Find or Sell Used Cars, Trucks, and SUVs in USA

1968 Chevy Chevelle Ss 396/350 2-door Sport Coupe Original Survivor True 138 on 2040-cars

US $27,500.00
Year:1968 Mileage:74159
Location:

Houston, Texas, United States

Houston, Texas, United States

ORIGINAL SURVIVOR - 1968 CHEVY CHEVELLE SS 396/350 2-DOOR SPORT COUPE

A true American Classic -  2-owner partially restored to original condition with 74,458 original miles and matching numbers, a true 138 with a 396/350 SS factory engine, Muncie 4 Speed Manual Transmission (Rock Crusher), Rockchester Quadra Jet 4-bbl, Dual Exhaust, Power Steering, No A/C, Original AM Radio (not hooked up),
repainted in the original color coded Y-2 Butternut Yellow with Black stripes, Restored Black vinyl top, Restored Vinyl Bench Seats, Restored Carpet and Headliner, Chrome is in excellent condition, New Firehawk Indy 500 Tires on Original Rims, the Radio Antenna is broken,  the fan guard has a horizontal crack, the cast iron below block exhibits oxidationNo Body Dings or Scratches,  The engine runs strong and has not been rebuilt.  My rating on the paint job is 9 on a VAS of 10.  VERY NICE CAR!!  GARAGED KEPT AND COVERED!!

To simplify the Numbers for you, here is the breakdown:

VIN: 13837 BAL11433

ENGINE BLOCK NUMBER: T0709EF    18B230116

MANIFOLD INTAKE MANUFACTURE DATE: F308   (June 30, 1968)

INTAKE MANIFOLD CAST NUMBER: 3883948

FIRING ORDER: 18456672


*****According to my research, this 396/350 1968 Chevelle was built with the cast iron intake manifold number 3883948, came with the Rockchester 4-bbl and no oil splash shield.  The 1968 Chevelle was built with the engine block suffix letters EF indicating a 396 CDI and 350 HP.*****
 
(I stopped the last auction when I realized I had inaccurate information in my ad, and that I failed to provide specific pertinent vehicle information such as  the VIN, Engine Block Number, the Manifold Number and Date Code.  Sorry about that.  There are now photos of all the aforementioned information)


I have done my best to disclose all information known about this vehicle, but I welcome and encourage a buyers inspection.   If you plan to have a buyers inspection, please make sure you inspect the vehicle prior to the auction ending.  The Chevelle is located in Houston, Texas.  Please contact me to schedule a date and time for a vehicle inspection.  Inspection fees if any are Buyers responsibility.

Payment Terms: Cash, Cashier's check/Money Order or Wire Transfer must be made within 7 days of auction end. 


On Dec-12-13 at 08:48:55 PST, seller added the following information:

 This is a 2 owner vehicle and has been owned by the second owner since August 1995. 


On Dec-19-13 at 14:16:08 PST, seller added the following information:

 THE CORRECT VIN NUMBER SHOULD BE: VIN: 13837 8AL11433

Auto Services in Texas

Yang`s Auto Repair ★★★★★

Auto Repair & Service, Brake Repair
Address: 9523 N Interstate 35, Alamo-Heights
Phone: (210) 657-4013

Wilson Mobile Mechanic Service ★★★★★

Auto Repair & Service
Address: 3830 An County Road 1231, Neches
Phone: (903) 922-3486

Wichita Falls Ford ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 5401 Kell Blvd, Holliday
Phone: (940) 692-1121

WHO BUYS JUNK CARS IN TEXOMALAND ★★★★★

Used Car Dealers, Automobile Parts & Supplies, Recycling Centers
Address: Bonham
Phone: (580) 760-6209

Wash Me Down Mobile Detailing ★★★★★

Auto Repair & Service, Car Wash, Car Washing & Polishing Equipment & Supplies
Address: Lewisville
Phone: (972) 201-3420

Vara Chevrolet ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Body Repairing & Painting
Address: 8011 Interstate 35 S, Lackland-A-F-B
Phone: (210) 924-2000

Auto blog

Weekly Recap: GM plans massive new paint shop at Chevy Corvette factory

Sat, May 23 2015

General Motors is laying out some serious green to maintain the Chevy Corvette's expansive color palette. The automaker is breaking ground on a new paint shop this summer that's part of a $439-million investment to upgrade the 34-year-old Bowling Green, KY, factory that builds the Stingray. The massive new structure will total 450,000 square feet, nearly half the size of the current 1-million square-foot facility. Construction is expected to take two years and won't impact Corvette production. The upgrades include new robots that save paint and create a better finish, longer, more efficient ovens to bake in the finish, and LED lighting. There's also a dry scrubbing booth technology with a limestone handling system that eliminates waste. GM has invested $135 million in the factory in last four years for the changeover to build the C7 and to relocate its Performance Build Center to Bowling Green. The improvements continue to modernize the Kentucky factory, which has become a tourist attraction in its own right, as more than 56,000 enthusiasts visited it last year. The upgrades are part of a $5.4-billion investment GM confirmed in April that will remake its US footprint in the next three years. The Bowling Green expansion underscores GM's continued commitment to the Corvette, which sold nearly 38,000 copies around the world last year, an eight-year high. "With this major technology investment, we can continue to exceed the expectations of sports car buyers for years to come," North American manufacturing manager Arvin Jones said in a statement. OTHER NEWS & NOTES Takata recall hits 34 million vehicles The National Highway Traffic Safety Administration expanded the Takata airbag recall to an almost unthinkable 34 million vehicles on Tuesday. The recall is part of an agreement reached by the two sides where Takata admitted some of its airbag inflators have a defect, and the deal compels the company to comply with all future regulatory actions and investigations. Takata's airbag inflators were produced with "a propellant that can degrade over time" and lead to ruptures, NHTSA said. Six deaths have been attributed to the flaw worldwide. Investigations conducted by Takata, automakers, and others have not determined the exact cause of the inflator problem, but NHTSA said moisture appears to alter the propellant's chemical structure. It then ignites too rapidly, creates too much pressure that ruptures the inflator, and blasts shards of metal at passengers.

A car writer's year in new vehicles [w/video]

Thu, Dec 18 2014

Christmas is only a week away. The New Year is just around the corner. As 2014 draws to a close, I'm not the only one taking stock of the year that's we're almost shut of. Depending on who you are or what you do, the end of the year can bring to mind tax bills, school semesters or scheduling dental appointments. For me, for the last eight or nine years, at least a small part of this transitory time is occupied with recalling the cars I've driven over the preceding 12 months. Since I started writing about and reviewing cars in 2006, I've done an uneven job of tracking every vehicle I've been in, each year. Last year I made a resolution to be better about it, and the result is a spreadsheet with model names, dates, notes and some basic facts and figures. Armed with this basic data and a yen for year-end stories, I figured it would be interesting to parse the figures and quantify my year in cars in a way I'd never done before. The results are, well, they're a little bizarre, honestly. And I think they'll affect how I approach this gig in 2015. {C} My tally for the year is 68 cars, as of this writing. Before the calendar flips to 2015 it'll be as high as 73. Let me give you a tiny bit of background about how automotive journalists typically get cars to test. There are basically two pools of vehicles I drive on a regular basis: media fleet vehicles and those available on "first drive" programs. The latter group is pretty self-explanatory. Journalists are gathered in one location (sometimes local, sometimes far-flung) with a new model(s), there's usually a day of driving, then we report back to you with our impressions. Media fleet vehicles are different. These are distributed to publications and individual journalists far and wide, and the test period goes from a few days to a week or more. Whereas first drives almost always result in a piece of review content, fleet loans only sometimes do. Other times they serve to give context about brands, segments, technology and the like, to editors and writers. So, adding up the loans I've had out of the press fleet and things I've driven at events, my tally for the year is 68 cars, as of this writing. Before the calendar flips to 2015, it'll be as high as 73. At one of the buff books like Car and Driver or Motor Trend, reviewers might rotate through five cars a week, or more. I know that number sounds high, but as best I can tell, it's pretty average for the full-time professionals in this business.

Recharge Wrap-up: Volt makes up third of Quebec Chevy dealerships sales, Tesla seeks Aussie talent

Wed, Nov 5 2014

A Chevrolet dealership in Quebec has had the Volt make up 35 percent of its sales so far this year. Bourgeois Chevrolet in Rawdon, Quebec received recognition for the feat at the 2014 Electric Vehicle Conference, where it won the award for Leading Plug-in Hybrid Electric Vehicle Dealership. To sell that many, Bourgeois Chevrolet had to import used Volts from the US, and keeps about 50 units on the lot in various configurations. The conference also saw Park Avenue Nissan of Brossard, Quebec win the Leading Battery Electric Vehicle Dealership Award, and Loch Lomond Mitsubishi of Saint John, New Brunswick receive the award for Electric Vehicle Dealership Inspiration. Read more at Green Car Reports. Tesla Motors has begun scouting Australian engineers as other automakers shutter operations there. Ford, General Motors and Toyota have announced that they will shut down their Australian factories, leaving behind a lot of unused talent. Tesla recently held a "Recruiting Open House" in Melbourne for engineers to fill positions at its plant in Fremont, CA, where they will be paired with other Aussie engineers already on staff. Read more at Green Car Reports, or at Motoring. Electric turbochargers may come to play a key role in making internal combustion engines more efficient. Valeo recently showed an electric turbo it plans to supply to an unnamed automaker at a fuel economy showcase event at the EPA's National Vehicle Emissions and Fuel Lab. Electric turbochargers have the advantage of greatly reduced lag when compared to exhaust-driven turbos. They also work well when paired with cylinder deactivation, providing a much-needed boost when driving on a grade, which can help reduce the need for cylinders to reactivate. Independence from the exhaust system also makes it easier to package the turbocharger wherever there is room. Read more from Navigant Research. US crude oil futures have dropped to their lowest in more than two years. Saudi Arabia cut oil costs for the US and raised them for Europe and Asia as the US has increased output. On November 3, US crude futures fell as much as 2.2 percent in New York. West Texas Intermediate closed at $78.78, the lowest since June 2012. Brent crude slipped $1.08 to $84.78 a barrel. Read more at Bloomberg.