2014 Chevrolet Equinox Ls on 2040-cars

Auto blog

GM finds steering flaw, decides it doesn't warrant a recall

Guess what? General Motors is back in the spotlight for not recalling something. This time, though, not only does the company have an argument against a recall campaign, but its position is supported by the National Highway Traffic Safety Administration. According to The New York Times, over 50 owners of GM vehicles have reported instances of stuck or seized steering after driving long distances without moving the wheel. One owner complained to NHTSA that the "locked" steering of their 2013 Buick Verano caused a collision with a concrete barrier in a construction zone. Along with the 2013 to 2014 model year Verano sedans, Chevrolet Cruze and Malibu sedans are also affected. Considering the popularity of those models, GM needs to have a reason for not issuing a recall, right? "Based on a very low rate of occurrence – ranging from less than one half to less than two incidents per thousand vehicles – and the fact that the condition is remedied when the wheel is turned, GM determined this was not a safety issue," spokesman Alan Adler told The Times. The company has, however, issued a technical service bulletin for owners that complain of the problem. The fix is nothing more than a software update that is covered for 10 years or 150,000 miles from new. NHTSA cited GM's actions, along with descriptions of the problems from customers, in its decision not to issue a recall, with spokeswoman Catherine Howden saying, "the symptoms described would be a brief, perceptible change in steering feel that has little to no effect on the driver's ability to safely steer the vehicle." "When terms like 'notchy,' 'stick,' 'slip' or 'feel' are used, it does not indicate a meaningful increase in steering effort," Howden told The Times via email. What do you think? Is GM in the wrong here? Should there be a recall, or is the issue so limited as to not warrant one? Have your say in Comments. Featured Gallery 2013 Buick Verano Turbo: Review View 20 Photos Related Gallery 2014 Chevrolet Malibu: First Drive View 36 Photos Related Gallery 2014 Chevrolet Cruze Turbo Diesel: Quick Spin View 14 Photos News Source: The New York TimesImage Credit: Copyright 2015 Steven J. Ewing, Seyth Miersma / AOL Government/Legal Recalls Buick Chevrolet GM Safety Sedan buick verano

Performance cars overpower the Detroit Auto Show

At precisely the stroke of noon on Monday, the 2016 Acura NSX rolled on stage at the Detroit Auto Show amid plumes of smoke and dancing lights. The sounds of the powerful engine revving soared to the rafters. It was the second coming of Acura's iconic sports car, and the reveal had all of the expected trappings. Afterwards, champagne corks popped and the bubbly flowed. It was noon in Detroit, but for the green-car movement, it seemed like the clock had struck midnight. That's an exaggeration, but performance was the overwhelming theme of North America's most important show. Ford – which has helped lead the way in smaller displacement engines and early adoption of hybrid powertrains – had more than 1,500 horsepower on stage one point after it revealed the GT concept, the new F-150 Raptor and the Shelby Mustang GT350R. The NSX is technically a hybrid (it has three electric motors), but with 550-plus hp, there's no doubt this Acura was bred on the track. The theme continued throughout the show at nearly every stand. Alfa Romeo showed off the 4C Spider, which is the open-air version of a car that purports to be the spiritual successor of the high-performance 33 Stradale from 1967. On Tuesday, Cadillac is scheduled to reveal the 640-hp CTS-V with the V8 transplanted from the Corvette Z06, and the Lexus was expected to roll out its own V8-powered beast, the 467-hp GS F. For enthusiasts – especially enthusiasts with money – these are halcyon days. But make no mistake, all of this power has a purpose. Ford product chief Raj Nair said the Blue Oval uses high performance cars to develop technologies, like aerodynamics and materials, which are then shared across its lineup. "It's another proof point about how serious we are in developing innovation through performance," he said. Ford, which is rolling out at least 12 performance cars by 2020, said the sporty cars attract younger and more influential buyers to its fold, which can help burnish its image beyond adding sales volume. Toyota is taking a similar approach, senior vice president Bob Carter said, noting the Lexus RC coupe draws people into showrooms and gets them excited about the brand, even if they don't end up buying one. "They provide an aspiration and a halo that provides the attention that gets you noticed in a cluttered market," he said.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck