1996 Chevrolet Express 1500 Ls Standard Passenger Van 3-door 5.7l on 2040-cars

Auto blog

Bob Lutz builds the case for a mid-engined Corvette

Rumors of a mid-engine Corvette are like automotive industry folklore at this point. Every once in a while, news pops up that it might be happening or is under development, but nothing actually ever comes to fruition as something people can actually buy. The latest spy shots strongly suggest a mid-engine 'Vette is in the cards, yet again, possibly for 2018. Now, an op ed by former General Motors executive (and definite performance car fan) Bob Lutz in Road & Track gives the inside scoop on the history of one of these proposals and lays out how to make it happen today. According to Lutz, the company's engineers believed the C6 ZR1 was at the limit for front-engine, rear-wheel drive performance in that package, and the only solution was to move the powerplant behind the driver. Lutz even got then CEO Rick Wagoner on board. The scheme made it at least as far as clay models for mid-engine versions of the 'Vette and Cadillac XLR. Eventually, a lack of money got in the way, though, bringing the project to an end. Lutz puts a lot of faith in GM's current leaders, especially Mary Barra and Mark Reuss. He thinks the chances of a mid-engine 'Vette happening this time are better than 50 percent. The model, rumored to be named Zora, could offer over 700 horsepower in an ultra lightweight body and be priced at about $120,000 to "suck the doors off everybody." Head over to Road & Track to get some insights from this highly respected and entertaining auto industry veteran. Related Video:

Two More Recalls Push GM Total To 4.8 Million In A Month

General Motors announced two more recalls late Friday, bringing to 4.8 million the number of cars, trucks and SUVs the automaker has called back for repairs in the past month. The string of recalls, topped by an ignition switch problem in compact cars now linked to 13 crash deaths, has embarrassed the company and sidetracked its new CEO, who started work just over two months ago. GM has admitted knowing about the switch problem a decade ago, yet it didn't recall any cars until February. The recall delay has brought two congressional investigations and probes by the Justice Department and the National Highway Traffic Safety Administration. Late Friday night, GM announced it would recall 490,000 late-model pickup trucks and SUVs because transmission oil cooling lines weren't secured properly in their fittings. Transmission oil can leak from a fitting and hit hot surfaces, causing fires, the company said in a statement. GM said it knows of three fires and no injuries. The recall affects Chevrolet Silverado and GMC Sierra 1500 pickup trucks from the 2014 model year, as well as 2015 Chevrolet Suburban and Tahoe SUVs and the GMC Yukon and Yukon XL SUVs. All have six-speed automatic transmissions. The Silverado is GM's top-selling vehicle and an important profit center for the company. The GMC Sierra also is among GM's top sellers. Dealers will inspect the transmission oil cooling line fittings and make sure they're securely seated, at no cost to owners. Also Friday night, GM announced the recall of 172,000 Chevrolet Cruze compact cars because the right front axle shaft can fracture and separate while being driven. The recall affects cars from the 2013 and 2014 model years equipped with 1.4-liter turbocharged four-cylinder gasoline engines. If a shaft fractures, the wheels would lose power without warning and the cars would coast to a stop. GM says it has warranty reports of several dozen shaft fractures. It is not aware of any crashes or injuries. Dealers will replace the shafts free of charge. The recall allows dealers to resume selling affected Cruzes. GM issued a stop sale order on the cars Thursday night. The recall also covers about 2,500 replacement shafts used to fix manual transmission Cruzes that were recalled last September. In all, GM has recalled 4.8 million vehicles since last month, two million more than the company sold last year in the U.S.

How GM engineers are using diaper 'snow' to keep you warm

Testing how snow affects General Motors' vehicles isn't really a problem right now for the company's engineers, but in the dog days of summer the process isn't exactly easy. The only real option is for them to book time at the automaker's climatic wind tunnel. However, a flash of brilliance from an engineer allows snow to be simulated regardless of the temperature outside, and the discovery is all because of his daughter's wet diaper. The realization came to GM Thermal Systems engineer Nicholas Jahn while he was swimming with his daughter and noticed how her diaper ballooned in size in the water. He found out the substance that makes this possible is called sodium polyacrylate. When the material gets wet it grows and forms fluffy flakes that are a close imitation of snow. Best of all, the stuff can be prepared easily any time of the year, and it's reusable. The engineering team uses the material to test the effectiveness of the heating systems of GM's vehicles. They spread the sodium polyacrylate over the inlets at the base of the windshield to obstruct the airflow and then crank the heater. After some time, they can see how much is being sucked into the system and design more efficient systems in the future. See how the process works in the video above and read about the diaper discovery in GM's press release below. Diapers Change Chevy Cruze Winter Warm-up Time GM validation engineer uses diaper material "snow" to reduce frigid drives 2015-01-06 DETROIT – An item commonly found on an infant's changing table is helping General Motors' engineers simulate snow year round, ensuring heating systems in cars like the 2015 Chevrolet Cruze can quickly and efficiently warm its interior. Packed snow can prevent air from entering the inlet panel at the bottom of the windshield, obstructing the flow of air into the heating system and reducing the amount of air it can push out. This can lead to less efficient warming of the car's interior and windshield defrosting. "The last thing anyone wants to do when it's freezing cold out is scrape their windshield," said Nicholas Jahn, GM Vehicle Thermal Systems engineer. "The testing we perform on the Chevrolet Cruze with the diaper material allows us to maximize the car's heating capabilities." Ironically, Jahn stumbled upon his diaper-based testing method in the middle of summer. During a swim with his daughter, he noticed her diaper multiplied in size when it came into contact with water.