Chevrolet Cheyyene Short Bed Truck 4x4 All Original Pickup 1975 C-10 No Reserve! on 2040-cars

Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Sunday Drive: A tale of old favorites and upcoming challengers

Sedans and crossovers dominated the attention of our readers last week, led by the completely redesigned 2018 Honda Accord. It's the Japanese automaker's flagship, and people are seriously interested in finding out how good the latest Accord is. So interested, in fact, that no other single story came close to the brand-new Accord in Autoblog reader interest. Moving down the list we find the equally new 2018 Buick Enclave. The three-row crossover has a lot to offer a family, especially one looking for a nice, quiet ride. If you're looking for the exact opposite of nice and quiet, but still want enough room for you and your significant others, the Subaru WRX that we tested last week may be the perfect ride for you. Or, if you just want to drive fast and aren't at all worried about space, there's the Camaro SS. See? We offer something for everybody. From there, we look to the future. Who isn't interested in seeing the first fully electric vehicle from Porsche? And who isn't intrigued to see the Mission E testing alongside a gaggle of Teslas? A brand-new Jeep is always a big deal, especially when it's the revival of a classic nameplate like the Grand Wagoneer. And finally, we have something completely different: the Rezvani Tank. As always, tune in to Autoblog next week for a front-row seat to all the happenings worth following in the automotive industry. 2018 Honda Accord First Drive | Feels like home again 2018 Buick Enclave First Drive Review | Fortress of quietude 2018 Subaru WRX Drivers' Notes | Turbo traditionalist 2018 Chevy Camaro SS Drivers' Notes | Demonstrative power, middling interior Porsche Mission E caught testing against Teslas Jeep three-row SUV caught on public roads — Grand Wagoneer, perhaps? Rezvani Tank: It's like a Hot Wheels car brought to life Green Buick Chevrolet Honda Jeep Porsche Subaru Crossover SUV Electric Future Vehicles Luxury Off-Road Vehicles Special and Limited Editions Performance Sedan porsche mission e sunday drive

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video: