1967 Chevrolet Chevelle Base 5.3l on 2040-cars

Auto blog

Should heavy-duty pickup trucks have window stickers with fuel mileage estimates?

If you were to stroll into your nearest Chevrolet, Ford, GMC, Nissan, or Ram dealership, you'd find a bunch of pickup trucks. Most of those would have proper window stickers labeled with things like base prices, options prices, location of manufacture, and, crucially, fuel economy estimates. But you'd also run across a number of heavy-duty trucks with no such fuel mileage data from the Environmental Protection Agency. The EPA doesn't require automakers to publish the valuable miles-per-gallon measurement for vehicles with gross weight ratings that exceed 8,500 pounds. That makes it difficult for consumers to compare behemoths powered by turbocharged diesel engines – between one another, and between smaller, gasoline-fueled trucks. Consumer Reports doesn't think it should be this way, and it's spearheading an effort (PDF link) to get the government to require manufacturers to publish fuel economy estimates. In its own testing, CR found that heavy-duty pickups powered by Ford's Power Stroke, GM's Duramax, and FCA's Cummins diesel engines (which doesn't include the Ram's EcoDiesel) get worse fuel mileage than their lighter-duty gas-powered siblings. We're not so sure HD-truck buyers are unaware of this fact – big diesels don't really come into their own until big loads are placed in their beds or attached to their trailer hitches. Under heavy workloads, the diesel trucks will almost certainly return greater efficiency than a similar gas-powered truck. What's more, HD trucks with lumbering diesels in general make the driver feel more confident while towing due to greater torque at low engine RPM than gas trucks. They also offer greater max-weight limits. Still, we agree EPA fuel mileage estimates should be offered for heavy-duty pickups. And we think the comparisons provided by Consumer Reports might be interesting to potential buyers. Click here to see the results of CR's tests, and let us know what you think using the poll below. Related Video: Featured Gallery 2017 Ford F-Series Super Duty: First Drive View 22 Photos News Source: Consumer Reports Government/Legal Green Read This Chevrolet Ford GMC Nissan RAM Fuel Efficiency Truck Commercial Vehicles Diesel Vehicles poll gmc sierra hd chevy silverado hd

GM trucks get hybrid versions, but you'll probably never see one

A few years ago, General Motors sold hybrid versions of its Chevy Silverado and GMC Sierra pickups. They weren't very good, using GM's old two-mode hybrid system that resulted in only negligible fuel economy gains. But GM's trying again, launching eAssist models of the 2016 Silverado and Sierra that are said to offer 2-mpg improvements in city, highway, and combined fuel economy ratings. Problem is, you probably won't be able to get one. Only 700 eAssist trucks will be made for the 2016 model year – 500 Silverados and 200 Sierras. When you consider that GM moved 824,683 examples of its light-duty pickups in 2015, this small run represents 0.08-percent of all Silverado/Sierra production, and GM says it "will monitor the market closely ... and adjust as appropriate moving forward." But that's not the only limitation. The eAssist trucks will only be sold through California dealers. For the Silverado, eAssist can only be optioned on the 1500 Crew Cab 1LT 2WD model, and for the Sierra, the fuel-saving technology is solely available on the 1500 SLT Crew Cab 2WD model with the SLT Premium Plus package. Granted, in terms of the Sierra, that means you get niceties like LED headlights and taillights, Apple CarPlay and Android Auto, Bose premium audio, heated seats and steering wheel, lane keep assist, and more. In the trucks, eAssist combines a small electric motor and 0.45-kWh battery pack with the pickups' 5.3-liter V8. GM estimates total output of 355 horsepower and 383 pound-feet of torque – no more horsepower than the non-eAssist trucks, but three more pound-feet of torque. GM says the eAssist trucks can tow up to 9,400 pounds, and the battery only adds 100 pounds to the trucks' weight. The electric motor provides 13 hp and 44 lb-ft of torque for a boost of acceleration off the line, or during passing. It also allows the engine to run in four-cylinder mode for longer periods of time. eAssist uses regenerative braking to help power onboard electrical systems, and adds start/stop to the powertrain. Finally, the so-equipped trucks have a six-percent improvement in aerodynamics, thanks to a soft tonneau cover and active grille shutters in the front fascia. Great news is, the eAssist option is relatively inexpensive, only costing $500. But good luck getting your hands on one.

Watch this time-lapse build of the Chevy SS for NASCAR

There's only about a week left until we get our first look at the production version of the 2014 Chevrolet SS sedan, but Chevrolet NASCAR teams have been looking at the race version of the car all winter. Autoweek has posted a really neat time-lapse video showing just a portion of what it takes to build one of NASCAR's new Gen6 stock cars.
Though the video is quite brief, it does show almost the entire build process starting with just the car's nose, and it gives us a good look at how integral the template is to the final product. As a bonus, Hendrick Motorsports also provided some videos showing two of its teams performing pit stop tests over the winter. The second video shows some of the more detailed aspects of the racecar's rear end, including the stock-looking trunk cutout and a newly mandated rear bumper extension that will be used on super speedways like Daytona and Talladega.
To see what Team Chevy has been up to all off-season, check out all three videos posted after the jump.