2007 Chevrolet Impala Lt on 2040-cars

Auto blog

GM Recalling Another 2.7 Million Vehicles In Five Separate Campaigns

The recalls keep rolling in from General Motors, evidently keen to avoid repeating the mistakes of the ignition-switch debacle and clean house. This time they're all coming at once, with five separate recalls announced together covering approximately 2.7 million vehicles. The largest of the five actions involves over 2.4 million units of the previous-generation Chevrolet Malibu and Malibu Maxx, Pontiac G6 and Saturn Aura in order to fix brake light wiring harness, which have been found to be susceptible to corrosion. The recall is separate from the 56k Aura sedans which GM recently recalled over faulty shift cables, not to mention the previous massive recall of 1.3 million vehicles – some of them the same models – but appears to have resulted from the National Highway Traffic Safety Administration investigation that started with the G6 almost a year ago. The second-largest campaign involves the 2014 Chevy Malibu, specifically those fitted with GM's 2.5-liter engine and stop/start system, approximately 140,000 examples of which has been found to have problematic brakes. The issue does not appear to be connected to the recall of 8k Malibu and Buick LaCrosse sedans (also involving brake woes) which we reported upon last week. Four crashes have been reported in such models, but GM admits it's not yet clear if the problem was a contributing factor in the accidents. A further 112k Corvette models from the 2005-2007 model years are being called in for problems with their low-beam headlamps resulting from a flexing relay control circuit wire that's not meant to bend. GM says it is "aware of several hundred complaints" about this issue, but notes that there have been no reports of related accidents. In addition, over 19k examples of Cadillac CTS from the 2013 and 2014 model years are being recalled over windshield wipers that might not work after a jump start. Finally, GM is also bringing in 477 examples of its 2014 Chevy Silverado, Tahoe and GMC Sierra (though not the Yukon) to fix a problem with a tie rod in its steering rack. As ever, all recall repairs will be performed free of charge, and GM is now estimating that recall-related actions this quarter will result in an estimated $200-million charge against its second-quarter earnings. Read the full announcement from GM below for further details.

What if the mid-engine Corvette is really a Cadillac?

Call me crazy, but I'm not convinced the mid-engine Corvette is the next Corvette. The rumor is strong, yes. And, contrary to some of the comments on our site, Car and Driver - leader of the mid-engine Corvette speculation brigade - has a pretty good record predicting future models. But it's another comment that got me thinking: or maybe it's a Cadillac. There is clearly something mid-engine going on at GM, and I think it makes sense for the car to be a Cadillac. First off, check out how sweet the 2002 Cadillac Cien concept car still looks in the photo above. Second, there are too many holes in the mid-engine Corvette theory. There are too many holes in the mid-engine Corvette theory. The C7 is relatively young in Corvette years, starting production almost three years ago as a 2014 model. Showing a 2019 model at the 2018 North American International Auto Show would kill sales of a strong-selling car before its time. Not to mention it would only mean a short run for the Grand Sport, which was the best-selling version of the previous generation. More stuff doesn't add up. Mid-engine cars are, in general, more expensive. Moving the Vette upmarket leaves a void that the Camaro does not fill. There's not much overlap between Camaro and Corvette customers. Corvette owners are older and enjoy features like a big trunk that holds golf clubs. Mid-engine means less trunk space and alienating a happy, loyal buyer. Also, more than 60 years of history. The Corvette is an icon along the likes of the Porsche 911 and Ford Mustang. I'm not sure the car-buying public wants a Corvette that abandons all previous conventions. And big changes bring uncertainty - I don't think GM would make such a risky bet. Chevrolet could build a mid-engine ZR1, you might say, and keep the other Corvettes front-engine. Yes they could, and it would cost a ton of money. And they still need to fund development of that front-engine car. I highly doubt the corporate accountants would go for that. But a Cadillac? Totally. Cadillac is in the middle of a brand repositioning. GM is throwing money at this effort. A mid-engine halo car is the just the splash the brand needs to shake off the ghosts of Fleetwoods past. And it's already in Cadillac President Johan De Nysschen's playbook. He was in charge of Audi's North America arm when the R8 came out. A Caddy sports car priced above $100,000 isn't that unreasonable when you can already price a CTS-V in that range.

How Chevy Silverado, GMC Sierra will take on the Ford F-150 profit machine

FORT WAYNE, Ind. — When General Motors engineers were developing the 2019 Chevrolet Silverado and GMC Sierra pickup trucks, some of them joined public tours of Ford's Dearborn, Mich., factory to watch aluminum-bodied F-Series trucks go down the assembly line. The redesign of the Ford F-Series trucks, launched in 2014, set a new standard for fuel economy and lightweight vehicle construction. But armed with stopwatches and trained eyes, the GM engineers believed they saw problems. "They had a real hard time getting those doors to fit," Tim Herrick, the executive chief engineer for GM truck programs, told Reuters. His team did more intelligence gathering. They bought and tore apart Ford F-Series doors sold as repair parts. Their conclusion: GM could cut weight in its trucks for a lower cost using doors made of a combination of aluminum and high-strength steel that could be thinner than standard steel, shaving off kilograms in the process. These pounds-and-pennies decisions will have major implications in the highest-stakes game going in Detroit: dominance in the world's most profitable vehicle market, the gasoline-fueled large pickup segment. What's more, GM is banking on strong sales of overhauled 2019 Silverados and GMC Sierras to fund its push into automated and electric vehicles — a business many investors see as the auto industry's long-term future. The risks are high given the hits automakers have taken from U.S. President Donald Trump's trade policies. Rising aluminum prices spurred by Trump's tariffs are driving up costs on the Ford's F-Series, while rising steel and aluminum prices likewise drag on GM results. GM also has a significant risk should the United States, Mexico and Canada fail to agree on a new NAFTA trade deal, given GM trucks built at its Silao, Mexico, factory could face a 25 percent tariff if NAFTA collapses. Major profit per truck Interviews with GM executives and a tour at its factory here in northwest Indiana provide a detailed look inside GM's plan for the most important vehicles in its global lineup. These big pickups are everything Tesla's Model 3 or Chevy's Bolt electric car is not. The mostly steel body is bolted to the truck's steel frame, rather than the one-piece body and frame electric vehicles. The majority of trucks will have a V-8 gasoline engine powering the rear wheels — like the classic GM cars of the 1950s. Some Silverados will have new four-cylinder engines, but there is no electric or hybrid offering as of now.