2008 Chevrolet Colorado Ls* Black*clean Carfax*sweet*low Miles*very Affordable! on 2040-cars

Auto blog

2015 Green Car Of The Year finalists announced, run alt-fuel gamut

The 2015 edition of the Green Car of the Year award is following right in the footsteps of previous years with a variety of alt-fuel powertrains making the just-announced finalists list. You've got your plug-in vehicle (the BMW i3), your compressed natural gas (the Chevy Impala Bi-Fuel), your high-efficiency diesel (the Audi A3 TDI), your 40+ mile-per-gallon gas engine (the Honda Fit) and, finally, a car that can do a little bit of everything (the VW Golf). The Golf is available – at least in some parts of the US – with three different powertrains: a 2.0-liter diesel, a gasoline engine and all-electric drive. The Impala can burn either natural gas or gasoline in its 3.6-liter engine. The A3 is an efficiency champ, able to get 73.5 mpg on some European tests. The i3 can be a pure electric vehicle or come with a short range extending engine. And the Fit brings 41 miles to the gallon in a practical, affordable package. The GCOY award is announced every year at the Los Angeles Auto Show by Green Car Journal. The committee doesn't just take the fuel-saving technology into account, but also a vehicle's "availability to the mass market." Last year, the Honda Accord Hybrid/Plug-In Hybrid won top honors, following up on wins from the Ford Fusion models (plug-in hybrid and hybrid) for 2013, the Honda Civic Natural Gas for 2012 and the Chevrolet Volt for 2011. FINALISTS ANNOUNCED FOR 2015 "GREEN CAR OF THE YEAR"" Green Car Journal to Reveal Winner of 10th Annual Award at LA Auto Show" Press & Trade Days, November 20 LOS ANGELES, CA (October 21, 2014) – Green Car Journal has announced its five finalists for the magazine's high-profile 2015 Green Car of the Year® program. The 2015 models include the Audi A3 TDI, BMW i3, Chevrolet Impala Bi-Fuel, Honda Fit, and VW Golf. The Green Car of the Year® award, an honor widely recognized as the auto industry's most important environmental accolade, celebrates its 10th anniversary this year. An increasing number of vehicle models are considered for the Green Car of the Year® program each year, a reflection of the auto industry's expanding efforts in offering new vehicles with higher efficiency and improved environmental impact. Green Car Journal has been honoring the most important "green" vehicles every year at the LA Auto Show, since its inaugural award announced at the show in 2005.

How GM engineers are using diaper 'snow' to keep you warm

Testing how snow affects General Motors' vehicles isn't really a problem right now for the company's engineers, but in the dog days of summer the process isn't exactly easy. The only real option is for them to book time at the automaker's climatic wind tunnel. However, a flash of brilliance from an engineer allows snow to be simulated regardless of the temperature outside, and the discovery is all because of his daughter's wet diaper. The realization came to GM Thermal Systems engineer Nicholas Jahn while he was swimming with his daughter and noticed how her diaper ballooned in size in the water. He found out the substance that makes this possible is called sodium polyacrylate. When the material gets wet it grows and forms fluffy flakes that are a close imitation of snow. Best of all, the stuff can be prepared easily any time of the year, and it's reusable. The engineering team uses the material to test the effectiveness of the heating systems of GM's vehicles. They spread the sodium polyacrylate over the inlets at the base of the windshield to obstruct the airflow and then crank the heater. After some time, they can see how much is being sucked into the system and design more efficient systems in the future. See how the process works in the video above and read about the diaper discovery in GM's press release below. Diapers Change Chevy Cruze Winter Warm-up Time GM validation engineer uses diaper material "snow" to reduce frigid drives 2015-01-06 DETROIT – An item commonly found on an infant's changing table is helping General Motors' engineers simulate snow year round, ensuring heating systems in cars like the 2015 Chevrolet Cruze can quickly and efficiently warm its interior. Packed snow can prevent air from entering the inlet panel at the bottom of the windshield, obstructing the flow of air into the heating system and reducing the amount of air it can push out. This can lead to less efficient warming of the car's interior and windshield defrosting. "The last thing anyone wants to do when it's freezing cold out is scrape their windshield," said Nicholas Jahn, GM Vehicle Thermal Systems engineer. "The testing we perform on the Chevrolet Cruze with the diaper material allows us to maximize the car's heating capabilities." Ironically, Jahn stumbled upon his diaper-based testing method in the middle of summer. During a swim with his daughter, he noticed her diaper multiplied in size when it came into contact with water.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging