1967 Chevrolet Chevelle Ss Convertible Pro Tourning Clone on 2040-cars
Richmond, Virginia, United States
Everything on this Chevelle has been has been replaced or refurbished. This includes: Rebuilt 454ci 4 speed muncie transmission 12 bolt chevy posi rear all bushing and suspension components 4 wheel power disk brakes new chrome and stainless trim gas tank and lines Power steering like the original SS big block Firestone Red line tires with rally wheels Custom auto sound radio with usb port. The underside has been cleaned and painted and doesn't show any signs of rust. If the floor has been replaced it was done professionally along with other body panels. I purchased this car in Florida 1 1/2 years ago after it had been restored and I have driven it less than 1000 miles. Since I own an upholstery shop I completely changed the interior to custom black glove leather. I don't like the cheap aftermarket material. The convertible top and boot have been replace The body is straight with new paint. The car drives great and I have enjoyed it. I encourage you or your representative to come inspect the car. A lift will be made available. There is no warranty expressed or implied. If you have any Questions please give me a call. (804) 627-1193 Thanks John |
Chevrolet Chevelle for Sale
1967 chevrolet chevelle 468ci v8(US $36,950.00)
1972 chevrolet chevelle ss 454 bbc tribute car california.no rust(US $14,900.00)
1972 chevelle 454 ss(US $22,500.00)
1970 chevelle ss396
1968 chevelle ss396 real 138 car no clone
1970 chevelle ss clone
Auto Services in Virginia
Whitten Brothers Mazda ★★★★★
West Broad Audi ★★★★★
Watkin`s Garage ★★★★★
Virginia Auto Ctr ★★★★★
Victory Lane Auto Sales ★★★★★
Van`s Garage ★★★★★
Auto blog
Expect greater differentiation in GM's next-generation SUVs
Thu, 03 Jan 2013General Motors says its next-generation Chevrolet Tahoe, Suburban, GMC Yukon and Cadillac Escalade models will offer shoppers improved interior differentiation. Car and Driver recently caught up with Chris Hilts, GM's creative manager of interior design, who said that the cabins will all feature unique instrument panels, consoles, center stacks and switchgear moving forward. Apparently GM is now aware that consumers may be bothered by the fact that today's $85,000 Escalade has effectively the same cabin as a $45,000 Tahoe. Hilts says SUV buyers want more refinement than their pickup purchasing counterparts - and those same buyers also want their SUVs to have more exterior differentiation between the company's Silverado and Sierra pickup lines. Shocking.
That all sounds good to us, but we've heard this song and dance before. GM made big waves about how different the new-for-2013 Silverado and Sierra would look from each other, but judging by what we've seen so far, GM's stylists are painting in shades rather than with the full spectrum. For more on the what to expect out of GM's new SUVs, click on the C/D link below.
GM patent reveals new two-stage turbocharger
Fri, Jun 24 2016Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging
First 2015 Chevy Corvette Z06 Sells For One Million Dollars
Mon, Apr 14 2014NASCAR team owner Rick Hendrick loves buying first-built Chevrolet models for charity. He paid $1 million to buy the first production 2014 Corvette Stingray Convertible and $650,000 to get the first 2014 Chevy Camaro Z/28. Hendrick's latest purchase happened at the Barrett-Jackson auction in Palm Beach where he got into a bidding war to pay $1 million to get the first 2015 Corvette Z06. The bidding came quick with the car reaching $100,000 within 3 seconds and hitting $500,000 in about 35 seconds. The money from the sale was donated to the Karmanos Cancer Institute. Related Gallery Harley Earl's Corvette Up For Auction