2006 Chevrolet Malibu Lt on 2040-cars

Auto blog

Recharge Wrap-up: Range-extended EV taxis in London, 2016 Chevy Volt interior two years old

The first Metrocab range-extended EV taxis are operating on the streets of London. The cabs use a 12.2-kWh battery and two 50-kW motors, as well as a 1.0-liter gasoline range extender. Fuel economy is 98 MPGe on the ECE101 cycle, and total driving range is over 348 miles before needing to charge or refuel. Cabbies can expect to save GBP20 to GBP40 (about $30 to $60) per day on average. "The cash savings on fuel are significant, the ride and comfort outstanding, and my first customers are thrilled with the new cab," says the first operator of the new EV taxi, Preston Morris. "With its air suspension providing unrivaled comfort, panoramic glass roof for views of the city and silent powertrain, what's not to like?" Read more in the press release below. Chevrolet has had the interior design of the 2016 Volt finished for two years already, according to GM interior designer John McDougall. Beginning around 2010, GM received sketches from designers worldwide before narrowing it down to a handful of designs. Then the top three choices were molded from clay. The chosen theme was then refined for up to 18 months. "Every little thing you can imagine goes into that," says McDougall. "The glare angle from the windows, the placement of the controls, the placement of the seat. You have to create something that's beautiful and functional." Read more at GM Authority and at Inside EVs. More details have emerged about the Second Life Batteries Alliance. Vattenfall has announced a research project in partnership with BMW and Bosch to use retired EV batteries for stationary, grid-connected energy storage in Hamburg, Germany. Over 100 lithium-ion batteries from BMW i3 and ActiveE vehicles will make up a two-mWh storage unit for grid balancing, enough to power 30 four-person households for a week. The system is "compact enough to fit in a small building," says Bosch. Such storage systems are especially fit for storing and moving alternative forms of energy, which often fluctuate in supply more than electricity from a traditional power plant. Vattenhall will operate the storage unit for 10 years, with Bosch managing the batteries, during which time the three partners hope to learn more about battery applications and their performance over time. Read more at Green Car Congress, or in the press release below.

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

Chevy confirms 2016 Camaro will have wheels, brakes

Good news, everyone! Chevrolet has issued yet another round of teaser images and information about the sixth-generation Camaro, set to debut in Detroit on May 16. This time around, Chevy's teaser images confirm that the new car will not only have wheels and tires (Goodyear Eagle F1s, no less), but brakes as well. On top of that, we now know that the new Camaro will be 28-percent stiffer than the outgoing model. "The more rigid body structure allowed the engineers to more precisely calibrate the steering and suspension systems because they didn't have to compensate for chassis flex. The lighter structure also enabled the size and mass of elements such as the wheels, tires and brakes to be scaled accordingly," GM said in a press release, which you can read below. We've already learned that the new coupe will be 200 pounds lighter than its predecessor, has a bunch of unique parts, and according to GM's Mark Reuss, will outperform the Ford Mustang in every way. Now, it's only a matter of time before we see the sixth-gen Camaro, but surely not before Chevy issues even more teasers and information. Related Video: 2016 Camaro is Stronger, Lighter and More Responsive Computer aided engineering contributes to 28 percent greater structural stiffness DETROIT – The engineering team spent 9 million hours of computational time honing the driving experience of the all-new 2016 Chevrolet Camaro before the first prototype turned a wheel. The structural modeling led to the Gen 6 Camaro being 28 percent stiffer than the current model. "The modeling abilities of computer aided engineering are advancing at incredible rates," said Jim Karlavage, Camaro program engineering manager. "Today, we can accurately model opportunities to add torsional strength without adding unnecessary mass. The result is a lighter, stiffer structure that benefits every aspect of the driving experience." The more rigid body structure allowed the engineers to more precisely calibrate the steering and suspension systems because they didn't have to compensate for chassis flex. The lighter structure also enabled the size and mass of elements such as the wheels, tires and brakes to be scaled accordingly. "The structural weight savings are compounded by opportunities to reduce un-sprung weight," said Karlavage.