1962 Chevrolet Corvette on 2040-cars

Auto blog

How Chevy Silverado, GMC Sierra will take on the Ford F-150 profit machine

FORT WAYNE, Ind. — When General Motors engineers were developing the 2019 Chevrolet Silverado and GMC Sierra pickup trucks, some of them joined public tours of Ford's Dearborn, Mich., factory to watch aluminum-bodied F-Series trucks go down the assembly line. The redesign of the Ford F-Series trucks, launched in 2014, set a new standard for fuel economy and lightweight vehicle construction. But armed with stopwatches and trained eyes, the GM engineers believed they saw problems. "They had a real hard time getting those doors to fit," Tim Herrick, the executive chief engineer for GM truck programs, told Reuters. His team did more intelligence gathering. They bought and tore apart Ford F-Series doors sold as repair parts. Their conclusion: GM could cut weight in its trucks for a lower cost using doors made of a combination of aluminum and high-strength steel that could be thinner than standard steel, shaving off kilograms in the process. These pounds-and-pennies decisions will have major implications in the highest-stakes game going in Detroit: dominance in the world's most profitable vehicle market, the gasoline-fueled large pickup segment. What's more, GM is banking on strong sales of overhauled 2019 Silverados and GMC Sierras to fund its push into automated and electric vehicles — a business many investors see as the auto industry's long-term future. The risks are high given the hits automakers have taken from U.S. President Donald Trump's trade policies. Rising aluminum prices spurred by Trump's tariffs are driving up costs on the Ford's F-Series, while rising steel and aluminum prices likewise drag on GM results. GM also has a significant risk should the United States, Mexico and Canada fail to agree on a new NAFTA trade deal, given GM trucks built at its Silao, Mexico, factory could face a 25 percent tariff if NAFTA collapses. Major profit per truck Interviews with GM executives and a tour at its factory here in northwest Indiana provide a detailed look inside GM's plan for the most important vehicles in its global lineup. These big pickups are everything Tesla's Model 3 or Chevy's Bolt electric car is not. The mostly steel body is bolted to the truck's steel frame, rather than the one-piece body and frame electric vehicles. The majority of trucks will have a V-8 gasoline engine powering the rear wheels — like the classic GM cars of the 1950s. Some Silverados will have new four-cylinder engines, but there is no electric or hybrid offering as of now.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

Nissan Leaf sales double Chevy Volt to close out winning 2014

To close out the year, sales of the two most-popular plug-in vehicles in the US kept going in the direction that they had been all year. The Chevy Volt dropped and the Nissan Leaf had another record month. Sound familiar? The Volt sold 1,490 units in December, a year-to-year drop of 37.7 percent. For all of 2014, Volt sales were down 18.6 percent to just 18,805 (from 23,094 in 2013). On the Nissan side of the ledger, the Leaf sold 3,102 units, up 22.7 percent from the 2,529 sold in December 2013. For the year, Nissan sold 30,200 Leafs, up 33.6 percent from the 22,610 sold in 2013. A few other things to note: For every month in 2014, the Leaf sold more than it did for the same month in 2013. For the Volt, this was only true for three months (April, May and July). Funnily enough, the Volt sold exactly 1,478 units in both March 2013 and 2014. The Volt's 2014 total was lower than both 2013 and 2012, while the Leaf had its best year ever. There were three months in 2014 when people bought at least twice as many Leafs than bought a Volt (September, November, December). The Leaf outsold the Volt every month in 2014. The closest gap was 215 units, in February. The biggest was 1,612, in December. As you've most likely seen, GM is still busy teasing the new Volt, which will make its official debut at the Detroit Auto Show next week. We'll have a more in-depth green car sales post up soon. <iframe embedded="true" "="" scrolling="no" src="https://docs.google.com/spreadsheets/d/1oIuH75vaSHaaplD4x6gLsYjSsiN4oGmez1T63eaYdhY/pubhtml?widget=true&headers=false" height="430"> Nissan celebrates 30,000 leaf sales in 2014, best year ever for sales of any plug-in vehicle NASHVILLE, Tenn. (Jan. 5, 2015) – Nissan, the world leader in electric vehicle sales, shattered yet another sales record with 30,200 LEAF vehicles sold in 2014, which is the first time any plug-in has sold more than 30,000 units in a single year. "Now in its fifth model year, Nissan LEAF is more popular than ever and continues to bring new buyers to Nissan," said Brendan Jones, director, Nissan Electric Vehicle Sales and Infrastructure. "From the beginning our vision was to bring electric vehicles to the mass market in a practical and fun-to-drive package, which is what makes Nissan LEAF the best-selling electric car in the world." Last month, Nissan sold 3,102 all-electric LEAFs, up 22.7 percent from the prior year and a December record.