2008 Chevy Equinox Lt 3.4l V6 Cruise Control Only 36k Texas Direct Auto on 2040-cars

Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

GM recalls 64k 2011-2013 Volts over carbon monoxide fears, stop sale on Trax and Encore

General Motors is recalling 50,249 Chevrolet Volts from the 2011-2013 model years in the US and an additional 13,937 exported examples because of fears over carbon monoxide buildup. According to a statement, if a Volt is accidentally left on while running on electric power, its internal combustion engine would eventually kick on to charge on the battery. If this happens in an enclosed space, then carbon monoxide can fill the area, leading to a potential exposure to the dangerous gas. According to GM, there have been two injuries reported due to this issue. To fix the problem, there's a software update to limit the time the vehicle can idle. According to Automotive News, GM is also issuing a stop sale on about 2,300 examples of the 2015 Chevrolet Trax and Buick Encore. In these compact crossovers, it's possible that the steering column assembly could touch the power steering circuit board and cause damage over time. This could potentially cause the system to stop working. Automotive News indicates that the automaker is still working with the supplier to get the necessary parts to repair this problem. General Motors is recalling 50,249 Chevrolet Volts in the U.S. from the 2011-2013 model years to implement a software update that will limit the amount of time a vehicle can be left idling in the "on" or "run" position. If a driver exits the vehicle and inadvertently leaves the vehicle "on" by failing to react to cues and warning chimes emitted by the vehicle, the vehicle's high-voltage battery will drain after a period of time and the gasoline engine will begin to run. If the gas engine runs for a long period of time within an enclosed space, such as a garage, carbon monoxide could build up. GM is aware of two injuries, both related to carbon monoxide build up. The total recall population including Canada and exports is 64,186. Related Video:

GM will make Chevy Volt production announcement tomorrow

Thing are apparently happening to get the next-generation Chevy Volt ready for public consumption. The most obvious proof is in a preview of an announcement (possibly coming tomorrow) that the two main places where General Motors gets the Volt ready -the Detroit-Hamtramck Assembly Plant and the Brownstown Township battery assembly facility - will be getting big money upgrades and lots of new positions. The Hamtramck plant builds the Volt and its fancier cousin, the Cadillac ELR, as well as the global versions of the Volt. The Detroit News reports that GM will add 1,400 jobs and spend roughly $450 million at the two locations in order to build the redesigned Volt. What's less clear is exactly what the updates will bring us. We've heard that the new volt will be a 2016 model and come on a new chassis. Speculation in The Detroit News about tomorrow's announcement runs the gamut from a new compact PHEV with less electric range and a lower price (which makes sense) to an updated Volt with more electric range (heard it before) to a new all-electric vehicle (the moon shot). If there's any hints to be gleaned in the international Volts, there are also reports coming in that the Opel brand will get an all-electric vehicle that is cheaper than the Ampera. Read into that what you will. We pestered GM's Kevin Kelly on the new Volt (again) and he said (again) that he couldn't give out any more detail other than what's been reported. He just told AutoblogGreen that there will be an announcement tomorrow and that it will be about the Hamtramck and Brownstown facilities and involve the Volt. So, stay tuned.