1959 Chevrolet Corvette on 2040-cars
Bass Lake, California, United States
E-Mail Questions at: melvinmmmonroy@uktraders.com .
GORGEOUS CAR Like New! Extremely Low Miles, only 2,200 miles since complete FRAME-OFF restoration. Gorgeous White
Body with Red Interior, Desirable 4-speed Manual Transmission. It runs and drives like new.
Beautiful body, chrome, fit and finish. Restoration completed approximately 3 years ago. Original California
Yellow and Black License Plates come with the Car! Also comes with Matching Factory Fully Restored White Hard Top.
Current California Registration and Clear California Title. Car is located in Orange County, California. This is an amazing car and it is already priced to sell.
Chevrolet Corvette for Sale
- 1964 chevrolet corvette(US $27,600.00)
- 1970 chevrolet corvette(US $17,200.00)
- 2009 chevrolet corvette z06(US $21,100.00)
- 1967 chevrolet corvette(US $19,500.00)
- 1964 chevrolet corvette(US $13,700.00)
- 1965 chevrolet corvette(US $22,500.00)
Auto Services in California
Zip Auto Glass Repair ★★★★★
Z D Motorsports ★★★★★
Young Automotive ★★★★★
XACT WINDOW TINTING & 3M CLEAR BRA PAINT PROTECTION ★★★★★
Woodland Hills Honda ★★★★★
West Valley Machine Shop ★★★★★
Auto blog
Chevy's low-cost pedestrian avoidance to debut on 2016 Malibu
Tue, Jul 28 2015The mainstreaming of safety technologies that began on luxury vehicles will get a big boost from General Motors later this year. The General says it plans to offer 22 driver assistance systems across its product portfolio of 2016 models, starting with the redesigned Chevrolet Malibu - the one that we know will keep tabs on teenagers for the benefit of parents. Pedestrian avoidance will be another of its available options. Instead of kitting the sedan out with numerous and expensive radar arrays, the GM system uses the camera mounted next to the rearview mirror that is already used for the lane-keeping function. New software lets it detect pedestrians, and when it detects a potential collision with one, it can alert the driver and brake autonomously if the driver doesn't react. Eventually, engineers want to give it the ability to do the same with cyclists. Because it uses existing hardware updated with new code, GM says the application costs "a few hundred dollars." GM demonstrated the Front Pedestrian Braking preventing a crash with a dummy pedestrian at speeds up to 15 miles per hour. Automotive News reports that it will reduce the severity of impact up to 40 miles per hour, but "may not be of much use in collisions at higher speeds." That feature will also join the options list of the Cadillac CT6. The press release below has more on GM's driver tech soon on the way. Related Video: GM Paving Way to Smarter and Safer Driving at All-New Active Safety Test Area 22 crash-avoidance technologies offered on 2016 Chevrolet, Buick, GMC and Cadillac models MILFORD, Mich. 2015-07-24 – Chevrolet, Buick, GMC and Cadillac will offer 22 different active safety technologies across their 2016 model year U.S. lineups, ranging from driver alerts to those that automatically intervene and assist the driver in critical situations. Safety engineers will develop and test these and other safety technologies for products around the world at GM's new, 52-acre Active Safety Test Area at its Milford Proving Ground near Detroit. The $14 million facility officially opened Friday. "Our comprehensive safety strategy of helping customers before, during and after a crash continues," said Jeff Boyer, vice president of GM Global Vehicle Safety.
2015 Chevy Impala Bi-fuel burns CNG, starts at $37,385*
Tue, May 6 2014Currently, the only natural-gas-powered passenger car offered for sale by an OEM in the US is the Honda Civic Natural Gas. Starting this fall, that long-running CNG car will be joined by a CNG-burning 2015 Chevy Impala for both fleet and retail customers. General Motors announced today that the car will start at $37,385, plus an $825 destination charge. That comes to $38,210 before taxes and options. Those options include two trim lines, the base LS and the upper-level LT. Chevy doesn't break out the details in the press release announcing the price, but you can see the trim details for the standard gas-powered 2014 Impala here. Exact information on the 2015 models is not available just yet, but GM spokesman Chad Lyons told AutoblogGreen that the equipment that you see listed on the site for 2014 is "almost exactly the same" as what will be available for 2015. The 2015 Impala gets around 19 city mpg on CNG, but official EPA numbers are not yet available. That means the LS will come with 18-inch aluminum wheels, electric variable-assist power steering, projector-beam headlamps, and 10 air bags. The LT adds an eight-inch touch screen with MyLink, premium Cloth interior and dual-zone automatic climate controls. The cost for this upgrade is unspecified. For CNG purposes, we can ignore the numerical prefix used for the gas-powered LT trims, since that denominates the engine type, and all the CNG models use a 3.6-liter engine with hardened valves and valve seats that can better handle natural gas. The trunk capacity also drops from 18.8 cubic feet to 10 cu .ft. in order to fit in the CNG tank that holds the equivalent of 7.8 gallons of gas. That amount of CNG should move you 150 city miles, which is around 19 mpg, but official EPA numbers are not yet available. With the addition of the gasoline on board, the overall range is 500 city miles. The car burns CNG when available and switches to gas with "no interruption" either when the tank is empty or when the driver selects the gas tank. Find more details in the press release below. GM says the CNG Impala will will be available nationwide this fall. CNG is a growing fuel in the US, thanks in part to fracking. The Civic Natural Gas, which starts at $26,640, is growing towards a nationwide availability. Next year, for example, the Shell Eco-marathon Americas in Detroit will allow CNG for the first time. Chevrolet Announces Pricing of CNG-Capable 2015 Impala 2014-05-06 LONG BEACH, Calif.
Our favorite mid-engine Corvette theories and rumors
Tue, Sep 13 2016The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.