04 Chevy Express 1500 Regency Conversion Tv High Top on 2040-cars

Auto blog

Ford also working on 200-mile EV to compete with Bolt, Model 3

The Chevrolet Bolt is on a lot of people's radars. You may have even noticed friends and colleagues who harbor very little interest in the automotive world, or anything labeled as "green," who have taken notice of a 200-mile electric vehicle coming out of Detroit. Mass appeal is the idea, after all. You can include Ford in the list of interested parties, in this case with the intention of taking direct aim at the Bolt – and, by proxy, the Tesla Model 3 – with an affordable, long-range EV of its own. Ford will unveil its own long-range EV, positioned to compete with Chevrolet, later this year, according to Automobile. Details are very scarce about Ford's plans, but we do know that the Bolt (or whatever the Chevy all-electric hatchback will end up being called) is expected to offer over 200 miles of driving between charges, with a sticker price around $30,000. The other major player, of course, is Tesla's smaller, more affordable sibling to the Model S. The Model 3, also slated to go on sale in 2017, should cost less than $40,000. While Tesla has established itself in the EV world, another long-range EV out of Detroit would win some customers from the California-based startup. For now, though, we'll just have to wait, as Ford remains tight-lipped about its plans for the car. Automobile predicts a possible unveiling at the Los Angeles Auto Show in November, what with California's EV mandate being a driver of strategy for various automakers. Most can agree, though, that a larger field of options – while not ideal for backers of the Bolt or Model 3 – will only benefit the car-buying public. Related Video: Featured Gallery Chevrolet Bolt EV Concept: Detroit 2015 Related Gallery Chevrolet Bolt EV Concept News Source: AutomobileImage Credit: Copyright 2015 Sebastian Blanco / AOL Green Rumormill Chevrolet Ford Tesla Electric Future Vehicles Chevy Bolt ford ev

Driving Granatelli's turbine-powered 1978 Chevy Corvette [w/video]

With its curvy snout and feminine haunches, the third-gen Chevrolet Corvette looks like a dreamy – if dated – exemplar of Sports Car Fantasy 101 when viewed through modern eyes. This particular specimen circa '78, clad in silver and black paint with red pinstripes, appears to be a well-preserved example from the era. Apart from its low-profile Pirellis, slightly raised and slotted hood, spacious stance and a certain hand-painted descriptor alongside its crossed flag logos, you'd never guess there's a Space-Age propulsion unit powering this Coke bottle-bodied ride. Climb inside, and you're presented with aircraft gauges and big, colorful square buttons in the center panel. It takes a push of the "Ignitor" button, a tap of the starter button, and a slide of a T-handle for this nearly 40-year-old sports car to start sounding like Gulfstream G650 ready for takeoff. Yep, you're sitting in an 880-horsepower, turbine-powered Corvette, the only one of its kind in the world. Welcome to the whoosh. What The...? Built by Vince Granatelli, son of Indy 500 guru Andy Granatelli, this curious Corvette came into being by cramming a Pratt & Whitney ST6N-74 gas turbine engine into the donor car's lengthy front end. The same type of Jet A-burning mill powered Granatelli Senior's STP-sponsored racecar at the 1967 Indianapolis 500, where it famously led most of the 198 of 200 laps until a $6 transmission bearing failed, knocking it out of the race. The idea of turbine power usurping internal combustion was so threatening that Indy's governing body restricted turbine performance into obsolescence thereafter. A turbine-powered Corvette sounds excessive because it is. But there are also things about this 880-horsepower, 1,161-pound-feet monster that might surprise you. While it smacks of futurist exoticism and cost a then-dizzying $37,000 in 1967, the Canadian-built powerplant uses 80 percent fewer parts than an internal combustion V8 and will run on virtually anything combustible – whiskey, diesel, even Chanel No. 5. Though it's triple the length of a V8, the Pratt & Whitney beast weighs only 285 pounds. It's also one hell of a robust workhorse, typically serving as an auxiliary power unit for commercial aircraft or a generator in oil fields, where it can run for tens of thousands of consecutive hours before needing an overhaul. To adapt the Chevrolet for jet duty, the nose section was gutted and a sub-frame was built to compensate for the loosey-goosey front end.

Chevy Crossvolt name kept alive in new trademark application

In April 2011 General Motors submitted a trademark application with the US Patent and Trademark Office for the word "Crossvolt." In November of this year, the application expired for lack of a statement of use. But in August of this year, GM applied again for the same trademark, leading some to believe that it intends to apply the name to a vehicle. That vehicle could explain the mule in sliced-and-diced Chevrolet Orlando bodywork caught in several spy shots this year, theorized to be some kind of Toyota Prius V or Ford C-Max Hybrid competitor; or it could be a production version of the Chevrolet Volt MP5 concept showed off at the Beijing Motor Show in 2010, which was about the same size as the Chevy Orlando. Or it could be none of those things – but the fact that Chevrolet is keeping it current makes us believe it will be... something. Featured Gallery Beijing 2010: Chevrolet Volt MPV5 concept View 13 Photos News Source: Fox News, Trademarkia Green Chevrolet GM Crossover Hybrid trademark uspto