1996 Chevrolet Impala Ss Super Clean, Fully Loaded, All Stock on 2040-cars

Auto blog

Weekly Recap: Racing legend Jim Hall explains Chevy's futuristic Chaparral concept

"I said our cars are built to be winners." – Jim Hall Racing legend Jim Hall never thought he'd be a video game consultant, but when Chevrolet asked for his advice to create a futuristic Chaparral for the Vision Gran Turismo series, he was eager to help. He reviewed early sketches and suggested some changes that made it onto the concept, including the addition of a camera that's mounted onto a mast over the cabin to aid the driver. The Chevy Chaparral 2X Vision Gran Turismo concept was revealed this week at the Los Angeles Auto Show and will be part of a downloadable update for PlayStation 3's Gran Turismo 6 in December. Theoretically, at least, it uses a laser-beam propulsion system and an air-powered generator to produce 900 horsepower in the video game. It's capable of sprinting to 60 miles per hour in 1.5 seconds en route to a top speed of 240 mph. Those gaudy performance specs – even in the virtual world – came at Hall's urging. "I said our cars are built to be winners," Hall told Autoblog on the floor of the Los Angeles show. The 79-year-old drove Lotus racecars in Formula One before launching the successful Chaparral Cars in the 1960s. Like his innovative Can-Am racers, the Vision Gran Turismo project has an eye toward the future. It also introduces the iconic Chaparral name to a new generation of fans, and hopefully, Hall says, gets them excited about engineering and design. "It emulates what we did in the '60s," he said. And what they did back then still resonates. Chaparral Racing and Chevy partnered more than 45 years ago for development work on the composite monocoque chassis, lightweight alloy powertrains, automatic gearboxes and active aerodynamics. "He [Hall] walked right back into this and was able to apply thinkings and learnings," said Clay Dean, General Motors executive director of advanced design. The Chevy Chaparral 2X Vision Gran Turismo concept was created at GM's North Hollywood advanced design studio, and it will be on display at the show through November. Other News and Views Sebastian Vettel joins Ferrari team in 2015 Ferrari confirmed that four-time Formula One World Champion Sebastian Vettel will join the Scuderia for the 2015 season, jettisoning Ferrari's current ace, two-time champ Fernando Alonso. Vettel has been F1's most successful driver since Michael Schumacher, though he's struggled to match his previous accomplishments in 2014.

2019 Chevy Silverado 1500 vs. 2019 Ram 1500 vs. 2018 Ford F-150: How they compare

The full-size pickup truck market is seriously hot right now. Both Ram and Chevrolet have introduced completely redesigned trucks, the 2019 Ram 1500 and the 2019 Chevy Silverado, and as the companies slowly roll each one out, more and more information comes to light. We've put together this comparison post to help you keep track of all the features and specifications of each of these new models, along with the updated 2018 Ford F-150. Among the stats we'll take a look at are engines, power, fuel economy, trim levels, weight and more. Weight savings Both the 2019 Ram 1500 and 2019 Chevy Silverado 1500 have gone on a diet for the new model year, similar to the one the F-150 went on in 2015. The Silverado is the weight-loss leader, having shed 450 pounds when comparing quad-cab V8 models. The Ram 1500 lost 225 pounds compared to the current truck. Both trucks achieve their weight loss in part due to the use of aluminum parts. On the Silverado, the hood, doors, and tailgate are aluminum, while on the Ram, just the hood and tailgate are aluminum on the body. Compare that to the F-150, which uses aluminum for all exterior body panels for a total weight loss of up to 732 pounds, which makes the aluminum-intensive F-150 the weight-loss leader. View 160 Photos Engines and transmissions There's only a bit of overlap in powertrains on the Ram 1500 and Chevy Silverado. Each has a V8 for the top engine. The Ram's is a 5.7-liter Hemi V8 making 395 horsepower and 410 pound-feet of torque. The Silverado will once again use a 6.2-liter V8 as its range topper with the same 420 horsepower and 460 pound-feet of torque as the current model. Both of these V8s boast some extra fuel saving technology. The Chevy's 6.2-liter (and some 5.3-liters) comes with the company's latest cylinder deactivation system that can shut off any or nearly all of the eight cylinders. The Ram's V8 boasts an optional 48-volt mild-hybrid system that, in addition to likely helping fuel economy, can provide up to 130 pound-feet of torque right off the line. With the Ram, fuel economy sees an improvement of 2 mpg in the city and combined ratings for 17 and 19 respectively. Highway fuel economy improves by 1 mpg to 23 with two-wheel drive and 22 with four-wheel drive. The Silverado's 6.2-liter V8 only improves city fuel economy by 1 mpg to 16, and actually loses 1 mpg on the highway. The new 5.3-liter engine with the fancy cylinder deactivation does see an improvement over the simpler version.

GM struggles to sell small cars, plans to lay off 2,084 employees at two plants

Due to low demand for some of its vehicles, General Motors plans to cut 2,084 jobs at its assembly plants in Lordstown, OH and Lansing, MI. At the same time, the automaker also announced plans to invest approximately $900 million in three of its facilities – the Toledo Transmission Operations in Ohio, Bedford Casting Operations in Indiana, and Lansing Grand River in Michigan - for future products. GM will discontinue the third shift at both the Lansing Grand River plant and the Lordstown, OH plant. The Cadillac ATS, Cadillac CTS, and Chevrolet Camaro are made at the automaker's plant in Michigan, which currently has 2,700 employees. The move to eliminate the third shift affects 810 hourly workers, as well as 29 salaried employees, starting on January 16th. The plant in Lordstown, OH currently has 4,500 employees and makes the Chevrolet Cruze sedan. The plan to discontinue the third shift will affect 43 salaried workers and 1,202 hourly employees and will start on January 23rd. As Fortune points out, sales of the Cruze are down 20 percent through October, while sales of the Cadillac ATS and CTS were down 17 percent through the same period of time. In addition to cutting the third shift at both assembly plants, the automaker plans to invest a total of $900 million between three of its facilities for unnamed future products. GM's Toledo Transmission Operations will receive $667.6 million, the Lansing Grand River Assembly plant will receive $211 million, and the automaker's Bedford Casting Operations will get $37 million. Last year, GM cut roughly 500 jobs from its Orion Township factory due to slow sales of the Chevrolet Sonic and Buick Verano, with surging crossover and SUV sales as the most likely culprit. With GM posting much healthier sales figures for the Chevrolet Equinox and Cadillac XT5 compared to the ATS, CTS, and Cruze, it looks like compact SUVs are to blame for this year's layoffs as well. Related Video: News Source: Fortune, General MotorsImage Credit: REUTERS / Rebecca Cook Hirings/Firings/Layoffs Plants/Manufacturing Cadillac Chevrolet GM Coupe Sedan Lordstown Ohio