Find or Sell Used Cars, Trucks, and SUVs in USA

1964 Chevrolet Chevelle Pro Touring - Magazine Car - 625 Hp Lsx 427 Cubic Inch on 2040-cars

Year:1964 Mileage:125 Color: White /
 Black
Location:

Temecula, California, United States

Temecula, California, United States
Advertising:
Transmission:4L65E Overdrive
Engine:LSX 427ci
Body Type:2 Door
Vehicle Title:Clear
For Sale By:Owner
Year: 1964
Interior Color: Black
Model: Chevelle
Number of Cylinders: 8
Trim: Sports Coupe
Drive Type: RWD
Mileage: 125
Sub Model: Sports Coupe 2 Door
Warranty: Vehicle does NOT have an existing warranty
Exterior Color: White
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

You are bidding on a magazine "Pro Touring" project - a 1964 Chevrolet Chevelle Sports Coupe ("Post") 2-Door that was completely built from top to bottom by PowerTV. This build was extensive, and has produced an amazing vehicle that offers top flight performance from top to bottom - power, acceleration, braking, handling and reliability. This car is a show stopper that will stop people in their tracks, it has the looks to match it's performance.  There is 125 miles on the complete build. The car starts, runs, drives, shifts, and performs. Please see videos and photos to see ALL of the details on the build - dyno results and performance testing. This Chevelle has the best of the best - a Blueprint Engines 427 cubic in "LSX" conversion making 625 horsepower, FAST "EZ-EFI" fuel injection, a Gearstar 4L65E overdrive transmission,  Ridetech Suspension, Billet Specialties Wheels, and more!


To reproduce this build from top to bottom - car to paint to parts - would be about $70,000 and take 1+ year of work. 

Everything on this build has 125 miles on it - including the power train and all upgrades.

Exterior Appearance
Paint is a 9.75 out of 10. Car Show Grade. White Pearl PPG with a Light Purple "Base" . You can only see the purple UNDER the pearl white in certain light conditions, but it looks amazing. No dents, dings, scratches. This car is housed 100% indoors under a very expensive premium car cover. Never driven in rain. Paint job was $9,700. Fully functional lights, glass is in good condition. The chrome and trim is in excellent shape. 

Engine: Blueprint Engines "Pro Series" 427 cubic inch LSX Crate Engine. 

625 horsepower. 125 miles on engine. Engine is $9,985 at Summit Racing in "Carb" form. Our has been converted to Fuel Injection using a FAST "EZ-EFI" EFI Conversion complete with EFI Fuel System, a $2,000 upgrade. These BluePrint Engines Pro Series Chevy LS 427 c.i.d. crate engines put down a whopping 625 hp and 550 ft.-lbs. of torque! BluePrint Pro Series Chevy 427 c.i.d. dressed crate engine assemblies are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced to within 2 grams on a computerized balancer. BluePrint Pro Series crate engines are also dyno-tested and include the dyno sheets.

* New GM LS engine block
* 4340 forged 4.125 in. stroke crankshaft
* 4340 forged 6.125 in. long connecting rods
* Forged pistons
* 11.0:1 compression
* Hydraulic roller camshaft, .624 in. lift intake, .624 in. lift exhaust, 239/255 intake/exhaust duration at .050 in. lift with 114 degree lobe separation
* Aluminum GM LS cylinder heads
* Double roller timing chain
* Aluminum single plane intake manifold
* Full roller rocker arms
* Ignition coil packs
* Spark plug wires
* Spark plugs
* Harmonic balancer

Upgrades/Additional Items include: 
• FAST EZ-EFI EFI Conversion
• FAST EFI Fuel System
• Earl's Stainless Steel Hose & Aluminum AN Fittings
• Lokar Throttle Cable & LSX Conversion Pedal
• K&N Drop Air Filter
• MSD 6LS Ignition
• New GM Factory Coils

Exhaust:

• Hedman 1-78 Long Tube Coated Headers, Jet Coated
• Flowmaster 3" Mufflers
• Flowmaster 3" Tailipipes

Front Drive: Billet Specialties Complete Billet Front Drive Assembly & Kit
Cooling: New GM Water Pump, Afco Radiator & Electric Fan custom built for LS Conversion

Drivetrain:

• Gearstar 4L65E Level 4 Transmission, Overdrive
• Capable of Supporting 650 hp and 650 Ft Torque
• Gearstar Billet Custom Torque Convertor, 2800 Stall
• Upgraded Sprag, Pump, Rotor in Transmission
• Complete Torrington Bearing Kit
• Heavy Duty 5 Pinion Front and Rear Planetary Gear Set with Sun Gear
• Wide Carbon-Fiber 2-4 Band
• 30, 000 GVW Derale Cooler
• Transmission setup is $3895 plus shipping
• TCI EZ-TCU Electronic Transmission Controller
• 12-bolt rear end with 31-spline axles, Posi-traction, and 3.50 gears.

Suspension

The suspension on the Chevelle is a complete engineered Ridetech Suspension 1964-1967 A-Body system, including:

 - Ridetech Front Upper & Lower Control Arms
 - Ridetech Coil Overs, Adjustable Shocks
 - Ridetech Splined Front Sway Bar
 - Ridetech ear Upper & Lower Control Arms
 - Ridetech rear Sway Bar 

Wheels/Tires

Billet Specialties Street Smart Billet wheels were selected and perfectly fill the wheel wells. The rear wheels were custom sized with backspacing to provide that perfect "tuck" look. Wheels are 17 x 8 front, 17 x 9.5 rear, and the tires are.

Continental Tires
 - Extreme Contract DW 245/45/ZR17 Front
 - Extreme Contact DW 275/40/ZR17 Rear
 - MT Drag Radials 275/40/17 Rear

Two sets of rear tires are provided so that you can have drag radials for any potential quarter mile action, or the Continental's for street driving and auto cross performance.

Interior

Interior is a 9.25 out of 10. Interior is fully restored with new SCAT Pro Car Seats, rear seating surfaces recovered, new carpet, door panels, and floor mats. A Dakota Digital gauge system in included with digital gauges replacing the factory gauges. See pictures it's amazing. Only defects - the paint portions of the dash has a small area area where we had to touch it up. It could use a minor fix - perhaps a few hundred dollars for a professional paint job. On the Chevelle dash about 20% of the dash is painted metal.

LS Conversion:

Muscle Rods LS Conversion Mount Kit

 - Transmission Cross Member
 - Motor Mounts
 - Transmission Mount

 As part of the conversion, we installed a new transmission tunnel to make the swap perfect!

SSBC Brakes 

 - 13 Inch front brakes A123-14DSR
 - 2 Inch Drop Spindles
 - SSBC 9-inch Brake Booster & Master Cylinder
 - Front: Tri-Power 3-Piston aluminum calipers
 - Rear: Single piston aluminum caliper
 - Braking is excellent.

Overall:

 - This 1964 Chevelle does it all. Handling, power, street ability, durability, acceleration and braking. It is a complete magazine project build. It was constructed in multiple articles, videos, and all of the work was done by professional mechanics. It would be an amazing car for someone - a true dream come true. It gets looks like you wouldn't believe, and sounds amazing. We are selling it because we are going to work on our "NEXT" build and that's what we do - we build cars, we show the world how we do it, and then we keep going. This will be a great addition to someone's garage. Please don't hesitate to ask questions.

Questions:

- I would anticipate a lot of questions about the build and car. Feel free to message me via eBay or call (949) 413-5702. You are more than welcome to come see the vehicle in person as well give just me a call or e-mail and we can arrange for you to see the vehicle.

Auction: 

- I reserve the right to end the auction early, as the car has some local interest.

Videos:



Auto Services in California

Yuki Import Service ★★★★★

Auto Repair & Service, New Car Dealers, Brake Repair
Address: 2233 Corinth Ave, Universal-City
Phone: (310) 914-1601

Your Car Specialists ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Transmission
Address: 13903 Marquardt Ave, Compton
Phone: (562) 802-1332

Xpress Auto Service ★★★★★

Auto Repair & Service
Address: 14834 Valley Blvd, Bell
Phone: (626) 820-0267

Xpress Auto Leasing & Sales ★★★★★

New Car Dealers, Automobile Leasing
Address: 701 E Colorado St, South-El-Monte
Phone: (818) 500-9933

Wynns Motors ★★★★★

Auto Repair & Service, New Car Dealers, Brake Repair
Address: 55 Oak St, Brisbane
Phone: (415) 626-6936

Wright & Knight Service Center ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Engine Rebuilding
Address: 566 E St, Imperial
Phone: (760) 344-3370

Auto blog

Recharge Wrap-up: Range-extended EV taxis in London, 2016 Chevy Volt interior two years old

Fri, Feb 13 2015

The first Metrocab range-extended EV taxis are operating on the streets of London. The cabs use a 12.2-kWh battery and two 50-kW motors, as well as a 1.0-liter gasoline range extender. Fuel economy is 98 MPGe on the ECE101 cycle, and total driving range is over 348 miles before needing to charge or refuel. Cabbies can expect to save GBP20 to GBP40 (about $30 to $60) per day on average. "The cash savings on fuel are significant, the ride and comfort outstanding, and my first customers are thrilled with the new cab," says the first operator of the new EV taxi, Preston Morris. "With its air suspension providing unrivaled comfort, panoramic glass roof for views of the city and silent powertrain, what's not to like?" Read more in the press release below. Chevrolet has had the interior design of the 2016 Volt finished for two years already, according to GM interior designer John McDougall. Beginning around 2010, GM received sketches from designers worldwide before narrowing it down to a handful of designs. Then the top three choices were molded from clay. The chosen theme was then refined for up to 18 months. "Every little thing you can imagine goes into that," says McDougall. "The glare angle from the windows, the placement of the controls, the placement of the seat. You have to create something that's beautiful and functional." Read more at GM Authority and at Inside EVs. More details have emerged about the Second Life Batteries Alliance. Vattenfall has announced a research project in partnership with BMW and Bosch to use retired EV batteries for stationary, grid-connected energy storage in Hamburg, Germany. Over 100 lithium-ion batteries from BMW i3 and ActiveE vehicles will make up a two-mWh storage unit for grid balancing, enough to power 30 four-person households for a week. The system is "compact enough to fit in a small building," says Bosch. Such storage systems are especially fit for storing and moving alternative forms of energy, which often fluctuate in supply more than electricity from a traditional power plant. Vattenhall will operate the storage unit for 10 years, with Bosch managing the batteries, during which time the three partners hope to learn more about battery applications and their performance over time. Read more at Green Car Congress, or in the press release below.

2016 Chevy Volt powertrain video teasers

Fri, Oct 31 2014

If there's one thing we've learned about plug-in vehicle fans, you have a thing for seeing your cars get made. The series of videos showing BMW i3 production was strangely popular, as were the shots from inside the VW e-Golf plant. Well, with General Motors pulling the veil off of the 2016 Chevy Volt this week, it's time to take a peek at the production process for that vehicle as well. You're welcome. Up first we've got a clip from CNN Money showing a little bit about how the new Volt's new battery pack and other powertrain components are made. Those of you who are trying to read the lithium tea leaves and see if the new shape reveals that the 2016 Volt will have five seats might want to check it out. Then we've got two clips from GM itself, one showing an animation about the updated Voltec powertrain and another with some B Roll of the old Volt. Since GM doesn't want us to see the new car quite yet, we'll have to enjoy this for now. Watch below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

GM sees 'strong year' in 2018, then gold in Chevy Silverado for 2019

Tue, Jan 16 2018

DETROIT — General Motors said on Tuesday it expects earnings in 2018 to be largely flat compared with 2017, but that profits should pick up pace in 2019 as its revamped line of high-margin pickup trucks hits the U.S. market. The 2018 earnings outlook was above market expectations, sending GM shares up more than 3 percent in premarket trading. "GM had a very good 2017 as we continued to transform our company to be more focused, resilient and profitable," GM Chief Executive Mary Barra said in a statement. "We are positioned for another strong year in 2018 and an even better one in 2019." GM and its Detroit rivals, Ford and Fiat Chrysler Automobiles, are bringing on new trucks at a time when overall U.S. new vehicle sales have been falling, but truck sales continue to grow as consumers abandon passenger cars in favor of pickups, SUVs and crossovers. GM on Saturday fired a new round in the battle for profits from one of the U.S. auto industry's most lucrative segments when it showed a new generation of its Chevrolet Silverado pickup truck at the Detroit auto show. The new Silverado, a highlight of the event, is the successor to GM's best-selling vehicle in North America. Sales of the current Silverado rose nearly 2 percent to 585,000 vehicles in 2017. In the coming months, the company will also reveal a revamped GMC Sierra pickup truck. U.S. new vehicle sales fell 2 percent in 2017 after hitting a record high in 2016, and are expected to drop further in 2018 as interest rates rise and more late-model used cars return to dealer lots to compete with new ones. GM said on Tuesday that while it retools a factory in Ft. Wayne, Indiana, to make the new pickup trucks, it will shift some production to an Oshawa, Ontario, plant in order to avoid missing sales in a hot market for the vehicles. The No. 1 U.S. automaker said it will record a $7 billion non-cash charge for its fourth-quarter 2017 earnings related to deferred tax assets. GM said it expects capital expenditure in 2018 of around $8.5 billion, about $1 billion of which will go toward funding self-driving car technology. Last week, the company said it is seeking U.S. government approval for a fully autonomous car — one without a steering wheel, brake pedal or accelerator pedal — to enter the automaker's first commercial ride-sharing fleet in 2019. GM said it expects 2017 earnings per share at the high end of its previously forecast range of $6 to $6.50.