2011 Chevrolet Hhr Fwd 4dr Lt on 2040-cars

Auto blog

GM recalls 3,300 pickups and SUVs for new ignition-switch issue [UPDATE]

UPDATE: A statement from GM about the recall has been added below. The exact total of vehicles affected is 3,296, including 3,073 of them in the US. General Motors isn't letting an ignition-switch problem grow into a massive scandal again. The automaker is recalling about 3,300 North American trucks and SUVs. They are: the 2014 Chevrolet Silverado and GMC Sierra and the 2015 Chevy Suburban and Chevy Tahoe, as well as 2015 model heavy-duty pickups, the Detroit News reports, citing an Associated Press story. The issue appears to have been caught fairly quickly. In this case, the keys can get stuck in the "start" position and then slip to "accessory" if bumped. This is because the ignition lock gears have an outer diameter that's larger than the specifications allow. When that happens the engine shuts off, and the driver loses assistance to the steering and brakes. The airbags might also be affected. The vehicles get a new ignition-lock housing to fix the problem. According to the Detroit News, an employee who experienced the problem with the switch discovered the issue, and this person then let officials at the automaker know as part of the Speak Up for Safety program. A total of five reports of the fault were discovered. However, there are no cases of injuries or crashes. The claims to the automaker's resolution program eventually tallied that GM's previous ignition switch problem included 124 deaths and 275 injuries. The company also had to recall millions of vehicles and pay significant fines to the US government. GM Statement General Motors is recalling 3,073 full-size trucks from the 2014 and 2015 model years in the U.S. Some of these vehicles may have an ignition lock actuator gear with an outer diameter that exceeds specifications, which may make turning the ignition key difficult. The ignition key could get stuck in the "start" position. This may be more likely at higher interior ambient temperatures. If the vehicle is driven with the key stuck in the "start" position, and the vehicle experiences a significant jarring event or the vehicle's interior temperature cools, the ignition lock cylinder could move out of the "start" position, rotate past the "run" position, and move into the "accessory" position, leading to loss of power steering assist, power brakes and potentially air bag deployment in certain crashes. Dealers will replace the ignition lock housing.

Stop-start standard in four-cylinder 2015 Chevrolet Impala

Chevrolet has announced that it will include stop-start technology as standard in the entry level 2015 Impala. The result is a nearly five-percent improvement in city fuel economy, also known as one mile per gallon, up to 25 mpg, combined. The 3.6-liter V-6 Impala will not feature stop-start. The 2015 Impala comes equipped with Chevrolet's 2.5-liter Ecotec four-cylinder engine, which will also offer 22 mpg in the city, and 31 on the highway. The 3.6-liter V-6 Impala will not feature stop-start and the mild-hybrid eAssist model from the 2014 MY, which got 29/25/35 combined/city/highway mpg, has been discontinued. Chevrolet spokesman Chad Lyons told Green Car Reports that not even one percent of the 2014 Impalas purchased were the Eco model. So Chevy is trying something different. With a seamless driving experience in mind, the new Impala's stop-start tech features software that governs under what conditions the feature will activate. The engine won't shut off if the car has not reached a speed of six miles per hour, so the start-stop won't be cycling during traffic jams. It can also fire the starter even if the engine has not come to a full stop, which quickens reaction time, particularly in instances of what Chevrolet calls "change-of-mind events." The stop-start function uses information about cabin temperature and humidity as well as battery charge to help determine whether or not to shut off the engine. The 2015 Impala has been engineered to reduce NVH, which will also help create a smoother stop-start experience for occupants, Chevy says. Motor mounts have been updated, and a burlier starter motor will help restart the engine after a stop. The Impala follows the 2014 Malibu as Chevrolet's second vehicle to feature stop-start tech. The four-cylinder model currently makes up over 30 percent of Impala sales. The 2015 Impala will be available beginning this summer, with a base MSRP of $27,735 (including destination charges). And while one MPG isn't a huge difference, neither is the price increase of just $50 for a bit of eco-minded innovation. Read on for more details in the press release below. Chevrolet Makes Stop/Start Standard in 2015 Impala Technology improves city fuel economy by 5 percent 2014-05-22 DETROIT – Stop/start technology will be standard on the 2015 Impala base 2.5-liter ECOTEC® engine, an addition that improves the vehicle's city fuel economy by nearly 5 percent, or one mile per gallon.

Pure Vision Design TT Camaro has 1,400 reasons to want it

We've talked about Pure Vision Design before, a California-based company that made waves at last year's SEMA show with its Martini-liveried, Indy-car-powered Ford Mustang. That same car later starred in a Petrolicious video we showed you just a few weeks back. The company's latest creation is a menacing car it calls the Pure Vision Design TT Camaro. Based on a 1972 model, this car shares the Martini Mustang's clean styling and obsession with details.
Unlike the Mustang, which draws its power from a mid-60s Lotus-Ford Indycar engine, the "TT" in this Camaro's name implies something far more potent. The Nelson Racing Engines 427-cubic-inch V8 has been fitted with a pair of turbochargers, with a claimed output of 1,400 horsepower. That's almost 1,000 more than the Martini Mustang.
A six-speed Magnum transmission dispatches that power to the ground, while Pirelli PZero tires are tasked with (somehow) trying to grip the road. Baer brakes hide behind those HRE rims, while JRI coilovers and HyperTech springs bless the Camaro with some degree of competency in the bends.