2014 Chevrolet Equinox Ls on 2040-cars

Auto blog

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

Diesel details: Comparing Ram 1500 EcoDiesel, Chevy Silverado Duramax, Ford F-150 Powerstroke

With specifications for the 2019 Ford F-150 Power Stroke diesel already out, and the details on the 2020 Ram 1500 EcoDiesel and Chevy Silverado Duramax (and its GMC Sierra twin) trickling out, we felt it was a good time to start comparing the full-size trucks' light-duty diesels. Bear in mind, we've only driven one of these new diesel trucks, so we'll be sticking to numbers for now. Some numbers haven't been announced yet, either, but stay tuned, because we'll be updating this post with additional specifications as they become available. And if you want to compare any other versions of these trucks with other vehicles, be sure to check out our comparison tool. Now let's start comparing, starting with our big chart of numbers below. As we can plainly see, these trucks are quite closely matched. Each one has six cylinders, a displacement of 3.0 liters and a turbocharger to boost it. The output of each is somewhat close, too. The Ram 1500 EcoDiesel is the torque king at 480 pound-feet, 20 more than the GM trucks and 40 more than the Ford. The GM trucks win on power, though, with 277 ponies, 17 more than the Ram, and 27 more than the Ford. GM does report that you get their trucks' peak 460 pound-feet of torque from 1,500 rpm to 3,000 rpm, whereas the others only report peak torque at a particular point in the rev band, but all of these trucks should have wide, flat torque curves as you would expect from modern turbodiesels. 2020 Ram 1500 EcoDiesel View 8 Photos Engine output is only one part of the truck performance equation. We also have towing and payload capacity, as well as fuel economy. With towing, the Ram 1500 is the current leader with a maximum capacity of 12,560 pounds. That tops the Ford F-150's 11,400-pound tow rating by well over 1,000 pounds. The F-150 can carry 2,020 pounds in its bed, but we don't know yet whether that's better or worse than the Ram or the GM trucks. We also don't have numbers for the GM trucks' towing capacities. View 9 Photos As for fuel economy, the Ford F-150 manages a thoroughly impressive 22 mpg in the city and 30 on the highway with two-wheel drive. Choosing four-wheel drive drops those numbers to 20 and 25 respectively. The fuel economy numbers for the Ram, Chevy and GMC haven't been revealed yet, but for some comparison, we can look at the old Ram EcoDiesel. That truck's best fuel economy was 20 in the city and 27 on the highway with two-wheel drive.

Porsche wins the 2015 24 Hours of Le Mans

The question going into this year's 24 Hours of Le Mans was whether or not the Porsche 919 Hybrid would be able to combine its qualifying pace with race reliability. After battling neck-and-neck with Audi's R18 for most of the race, the answer is a resounding yes. Not only did Porsche drivers climb the first two spots on the podium, they did so without any major mishaps on track. This win is the first overall trophy for Porsche since 1998. Audi previously won the last five races, and 13 of the last 15. Corvette also returned to the winner's circle, with the No. 64 C7.R taking winning the GTE Pro division. The victory is the first class win for Corvette since 2011. KCMG won the LMP2 class in ninth overall. With 45 minutes to go the No. 98 Aston Martin crashed out of first place in GTE Amateur, giving the class win to SMP Racing's Ferrari and second place to the Patrick Dempsey Racing Porsche 911 RSR. For the full list of official results, click here. The GTE Pro class proved to be just as exciting as the P1 class, with a four-way battle for first after four hours into the race. For most of the race, the battle at the top went back and forth between the two German manufacturers. An tire puncture in the No. 7 Audi gave up the lead to Porsche, and moments later a crash forced the No. 8 into the garage. But a three-minute replacement of the front and rear bodywork kept the Audi in contention. As the race wore into the night, Porsche maintained a slightly faster pace than Audi. Nick Tandy took the lead on Lap 253 early Sunday morning, and car No. 19 never gave up the top position. The win is the first for all three drivers of the No. 19 – Nico Hulkenberg, Earl Bamber, and Nick Tandy. A lap behind in second was the No. 17 Porsche. The Audis fought reliability problems late in the race but still finished third with the No. 7 R18. The GTE Pro class proved to be just as exciting as the P1 class, with a four-way battle for first after four hours into the race. As the Aston Martin cars dropped away, the lone Corvette Racing entry took over, followed by a charging AF Corse team Ferrari 458 Italia. The Corvette and Ferrari continued to trade places in the final hours until gearbox trouble forced the No. 51 Ferrari out of contention. It was eventually passed by the other AF Corse car, No. 71. Nissan experienced all the pain of a first-year effort with its front-wheel-drive GT-R LM Nismo.