1992 - Chevrolet Corvette on 2040-cars

Auto blog

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

Weekly Recap: GM plans massive new paint shop at Chevy Corvette factory

General Motors is laying out some serious green to maintain the Chevy Corvette's expansive color palette. The automaker is breaking ground on a new paint shop this summer that's part of a $439-million investment to upgrade the 34-year-old Bowling Green, KY, factory that builds the Stingray. The massive new structure will total 450,000 square feet, nearly half the size of the current 1-million square-foot facility. Construction is expected to take two years and won't impact Corvette production. The upgrades include new robots that save paint and create a better finish, longer, more efficient ovens to bake in the finish, and LED lighting. There's also a dry scrubbing booth technology with a limestone handling system that eliminates waste. GM has invested $135 million in the factory in last four years for the changeover to build the C7 and to relocate its Performance Build Center to Bowling Green. The improvements continue to modernize the Kentucky factory, which has become a tourist attraction in its own right, as more than 56,000 enthusiasts visited it last year. The upgrades are part of a $5.4-billion investment GM confirmed in April that will remake its US footprint in the next three years. The Bowling Green expansion underscores GM's continued commitment to the Corvette, which sold nearly 38,000 copies around the world last year, an eight-year high. "With this major technology investment, we can continue to exceed the expectations of sports car buyers for years to come," North American manufacturing manager Arvin Jones said in a statement. OTHER NEWS & NOTES Takata recall hits 34 million vehicles The National Highway Traffic Safety Administration expanded the Takata airbag recall to an almost unthinkable 34 million vehicles on Tuesday. The recall is part of an agreement reached by the two sides where Takata admitted some of its airbag inflators have a defect, and the deal compels the company to comply with all future regulatory actions and investigations. Takata's airbag inflators were produced with "a propellant that can degrade over time" and lead to ruptures, NHTSA said. Six deaths have been attributed to the flaw worldwide. Investigations conducted by Takata, automakers, and others have not determined the exact cause of the inflator problem, but NHTSA said moisture appears to alter the propellant's chemical structure. It then ignites too rapidly, creates too much pressure that ruptures the inflator, and blasts shards of metal at passengers.

Cadillac CT6 production ceases January 2020 as part of D-Ham layoffs

General Motors filed paperwork under the Worker Adjustment and Retraining Notification Act with Michigan's Department of Labor and Economic Opportunity this week, detailing events to come at the automaker's Detroit-Hamtramck Assembly Plant. Starting February 28, 814 salaried and hourly workers at D-Ham, as its called, will be laid off. The 753 workers represented by the UAW will begin receiving offers in January to relocate to facilities in Michigan and Ohio, or buyout offers. As the 4-million-square-foot plant winds down through April 3 to a skeleton crew, the Cadillac CT6 ceases production in January 2020, and the last Chevrolet Impala comes off the line on February 28. The loss of the CT6 represents the end of Cadillac's latest brief, and highly regarded, adventure into flagship sedans. It might also mean the end of the 4.2-liter Blackwing twin-turbo V8 engine, at least for the moment. Both casualties are calamities. The death of the Impala closes the door on a nameplate in production for 52 years since 1957, having started off as a top-tier trim for the 1958 Bel Air known as the Bel Air Impala, once advertised with the line, "Lets you know you're the boss." As part of the new four-year labor agreement with the UAW, GM is keeping D-Ham open to build a new line of battery-electric vehicles, ultimately investing $3 billion and tripling employment to 2,225 workers when fully operational. The agreement described the coming EV as a "van" that would commence production in late 2021, but various reports say what's actually coming is a range of premium EVs in pickup and SUV bodystyles under the program codename BT1. The easy predictions put an electric GMC Sierra and Cadillac Escalade among the EV fold, but not until 2023, according to auto industry forecaster LMC Automotive. Before that, LMC claims an electric van will debut in late 2021, along with a battery-powered rebirth of the Hummer brand in pickup and SUV forms, also in late 2021.