1964 Chevy Impala Ss on 2040-cars
National City, California, United States
Body Type:Coupe
Engine:350
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Interior Color: Red
Make: Chevrolet
Number of Cylinders: 8
Model: Impala
Trim: SS
Warranty: Vehicle does NOT have an existing warranty
Drive Type: RWD
Mileage: 63,000
Options: CD Player
Sub Model: SS
Exterior Color: Black
Up for sale is my 1964 Chevy Impala SS and it is a true Supersport. I have had this car for about 3 years now and just don't have the room for it. I am in no rush to sell it so if you know cars then you know what your buying. I built this car so I know what's in it and have all the reciepts to back it up. I understand you never get what you put in minus the time so this car will be sold to the highest bidder. The following is a description of what has been done:
ENGINE:
Rebuilt 350 CI (Less than 500 miles) with ported and polished camel hump heads.
2's and 1.6's with aluminum roller rockers.
Double roller timing chain with an HEI MSD ignition.
Mild upgrade on the cam and new crank with aluminum pistons.
It has long coated headers on it and duel Flowmaster exhaust.
650 CFM Edelbrock carburetor
4 Core Aluminum Radiator/ great for dispacing heat real quick. your car will never overheat!
TRANSMISSION:
700R4 Tranny with a new kick down cable, new Crossmember from Bowtie Overdrives, and new chrome dipstick.
Tranny is great for getting where you need to go without killing your engine. (4 Speed)
BRAKES:
Brand new Chrome 7" Brake Booster and Master Cylinder from ABS
Rear- New brake hardware, shoes, cylinders, lines and drums in the back.
Front- New Lowrider Disk Brake Kit from ABS Brakes that allow you to mount 13's if needed. New hoses and new wheel bearings in the front.
SUSPENSION:
Front end has been totally rebuilt from Tie Rods, Ball Joints, and all bushings. Everything is brand new. Front and rear also have new shocks.
INTERIOR:
Brand new interior kit from Classic Industries. This is the OG kit with no stitching and paid over $2,500 dollars to in include new foam and installation. All Door panels are brand new with all the moldings and carpet is new as well. Dash has been painted and speedometer bezel has be chromed. Console/ shifter and all major parts are all there.
I also have a tilt colum I haven't installed yet but I'll throw in the deal but that's if the deal is good.
ELECTRICAL:
Brand new wiring kit from American Autowire with new upgraded block fuses instead of the old glass fuses. Allows for more versatility when hooking up different things to your fuse panel. Car is completely rewired from headlight to tail light!
BODY AND PAINT:
Car is pretty straight. It was painted about a year ago and it's been in the garage ever since. No major damage on the body. The car has the OG green factory tinted glass and all windows are in perfect working condition. I have original bumpers front and back that have been rechromed. The grill and headlinght rings have been repolished to new. I have about 80% of the chrome that goes on the sides but there are a few pieces I still needed to get but that's no biggy. I just haven't had the time.
Like I said.....I'd hate to get rid of this car cause I am seriously invested in it with time and money! I hope to sell this car to a serious buyer who can finish it up. I'd love to see this car on the road doing some serious damage. One more thing.... this car has never been cut for hydros and I am the registered owner. Car tags are good through next February and I do have the title. If you have any questions my name is Gabriel and I can be reached at (619) 813-2239...... Car will be posted on Ebay as well so good luck and hope to hear from you soon. Thanks for all the responses so far....
Chevrolet Impala for Sale
2010 chevrolet chevy impala lt auto sedan 3.5l v6 no reserve auction ! nr !
2008 chevrolet impala ss sedan automatic engine, 5.3l small block v8(US $13,995.00)
1962 impala ss golden anniversary sport, coupe largely unrestored survivor!(US $36,900.00)
1971 chevrolet impala custom coupe, originally owned by racing driver aj foyt!(US $46,900.00)
1959 chevrolet impala base hardtop 2-door(US $2,000.00)
Power windows/locks/mirrors fresh tires stereo cd ice cold air auto lights clean
Auto Services in California
Zip Auto Glass Repair ★★★★★
Z D Motorsports ★★★★★
Young Automotive ★★★★★
XACT WINDOW TINTING & 3M CLEAR BRA PAINT PROTECTION ★★★★★
Woodland Hills Honda ★★★★★
West Valley Machine Shop ★★★★★
Auto blog
CA Chevy dealer allegedly adds $50K 'market value adjustment' to 2015 Z06
Fri, Jan 9 2015It seems to happen with every eagerly anticipated new car – dealerships, recognizing that crushing demand far outstrips the initial limited supply of a new model, inflate the price via a so-called "market value adjustment." We've seen it in the past with a number of new models, and now it's happening again with one of the Detroit 3's hottest vehicles. A dealership in Roseville, CA, outside of Sacramento, has allegedly attached a staggering $49,995 market value adjustment to a 2015 Corvette Z06. We say allegedly because, despite the evidence uncovered by BoostAddict, John L. Sullivan Chevy's online inventory listing doesn't display the price premium of the Z06 in question, a (normally) $93,965 model with the top-end 3LZ trim. It's unclear if either of the dealer's other Z06s, both 3LZs, one of which is in transit, will receive similar price adjustments. Now, legally, Sullivan Chevy isn't doing anything wrong here. Dealerships are under no obligation to observe a manufacturer's suggested retail price, a point General Motors' spokesperson Ryndee Carney pointed out to Autoblog via email. "For the Corvette Z06, Chevrolet has established a Manufacturer's Suggested Retail Price we feel is right for the market. Actual transaction prices, however, are the province of the dealer," Carney said, adding that a dealer zone manager will be discussing the price hike with the dealership. While we also reached out to the dealership over both the market value adjustment and the price of the Z06 as it appears on the company's website, we've yet to hear back as of this writing. Should they reply to our inquiries, we'll be sure to update you. Until then, we'd like to hear what you think about this case. Is Sullivan Chevy simply pricing the cars as high as it thinks the market can bear, or is this a cash grab for an hotly anticipated product? Have your say in Comments.
GM's Oshawa plant may close after Camaro production moves
Sat, Feb 7 2015Most of the time, when vehicle production is moved from one assembly plant to another, it spells bad news for the former. While General Motors won't go so far as to say its Oshawa, Ontario factory, which is losing the Chevrolet Camaro to the Lansing Grand River plant, is in trouble, analysts seem to think the factory's days are numbered. Forecasts for the facility are far from positive. The loss of the Camaro this year, combined with GM's targeted shutdown of a single-shift assembly line responsible for the fleet-only Chevy Impala Limited and the Equinox crossover is a bad enough omen. But with AutoForecast Solutions CEO Joe McCabe telling The Detroit News that the plant's other two products, the Cadillac XTS and Buick Regal, aren't likely to stick around beyond 2017, things look decidedly grim at Oshawa. "There is a fairly strong chance that the plant could close," Jeff Schuster, senior VP of forecasting for LMC Automotive, told The Detroit News. That doesn't mean that Unifor, Canada's auto union, and the Canadian government are going to let the factory die without a fight. And with the latter chipping in $10 billion as part of GM's 2009 bailout, you might think it has a degree of leverage in the situation. A meeting between the government and the Detroit Three at the 2015 North American International Auto Show revealed that Oshawa is already a topic of conversation. "We made it very clear that we would like to see an indication on the future of Oshawa sooner, in particular because the timing is very challenging for our supply chain to be able to adjust to potentially future orders or changes, but also to know that there are going to be future opportunities at Oshawa," Ontario's Minister of Economic, Development, Employment and Infrastructure Brad Duguid told The Detroit News. "Bottom line: It's time they made a longer-term commitment here," Unifor President Jerry Dias said, echoing Duguid's statements. It's unclear if this sort of strong talk will be enough to save 3,300-plus employees, although based on the analysts' forecasts, we doubt it.
Corvette Z06 and Viper TA square off at the strip
Wed, Jan 21 2015There are many long-standing grudge matches among automobiles: 911 vs GT-R, Mustang vs Camaro, Ferrari vs Lamborghini... but as far as high-end American metal goes, it doesn't get much more legendary than Viper vs 'Vette. So after Chevy released the new Corvette Z06, we knew it was only a matter of time before it would have to square off against the Viper TA. And what better place to pit these two parallel pillars of American performance than on the drag strip? Fortunately that's just what we have here. In one corner, the 2014 Dodge Viper TA, with its 8.4-liter V10 pumping out 640 horsepower and 600 pound-feet of torque. In the other, the 2015 Chevrolet Corvette Z06, the supercharger on its 6.2-liter V8 more than making up for the discrepancy in displacement and cylinder count to produce 650 hp and just as much torque. But numbers don't tell the whole story, so watch the video clip to see which reaches the end of the quarter-mile first. News Source: To the Floor via YouTubeTip: James Chevrolet Dodge Videos drag race chevy corvette z06 quarter mile drag strip srt viper ta