1995 Chevrolet Impala Ss Sedan 4-door 5.7l on 2040-cars

Auto blog

The U-2 spy plane needs high-performance cars to help land

Typically, aircraft deploy their landing gear from three main points. Most military aircraft, for example, deploy two gears at the back and one forward, like a tricycle. Some civilian aircraft flip the layout, with two in front and one in back - tail-draggers. The U-2 Dragon Lady is wildly different than any of these. With a 103-foot wingspan but a body that's just 63-feet long, the layout of the U-2 makes a traditional landing setup infeasible. Instead, the U-2 utilizes a pair of wheels, one up front and one in back. With such a bizarre layout, landings are so tough that since the U-2's earliest flights at Area 51, the US Air Force has used high-performance chase cars to guide the pilot down safely. The landing process isn't over there, though. As this video from Sploid shows, balancing out the aircraft to fit the detachable "pogos" – think training wheels for spy planes – is a comical procedure requiring a number of airman using their full body weight to even out the U-2. This video also recaps some of the great vehicles that have served as chase vehicles for this legendary spy plane. They include Chevrolet El Caminos, and the Fox-body Ford Mustangs so favored by the California Highway Patrol. For the last several years, the USAF has utilized products from General Motors, using fourth-generation Chevy Camaros, before switching over to the Pontiac GTO and most recently, the awesome Pontiac G8. It's fair to say that if you're a gearhead in the Air Force, this is the job you want. Check out the video, embedded up top. News Source: Sploid via YouTubeImage Credit: Sploid Chevrolet Ford GM Pontiac Military Performance Videos

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Very first Chevy Camaro found and restored

Restoring an important classic car can lead people down rabbit hole upon rabbit hole of discovered history in a process that's essentially automotive genealogy. Take the recent rejuvenation of the very first Chevrolet Camaro as an example. The owners started with a strong hunch that the vehicle might be something special and spent years researching to figure it all out before the mechanical work even began. Fisher Body kicked off work on the first Camaro on May 17, 1966, and it was delivered to General Motors just a few days later for final assembly. While the model has earned a place as an American performance icon since then, the original was built more to develop the production process and boasted just a 230-cubic-inch (3.8-liter) inline six and 3-speed transmission. After spending its first few months appearing in promotions, a Chevy dealer in Oklahoma got the gold car in December of '66. It was touted on the sales floor there for years, and the first private owner didn't come until 1969. This short documentary goes into astonishingly comprehensive detail about every bit of the first Camaro's history. If you just want to hear the story of the latest owners and their work to get the vehicle restored since 2010, skip about 11 minutes into the video. Or, of course, you could just enjoy the whole thing. News Source: PilotCarRegistry via YouTube, Camaro NewsTip: Chris P. Chevrolet Automotive History Auto Repair Maintenance Coupe Classics Videos history