and Suzuki, bought Daewoo Motors from parent company Daewoo Group in 2001; it had a previous tie-up with GM, a joint venture that ended in 1992, although Daewoo cars were based on GM cars until 1996. Over the decade following the purchase, it became such an important part of operations that it was renamed GM Korea in 2011, "to reflect its heightened status in [the] global operations of GM." Just two years later, the printed rumors were that the subsidiary responsible for a fifth of Chevrolet's global production could be shutting down. The division's sales were down almost 21 percent through November of last year, counting domestic South Korean sales, exports, and CKD – Complete Knock Down – products. That makes the labor strife, already an issue for four years, even more acute, reports say the subsidiary will lose $36 million a year if it can't get the job and wage cuts it wants, and government concessions can't make up for the losses. And it gets worse, so head over to Daily Kanban to read the rest of the story.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

Nissan recalls 3.5 million vehicles over airbag sensor

Nissan is recalling 3.53 million vehicles globally – 3.2 million in the United States – because the front passenger airbag may or may not deploy properly in the event of a crash. In affected vehicles, the occupant sensing system may not properly register a person sitting in the passenger seat. Passenger-side airbags in roughly 622,000 Nissan Sentra models built between 2013 and 2016 may deploy in crashes when they shouldn't, such as when a child is in the seat. 2016-2017 Nissan Maxima, 2013-2016 Nissan Altima, NV200, and LEAF, 2013-2017 Nissan Pathfinder, 2014-2016 Nissan NV200 Taxi, Infiniti QX60 and Q50, 2014-2017 Nissan Rogue, 2015-2016 Nissan Murano, Chevrolet City Express and 2013 Infiniti JX35 vehicles suffer from the opposite problem. In those models, the airbag may not deploy when it is supposed to. Nissan is aware of at least three crashes where airbags in one of the above models did not function properly, resulting in "moderate injuries." There have already been four recalls since 2013 for similar issues in Nissan vehicles. If you own one of these cars, expect a letter from Nissan in short order (or from GM if you own a Chevy City Express). Related Video: RECALL Subject : Passenger Air Bag may not Deploy due to OCS Error , 1 INVESTIGATION(S) Report Receipt Date: APR 26, 2016 NHTSA Campaign Number: 16V244000 Component(s): AIR BAGS Manufacturer: Nissan North America, Inc. SUMMARY: Nissan North America, Inc. (Nissan) is recalling certain model year 2016-2017 Nissan Maxima, 2013-2016 Nissan Altima, NV200, LEAF and Sentra, 2013-2017 Nissan Pathfinder, 2014-2016 Nissan NV200 Taxi, Infiniti QX60 and Q50, 2014-2017 Nissan Rogue, 2015-2016 Nissan Murano, Chevrolet City Express and 2013 Infiniti JX35 vehicles. In these vehicles, the front seat passenger Occupant Classification System (OCS) may incorrectly classify an adult passenger as a child or classify the seat as empty despite it being occupied. As a result, the passenger frontal air bag may be turned off and not deploy in the event of a crash. CONSEQUENCE: If the passenger frontal air bag does not deploy as intended in the event of a crash, the passenger is at an increased risk of injury. REMEDY: Nissan will notify their owners. Chevrolet City Express owners will be notified by General Motors.