1967 Chevy El Camino on 2040-cars

Auto blog

CNG-powered Chevy Sonic, Cruze headed your way

The value proposition for a Crazy Diamond Performance CNG ride was a little bit better before gas prices took a dive in the past month. Still, the Michigan-based company, which converts some of Chevrolet's compact vehicles to run on compressed natural gas, received approval late last month from the US Environmental Protection Agency (EPA) for two of its conversion models. And CNG is still pretty cheap. Crazy Diamond will start selling CNG versions of both the Chevrolet Cruze and Chevrolet Sonic. The startup will target fleet operators looking to cut both refueling costs and their carbon footprint. CNG can be found in much of the country in the low $2 range, while the average CO2 emissions are about 25 percent less than those of similar gas-powered vehicles. Average gas prices have tumbled by more than 30 cents a gallon in the last month, according to AAA, but they're still at close to $3. The two models will be able to go almost 300 miles on a full tank of CNG. Crazy Diamond said this summer that it would start selling converted a CNG-powered Cruze that delivers 130 horsepower for as low as $26,000. The turbocharged version goes for about $28,000. Take a look at Crazy Diamond Performance's celebratory press release below. Crazy Diamond Performance recieves EPA approval on its CNG Cruze and Sonic CDP receives EPA approval for its Mono-Fuel CNG Cruze and Sonic. Shelby Township, Michigan, October 30, 2014– Crazy Diamond Performance (CDP) receives EPA approval on its Mono-Fuel Compressed Natural Gas (CNG) Chevrolet Cruze and Chevrolet Sonic. Crazy Diamond Performance has received EPA approval on two new mono-fuel small passenger vehicles, the CNG Chevrolet Cruze and CNG Chevrolet Sonic. These new mono-fuel CNG platforms are the first of a series of small and fuel efficient vehicles coming from CDP, where cost, low emissions and reduced fuel consumption is important for not only fleet owners, but to the general public as well. "Soon to be available, are the 1.8L and 1.4L Cruze and Sonic CNG retrofit systems. These two vehicles represent a change in the status quo, with an OEM level integration of the fuel system and its components" states Michelle Fern, Executive Vice President CDP Inc. These vehicles provide flexibility for fleets looking to purchase a domestic small mono-fuel passenger sedan, but have not had an option until now. There are significant emissions benefits over its gasoline counterpart, with an average reduction in Carbon Dioxide (CO2) of 25%.

GM follows up Lambda CUV stop-sale with tire recall

In late January, General Motors announced a stop-sale for about 6,281 examples of the 2015 Chevrolet Traverse, GMC Acadia and Buick Enclave because of the possibility for the treads cracking on their 18-inch Goodyear Fortera HL tires. At the time, GM said that this would also eventually lead to a safety campaign to repair the problem, and the National Highway Traffic Safety Administration has just published those details. GM's recall covers 5,876 of the three Lambda platform crossovers to replace their tires. According to NHTSA, if the treads crack, there could be a loss of pressure and possible failure. Goodyear already announced its own recall of the tires after internal testing found small tread cracks. The company did not believe this was safety issue, but the problem did put the rubber out of compliance with federal laws. The business's safety campaign covered an estimated 48,512 tires. Of those, around 32,000 were reportedly made for GM to either be fitted to vehicles or sold as replacements. The remainder went to the aftermarket. Goodyear's portion of the recall is expected to begin around February 20. RECALL Subject : Tire Tread Cracking/FMVSS 110 Report Receipt Date: JAN 28, 2015 NHTSA Campaign Number: 15V044000 Component(s): TIRES Potential Number of Units Affected: 5,876 All Products Associated with this Recall Vehicle Make Model Model Year(s) BUICK ENCLAVE 2015 CHEVROLET TRAVERSE 2015 GMC ACADIA 2015 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Buick Enclave vehicles manufactured December 9, 2014, to January 14, 2015, 2015 Chevrolet Traverse vehicles manufactured December 9, 2014, to January 20, 2015, and 2015 GMC Acadia vehicles manufactured December 9, 2014, to January 16, 2015, and all equipped with Goodyear P255/65R18 Fortera HL tires. These vehicles are equipped with tires that may experience tread cracking. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 110, "Tire Selection and Rims and Motor Home/Recreation Vehicle Trailer Load Carrying Capacity Information for Motor Vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or Less." CONSEQUENCE: If the tire treads crack, a loss of tire pressure and possible tire failure may result, increasing the risk of a crash. REMEDY: GM will notify owners, and dealers will replace the tires that were manufactured within a specific date range, free of charge.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck